libmdbx/mdbx.h

/**

_libmdbx_ (aka MDBX) is an extremely fast, compact, powerful, embeddable,
transactional [key-value
store](https://en.wikipedia.org/wiki/Key-value_database), with [Apache 2.0
license](./LICENSE). _MDBX_ has a specific set of properties and capabilities,
focused on creating unique lightweight solutions with extraordinary performance.

_libmdbx_ is superior to [LMDB](https://bit.ly/26ts7tL) in terms of features
and reliability, not inferior in performance. In comparison to LMDB, _libmdbx_
makes many things just work perfectly, not silently and catastrophically
break down. _libmdbx_ supports Linux, Windows, MacOS, OSX, iOS, Android,
FreeBSD, DragonFly, Solaris, OpenSolaris, OpenIndiana, NetBSD, OpenBSD and other
systems compliant with POSIX.1-2008.

Please visit https://libmdbx.dqdkfa.ru for more information, documentation,
C++ API description and links to the origin git repo with the source code.
Questions, feedback and suggestions are welcome to the Telegram' group
https://t.me/libmdbx.

_The Future will (be) [Positive](https://www.ptsecurity.com). Всё будет хорошо._

\note The origin has been migrated to
[GitFlic](https://gitflic.ru/project/erthink/libmdbx) since on 2022-04-15 the
Github administration, without any warning nor explanation, deleted libmdbx
along with a lot of other projects, simultaneously blocking access for many
developers. For the same reason ~~Github~~ is blacklisted forever.

\section copyright LICENSE & COPYRIGHT
\copyright SPDX-License-Identifier: Apache-2.0
\note Please refer to the COPYRIGHT file for explanations license change,
credits and acknowledgments.
\author Леонид Юрьев aka Leonid Yuriev <leo@yuriev.ru> \date 2015-2024

*******************************************************************************/

#pragma once
#ifndef LIBMDBX_H
#define LIBMDBX_H

#if defined(__riscv) || defined(__riscv__) || defined(__RISCV) ||              \
    defined(__RISCV__)
#warning "The RISC-V architecture is intentionally insecure by design. \
  Please delete this admonition at your own risk, \
  if you make such decision informed and consciously. \
  Refer to https://clck.ru/32d9xH for more information."
#endif /* RISC-V */

#ifdef _MSC_VER
#pragma warning(push, 1)
#pragma warning(disable : 4548) /* expression before comma has no effect;      \
                                   expected expression with side - effect */
#pragma warning(disable : 4530) /* C++ exception handler used, but unwind      \
                                 * semantics are not enabled. Specify /EHsc */
#pragma warning(disable : 4577) /* 'noexcept' used with no exception handling  \
                                 * mode specified; termination on exception is \
                                 * not guaranteed. Specify /EHsc */
#endif                          /* _MSC_VER (warnings) */

/* *INDENT-OFF* */
/* clang-format off */
/**
 \file mdbx.h
 \brief The libmdbx C API header file.

 \defgroup c_api C API
 @{
 \defgroup c_err Error handling
 \defgroup c_opening Opening & Closing
 \defgroup c_transactions Transactions
 \defgroup c_dbi Tables
 \defgroup c_crud Create/Read/Update/Delete (see Quick Reference in details)

 \details
 \anchor c_crud_hints
# Quick Reference for Insert/Update/Delete operations

Historically, libmdbx inherits the API basis from LMDB, where it is often
difficult to select flags/options and functions for the desired operation.
So it is recommend using this hints.

