libmdbx/docs/_restrictions.md

Restrictions & Caveats {#restrictions}
======================
In addition to those listed for some functions.


## Long-lived read transactions {#long-lived-read}
Avoid long-lived read transactions, especially in the scenarios with a
high rate of write transactions. Long-lived read transactions prevents
recycling pages retired/freed by newer write transactions, thus the
database can grow quickly.

Understanding the problem of long-lived read transactions requires some
explanation, but can be difficult for quick perception. So is is
reasonable to simplify this as follows:
  1. Garbage collection problem exists in all databases one way or
     another, e.g. VACUUM in PostgreSQL. But in MDBX it's even more
     discernible because of high transaction rate and intentional
     internals simplification in favor of performance.

  2. MDBX employs [Multiversion concurrency control](https://en.wikipedia.org/wiki/Multiversion_concurrency_control)
     on the [Copy-on-Write](https://en.wikipedia.org/wiki/Copy-on-write)
     basis, that allows multiple readers runs in parallel with a write
     transaction without blocking. An each write transaction needs free
     pages to put the changed data, that pages will be placed in the new
     b-tree snapshot at commit. MDBX efficiently recycling pages from
     previous created unused snapshots, BUT this is impossible if anyone
     a read transaction use such snapshot.

  3. Thus massive altering of data during a parallel long read operation
     will increase the process's work set and may exhaust entire free
     database space.

A good example of long readers is a hot backup to the slow destination
or debugging of a client application while retaining an active read
transaction. LMDB this results in `MDB_MAP_FULL` error and subsequent write
performance degradation.

MDBX mostly solve "long-lived" readers issue by offering to use a
transaction parking-and-ousting approach by \ref mdbx_txn_park(),
Handle-Slow-Readers \ref MDBX_hsr_func callback which allows to abort
long-lived read transactions, and using the \ref MDBX_LIFORECLAIM mode
which addresses subsequent performance degradation. The "next" version
of libmdbx (aka \ref MithrilDB) will completely solve this.

- Avoid suspending a process with active transactions. These would then be
  "long-lived" as above.

- Avoid aborting a process with an active read-only transaction in scenarios
  with high rate of write transactions. The transaction becomes "long-lived"
  as above until a check for stale readers is performed or the LCK-file is
  reset, since the process may not remove it from the lockfile. This does
  not apply to write transactions if the system clears stale writers, see
  above.


## Large data items and huge transactions

MDBX allows you to store values up to 1 gigabyte in size, but this is
not the main functionality for a key-value storage, but an additional
feature that should not be abused. Such long values are stored in
consecutive/adjacent DB pages, which has both pros and cons. This allows
you to read long values directly without copying and without any
overhead from a linear section of memory.

On the other hand, when putting such values in the database, it is
required to find a sufficient number of free consecutive/adjacent
database pages, which can be very difficult and expensive, moreover
sometimes impossible since b-tree tends to fragmentation. So, when
placing very long values, the engine may need to process the entire GC,
and in the absence of a sufficient sequence of free pages, increase the
DB file. Thus, for long values, MDBX provides maximum read performance
at the expense of write performance.

A similar situation can be with huge transactions, in which a lot of
database pages are retired. The retired pages should be put into GC as a
list of page numbers for future reuse. But in huge transactions, such a
list of retired page numbers can also be huge, i.e. it is a very long
value and requires a long sequence of free pages to be saved. Thus, if
you delete large amounts of information from the database in a single
transaction, MDBX may need to increase the database file to save the
list of pages to be retired.

Both of these issues will be addressed in MithrilDB.

#### Since v0.12.1 and later
Some aspects related to GC have been refined and improved, in particular:

  - The search for free consecutive/adjacent pages through GC has been
    significantly speeded, including acceleration using
    NOEN/SSE2/AVX2/AVX512 instructions.

  - The `Big Foot` feature which significantly reduces GC overhead for
    processing large lists of retired pages from huge transactions. Now
    libmdbx avoid creating large chunks of PNLs (page number lists) which
    required a long sequences of free pages, aka large/overflow pages. Thus
    avoiding searching, allocating and storing such sequences inside GC.


## Space reservation
An MDBX database configuration will often reserve considerable unused
memory address space and maybe file size for future growth. This does
not use actual memory or disk space, but users may need to understand
the difference so they won't be scared off.

However, on 64-bit systems with a relative small amount of RAM, such
reservation can deplete system resources (trigger ENOMEM error, etc)
when setting an inadequately large upper DB size using \ref
mdbx_env_set_geometry() or \ref mdbx::env::geometry. So just avoid this.


## Remote filesystems
Do not use MDBX databases on remote filesystems, even between processes
on the same host. This breaks file locks on some platforms, possibly
memory map sync, and certainly sync between programs on different hosts.