## Tables with UNIQUE keys

In tables created without the \ref MDBX_DUPSORT option, keys are always
unique. Thus always a single value corresponds to the each key, and so there
are only a few cases of changing data.

| Case                                        | Flags to use        | Result                 |
|---------------------------------------------|---------------------|------------------------|
| _INSERTING_|||
|Key is absent → Insertion                    |\ref MDBX_NOOVERWRITE|Insertion               |
|Key exist → Error since key present          |\ref MDBX_NOOVERWRITE|Error \ref MDBX_KEYEXIST and return Present value|
| _UPSERTING_|||
|Key is absent → Insertion                    |\ref MDBX_UPSERT     |Insertion               |
|Key exist → Update                           |\ref MDBX_UPSERT     |Update                  |
|  _UPDATING_|||
|Key is absent → Error since no such key      |\ref MDBX_CURRENT    |Error \ref MDBX_NOTFOUND|
|Key exist → Update                           |\ref MDBX_CURRENT    |Update value            |
| _DELETING_|||
|Key is absent → Error since no such key      |\ref mdbx_del() or \ref mdbx_replace()|Error \ref MDBX_NOTFOUND|
|Key exist → Delete by key                    |\ref mdbx_del() with the parameter `data = NULL`|Deletion|
|Key exist → Delete by key with with data matching check|\ref mdbx_del() with the parameter `data` filled with the value which should be match for deletion|Deletion or \ref MDBX_NOTFOUND if the value does not match|
|Delete at the current cursor position        |\ref mdbx_cursor_del() with \ref MDBX_CURRENT flag|Deletion|
|Extract (read & delete) value by the key     |\ref mdbx_replace() with zero flag and parameter `new_data = NULL`|Returning a deleted value|


## Tables with NON-UNIQUE keys

In tables created with the \ref MDBX_DUPSORT (Sorted Duplicates) option, keys
may be non unique. Such non-unique keys in a key-value table may be treated
as a duplicates or as like a multiple values corresponds to keys.


| Case                                        | Flags to use        | Result                 |
|---------------------------------------------|---------------------|------------------------|
| _INSERTING_|||
|Key is absent → Insertion                    |\ref MDBX_NOOVERWRITE|Insertion|
|Key exist → Needn't to add new values        |\ref MDBX_NOOVERWRITE|Error \ref MDBX_KEYEXIST with returning the first value from those already present|
| _UPSERTING_|||
|Key is absent → Insertion                    |\ref MDBX_UPSERT     |Insertion|
|Key exist → Wanna to add new values          |\ref MDBX_UPSERT     |Add one more value to the key|
|Key exist → Replace all values with a new one|\ref MDBX_UPSERT + \ref MDBX_ALLDUPS|Overwrite by single new value|
|  _UPDATING_|||
|Key is absent → Error since no such key      |\ref MDBX_CURRENT    |Error \ref MDBX_NOTFOUND|
|Key exist, Single value → Update             |\ref MDBX_CURRENT    |Update single value    |
|Key exist, Multiple values → Replace all values with a new one|\ref MDBX_CURRENT + \ref MDBX_ALLDUPS|Overwrite by single new value|
|Key exist, Multiple values → Error since it is unclear which of the values should be updated|\ref mdbx_put() with \ref MDBX_CURRENT|Error \ref MDBX_EMULTIVAL|
|Key exist, Multiple values → Update particular entry of multi-value|\ref mdbx_replace() with \ref MDBX_CURRENT + \ref MDBX_NOOVERWRITE and the parameter `old_value` filled with the value that wanna to update|Update one multi-value entry|
|Key exist, Multiple values → Update the current entry of multi-value|\ref mdbx_cursor_put() with \ref MDBX_CURRENT|Update one multi-value entry|
| _DELETING_|||
|Key is absent → Error since no such key      |\ref mdbx_del() or \ref mdbx_replace()|Error \ref MDBX_NOTFOUND|
|Key exist → Delete all values corresponds given key|\ref mdbx_del() with the parameter `data = NULL`|Deletion|
|Key exist → Delete particular value corresponds given key|\ref mdbx_del() with the parameter `data` filled with the value that wanna to delete, or \ref mdbx_replace() with \ref MDBX_CURRENT + \ref MDBX_NOOVERWRITE and the `old_value` parameter filled with the value that wanna to delete and `new_data = NULL`| Deletion or \ref MDBX_NOTFOUND if no such key-value pair|
|Delete one value at the current cursor position|\ref mdbx_cursor_del() with \ref MDBX_CURRENT flag|Deletion only the current entry|
|Delete all values of key at the current cursor position|\ref mdbx_cursor_del() with with \ref MDBX_ALLDUPS flag|Deletion all duplicates of key (all multi-values) at the current cursor position|