On the other hand, MDBX support the exclusive database operation over
a network, and cooperative read-only access to the database placed on
a read-only network shares.


## Child processes
Do not use opened \ref MDBX_env instance(s) in a child processes after `fork()`.
It would be insane to call fork() and any MDBX-functions simultaneously
from multiple threads. The best way is to prevent the presence of open
MDBX-instances during `fork()`.

The \ref MDBX_ENV_CHECKPID build-time option, which is ON by default on
non-Windows platforms (i.e. where `fork()` is available), enables PID
checking at a few critical points. But this does not give any guarantees,
but only allows you to detect such errors a little sooner. Depending on
the platform, you should expect an application crash and/or database
corruption in such cases.

On the other hand, MDBX allow calling \ref mdbx_env_close() in such cases to
release resources, but no more and in general this is a wrong way.

#### Since v0.13.1 and later
Начиная с версии 0.13.1 в API доступна функция \ref mdbx_env_resurrect_after_fork(),
которая позволяет пере-использовать в дочерних процессах уже открытую среду БД,
но строго без наследования транзакций от родительского процесса.


## Read-only mode
There is no pure read-only mode in a normal explicitly way, since
readers need write access to LCK-file to be ones visible for writer.

So MDBX always tries to open/create LCK-file for read-write, but switches
to without-LCK mode on appropriate errors (`EROFS`, `EACCESS`, `EPERM`)
if the read-only mode was requested by the \ref MDBX_RDONLY flag which is
described below.

The "next" version of libmdbx (\ref MithrilDB) will solve this issue for the "many
readers without writer" case.


## Troubleshooting the LCK-file
1. A broken LCK-file can cause sync issues, including appearance of
  wrong/inconsistent data for readers. When database opened in the
  cooperative read-write mode the LCK-file requires to be mapped to
  memory in read-write access. In this case it is always possible for
  stray/malfunctioned application could writes thru pointers to
  silently corrupt the LCK-file.

  Unfortunately, there is no any portable way to prevent such
  corruption, since the LCK-file is updated concurrently by
  multiple processes in a lock-free manner and any locking is
  unwise due to a large overhead.

  The "next" version of libmdbx (\ref MithrilDB) will solve this issue.

  \note Workaround: Just make all programs using the database close it;
  the LCK-file is always reset on first open.

2. Stale reader transactions left behind by an aborted program cause
  further writes to grow the database quickly, and stale locks can
  block further operation.
  MDBX checks for stale readers while opening environment and before
  growth the database. But in some cases, this may not be enough.

  \note Workaround: Check for stale readers periodically, using the
  \ref mdbx_reader_check() function or the mdbx_stat tool.

3. Stale writers will be cleared automatically by MDBX on supported
  platforms. But this is platform-specific, especially of
  implementation of shared POSIX-mutexes and support for robust
  mutexes. For instance there are no known issues on Linux, OSX,
  Windows and FreeBSD.

  \note Workaround: Otherwise just make all programs using the database
  close it; the LCK-file is always reset on first open of the environment.


## One thread - One transaction
A thread can only use one transaction at a time, plus any nested
read-write transactions in the non-writemap mode. Each transaction
belongs to one thread. The \ref MDBX_NOSTICKYTHREADS flag changes this,
see below.

Do not start more than one transaction for a one thread. If you think
about this, it's really strange to do something with two data snapshots
at once, which may be different. MDBX checks and preventing this by
returning corresponding error code (\ref MDBX_TXN_OVERLAPPING,
\ref MDBX_BAD_RSLOT, \ref MDBX_BUSY) unless you using
\ref MDBX_NOSTICKYTHREADS option on the environment.
Nonetheless, with the `MDBX_NOSTICKYTHREADS` option, you must know
exactly what you are doing, otherwise you will get deadlocks or reading
an alien data.


## Do not open twice
Do not have open an MDBX database twice in the same process at the same
time. By default MDBX prevent this in most cases by tracking databases
opening and return \ref MDBX_BUSY if anyone LCK-file is already open.

The reason for this is that when the "Open file description" locks (aka
OFD-locks) are not available, MDBX uses POSIX locks on files, and these
locks have issues if one process opens a file multiple times. If a single
process opens the same environment multiple times, closing it once will
remove all the locks held on it, and the other instances will be
vulnerable to corruption from other processes.

For compatibility with LMDB which allows multi-opening, MDBX can be
configured at runtime by `mdbx_setup_debug(MDBX_DBG_LEGACY_MULTIOPEN, ...)`
prior to calling other MDBX functions. In this way MDBX will track
databases opening, detect multi-opening cases and then recover POSIX file
locks as necessary. However, lock recovery can cause unexpected pauses,
such as when another process opened the database in exclusive mode before
the lock was restored - we have to wait until such a process releases the
database, and so on.