 \defgroup c_cursors Cursors
 \defgroup c_statinfo Statistics & Information
 \defgroup c_settings Settings
 \defgroup c_debug Logging and runtime debug
 \defgroup c_rqest Range query estimation
 \defgroup c_extra Extra operations
*/
/* *INDENT-ON* */
/* clang-format on */

#include <stdarg.h>
#include <stddef.h>
#include <stdint.h>
#if !defined(NDEBUG) && !defined(assert)
#include <assert.h>
#endif /* NDEBUG */

#if defined(_WIN32) || defined(_WIN64)
#include <windows.h>
#include <winnt.h>
#ifndef __mode_t_defined
typedef unsigned short mdbx_mode_t;
#else
typedef mode_t mdbx_mode_t;
#endif /* __mode_t_defined */
typedef HANDLE mdbx_filehandle_t;
typedef DWORD mdbx_pid_t;
typedef DWORD mdbx_tid_t;
#else                  /* Windows */
#include <errno.h>     /* for error codes */
#include <pthread.h>   /* for pthread_t */
#include <sys/types.h> /* for pid_t */
#include <sys/uio.h>   /* for struct iovec */
#define HAVE_STRUCT_IOVEC 1
typedef int mdbx_filehandle_t;
typedef pid_t mdbx_pid_t;
typedef pthread_t mdbx_tid_t;
typedef mode_t mdbx_mode_t;
#endif /* !Windows */

#ifdef _MSC_VER
#pragma warning(pop)
#endif

/** end of c_api @}
 *
 * \defgroup api_macros Common Macros
 * @{ */

/*----------------------------------------------------------------------------*/

#ifndef __has_attribute
#define __has_attribute(x) (0)
#endif /* __has_attribute */

#ifndef __has_c_attribute
#define __has_c_attribute(x) (0)
#define __has_c_attribute_qualified(x) 0
#elif !defined(__STDC_VERSION__) || __STDC_VERSION__ < 202311L
#define __has_c_attribute_qualified(x) 0
#elif defined(_MSC_VER)
/* MSVC don't support `namespace::attr` syntax */
#define __has_c_attribute_qualified(x) 0
#else
#define __has_c_attribute_qualified(x) __has_c_attribute(x)
#endif /* __has_c_attribute */

#ifndef __has_cpp_attribute
#define __has_cpp_attribute(x) 0
#define __has_cpp_attribute_qualified(x) 0
#elif defined(_MSC_VER)
/* MSVC don't support `namespace::attr` syntax */
#define __has_cpp_attribute_qualified(x) 0
#else
#define __has_cpp_attribute_qualified(x) __has_cpp_attribute(x)
#endif /* __has_cpp_attribute */

#ifndef __has_C23_or_CXX_attribute
#if defined(__cplusplus)
#define __has_C23_or_CXX_attribute(x) __has_cpp_attribute_qualified(x)
#else
#define __has_C23_or_CXX_attribute(x) __has_c_attribute_qualified(x)
#endif
#endif /* __has_C23_or_CXX_attribute */

#ifndef __has_feature
#define __has_feature(x) (0)
#define __has_exceptions_disabled (0)
#elif !defined(__has_exceptions_disabled)
#define __has_exceptions_disabled                                              \
  (__has_feature(cxx_noexcept) && !__has_feature(cxx_exceptions))
#endif /* __has_feature */

#ifndef __has_extension
#define __has_extension(x) __has_feature(x)
#endif /* __has_extension */

#ifndef __has_builtin
#define __has_builtin(x) (0)
#endif /* __has_builtin */

/** \brief The 'pure' function attribute for optimization.
 * \details Many functions have no effects except the return value and their
 * return value depends only on the parameters and/or global variables.
 * Such a function can be subject to common subexpression elimination
 * and loop optimization just as an arithmetic operator would be.
 * These functions should be declared with the attribute pure. */
#if defined(DOXYGEN)
#define MDBX_PURE_FUNCTION [[gnu::pure]]
#elif __has_C23_or_CXX_attribute(gnu::pure)
#define MDBX_PURE_FUNCTION [[gnu::pure]]
#elif (defined(__GNUC__) || __has_attribute(__pure__)) &&                      \
    (!defined(__clang__) /* https://bugs.llvm.org/show_bug.cgi?id=43275 */ ||  \
     !defined(__cplusplus) || __has_exceptions_disabled)
#define MDBX_PURE_FUNCTION __attribute__((__pure__))
#else
#define MDBX_PURE_FUNCTION
#endif /* MDBX_PURE_FUNCTION */

/** \brief The 'pure nothrow' function attribute for optimization.
 * \details Like \ref MDBX_PURE_FUNCTION with addition `noexcept` restriction
 * that is compatible to CLANG and proposed [[pure]]. */
#if defined(DOXYGEN)
#define MDBX_NOTHROW_PURE_FUNCTION [[gnu::pure, gnu::nothrow]]
#elif __has_C23_or_CXX_attribute(gnu::pure)
#if __has_C23_or_CXX_attribute(gnu::nothrow)
#define MDBX_NOTHROW_PURE_FUNCTION [[gnu::pure, gnu::nothrow]]
#else
#define MDBX_NOTHROW_PURE_FUNCTION [[gnu::pure]]
#endif
#elif defined(__GNUC__) ||                                                     \
    (__has_attribute(__pure__) && __has_attribute(__nothrow__))
#define MDBX_NOTHROW_PURE_FUNCTION __attribute__((__pure__, __nothrow__))
#elif __has_cpp_attribute(pure)
#define MDBX_NOTHROW_PURE_FUNCTION [[pure]]
#else
#define MDBX_NOTHROW_PURE_FUNCTION
#endif /* MDBX_NOTHROW_PURE_FUNCTION */

/** \brief The 'const' function attribute for optimization.
 * \details Many functions do not examine any values except their arguments,
 * and have no effects except the return value. Basically this is just
 * slightly more strict class than the PURE attribute, since function
 * is not allowed to read global memory.
 *
 * Note that a function that has pointer arguments and examines the
 * data pointed to must not be declared const. Likewise, a function
 * that calls a non-const function usually must not be const.
 * It does not make sense for a const function to return void. */
#if defined(DOXYGEN)
#define MDBX_CONST_FUNCTION [[gnu::const]]
#elif __has_C23_or_CXX_attribute(gnu::const)
#define MDBX_CONST_FUNCTION [[gnu::const]]
#elif (defined(__GNUC__) || __has_attribute(__const__)) &&                     \
    (!defined(__clang__) /* https://bugs.llvm.org/show_bug.cgi?id=43275 */ ||  \
     !defined(__cplusplus) || __has_exceptions_disabled)
#define MDBX_CONST_FUNCTION __attribute__((__const__))
#else
#define MDBX_CONST_FUNCTION MDBX_PURE_FUNCTION
#endif /* MDBX_CONST_FUNCTION */

/** \brief The 'const nothrow' function attribute for optimization.
 * \details Like \ref MDBX_CONST_FUNCTION with addition `noexcept` restriction
 * that is compatible to CLANG and future [[const]]. */
#if defined(DOXYGEN)
#define MDBX_NOTHROW_CONST_FUNCTION [[gnu::const, gnu::nothrow]]
#elif __has_C23_or_CXX_attribute(gnu::const)
#if __has_C23_or_CXX_attribute(gnu::nothrow)
#define MDBX_NOTHROW_CONST_FUNCTION [[gnu::const, gnu::nothrow]]
#else
#define MDBX_NOTHROW_CONST_FUNCTION [[gnu::const]]
#endif
#elif defined(__GNUC__) ||                                                     \
    (__has_attribute(__const__) && __has_attribute(__nothrow__))
#define MDBX_NOTHROW_CONST_FUNCTION __attribute__((__const__, __nothrow__))
#elif __has_cpp_attribute_qualified(const)
#define MDBX_NOTHROW_CONST_FUNCTION [[const]]
#else
#define MDBX_NOTHROW_CONST_FUNCTION MDBX_NOTHROW_PURE_FUNCTION
#endif /* MDBX_NOTHROW_CONST_FUNCTION */

/** \brief The 'deprecated' attribute to produce warnings when used.
 * \note This macro may be predefined as empty to avoid "deprecated" warnings.
 */
#ifndef MDBX_DEPRECATED
#ifdef __deprecated
#define MDBX_DEPRECATED __deprecated
#elif defined(DOXYGEN) ||                                                      \
    ((!defined(__GNUC__) || defined(__clang__) || __GNUC__ > 5) &&             \
     ((defined(__cplusplus) && __cplusplus >= 201403L &&                       \
       __has_cpp_attribute(deprecated) &&                                      \
       __has_cpp_attribute(deprecated) >= 201309L) ||                          \
      (!defined(__cplusplus) && defined(__STDC_VERSION__) &&                   \
       __STDC_VERSION__ >= 202304L)))
#define MDBX_DEPRECATED [[deprecated]]
#elif (defined(__GNUC__) && __GNUC__ > 5) ||                                   \
    (__has_attribute(__deprecated__) &&                                        \
     (!defined(__GNUC__) || defined(__clang__) || __GNUC__ > 5))
#define MDBX_DEPRECATED __attribute__((__deprecated__))
#elif defined(_MSC_VER)
#define MDBX_DEPRECATED __declspec(deprecated)
#else
#define MDBX_DEPRECATED
#endif
#endif /* MDBX_DEPRECATED */

#ifndef MDBX_DEPRECATED_ENUM
#if !defined(DOXYGEN) &&                                                       \
    (!defined(_MSC_VER) || (defined(__cplusplus) && __cplusplus >= 201403L &&  \
                            __has_cpp_attribute(deprecated) &&                 \
                            __has_cpp_attribute(deprecated) >= 201309L))
#define MDBX_DEPRECATED_ENUM MDBX_DEPRECATED
#else
#define MDBX_DEPRECATED_ENUM /* avoid madness MSVC */
#endif
#endif /* MDBX_DEPRECATED_ENUM */

#ifndef __dll_export
#if defined(_WIN32) || defined(_WIN64) || defined(__CYGWIN__) ||               \
    defined(__MINGW__) || defined(__MINGW32__) || defined(__MINGW64__)
#if defined(__GNUC__) || __has_attribute(__dllexport__)
#define __dll_export __attribute__((__dllexport__))
#elif defined(_MSC_VER)
#define __dll_export __declspec(dllexport)
#else
#define __dll_export
#endif
#elif defined(__GNUC__) || __has_attribute(__visibility__)
#define __dll_export __attribute__((__visibility__("default")))
#else
#define __dll_export
#endif
#endif /* __dll_export */

#ifndef __dll_import
#if defined(_WIN32) || defined(_WIN64) || defined(__CYGWIN__) ||               \
    defined(__MINGW__) || defined(__MINGW32__) || defined(__MINGW64__)
#if defined(__GNUC__) || __has_attribute(__dllimport__)
#define __dll_import __attribute__((__dllimport__))
#elif defined(_MSC_VER)
#define __dll_import __declspec(dllimport)
#else
#define __dll_import
#endif
#else
#define __dll_import
#endif
#endif /* __dll_import */

/** \brief Auxiliary macro for robustly define the both inline version of API
 * function and non-inline fallback dll-exported version for applications linked
 * with old version of libmdbx, with a strictly ODR-common implementation. Thus,
 * we emulate __extern_inline for all compilers, including non-GNU ones. */
#if defined(LIBMDBX_INTERNALS) && !defined(LIBMDBX_NO_EXPORTS_LEGACY_API)
#define LIBMDBX_INLINE_API(TYPE, NAME, ARGS)                                   \
  /* proto of exported which uses common impl */ LIBMDBX_API TYPE NAME ARGS;   \
  /* definition of common impl */ static __inline TYPE __inline_##NAME ARGS
#else
#define LIBMDBX_INLINE_API(TYPE, NAME, ARGS) static __inline TYPE NAME ARGS
#endif /* LIBMDBX_INLINE_API */

/** \brief Converts a macro argument into a string constant. */
#ifndef MDBX_STRINGIFY
#define MDBX_STRINGIFY_HELPER(x) #x
#define MDBX_STRINGIFY(x) MDBX_STRINGIFY_HELPER(x)
#endif /* MDBX_STRINGIFY */

/*----------------------------------------------------------------------------*/

#ifndef __cplusplus
#ifndef bool
#define bool _Bool
#endif
#ifndef true
#define true (1)
#endif
#ifndef false
#define false (0)
#endif
#endif /* bool without __cplusplus */

/** Workaround for old compilers without support for C++17 `noexcept`. */
#if defined(DOXYGEN)
#define MDBX_CXX17_NOEXCEPT noexcept
#elif !defined(__cpp_noexcept_function_type) ||                                \
    __cpp_noexcept_function_type < 201510L
#define MDBX_CXX17_NOEXCEPT
#else
#define MDBX_CXX17_NOEXCEPT noexcept
#endif /* MDBX_CXX17_NOEXCEPT */

/** Workaround for old compilers without support for any kind of `constexpr`. */
#if defined(DOXYGEN)
#define MDBX_CXX01_CONSTEXPR constexpr
#define MDBX_CXX01_CONSTEXPR_VAR constexpr
#elif !defined(__cplusplus)
#define MDBX_CXX01_CONSTEXPR __inline
#define MDBX_CXX01_CONSTEXPR_VAR const
#elif !defined(DOXYGEN) &&                                                     \
    ((__cplusplus < 201103L && defined(__cpp_constexpr) &&                     \
      __cpp_constexpr < 200704L) ||                                            \
     (defined(__LCC__) && __LCC__ < 124) ||                                    \
     (defined(__GNUC__) && (__GNUC__ * 100 + __GNUC_MINOR__ < 407) &&          \
      !defined(__clang__) && !defined(__LCC__)) ||                             \
     (defined(_MSC_VER) && _MSC_VER < 1910) ||                                 \
     (defined(__clang__) && __clang_major__ < 4))
#define MDBX_CXX01_CONSTEXPR inline
#define MDBX_CXX01_CONSTEXPR_VAR const
#else
#define MDBX_CXX01_CONSTEXPR constexpr
#define MDBX_CXX01_CONSTEXPR_VAR constexpr
#endif /* MDBX_CXX01_CONSTEXPR */

/** Workaround for old compilers without properly support for C++11 `constexpr`.
 */
#if defined(DOXYGEN)
#define MDBX_CXX11_CONSTEXPR constexpr
#define MDBX_CXX11_CONSTEXPR_VAR constexpr
#elif !defined(__cplusplus)
#define MDBX_CXX11_CONSTEXPR __inline
#define MDBX_CXX11_CONSTEXPR_VAR const
#elif !defined(DOXYGEN) &&                                                     \
    (!defined(__cpp_constexpr) || __cpp_constexpr < 201304L ||                 \
     (defined(__LCC__) && __LCC__ < 124) ||                                    \
     (defined(__GNUC__) && __GNUC__ < 6 && !defined(__clang__) &&              \
      !defined(__LCC__)) ||                                                    \
     (defined(_MSC_VER) && _MSC_VER < 1910) ||                                 \
     (defined(__clang__) && __clang_major__ < 5))
#define MDBX_CXX11_CONSTEXPR inline
#define MDBX_CXX11_CONSTEXPR_VAR const
#else
#define MDBX_CXX11_CONSTEXPR constexpr
#define MDBX_CXX11_CONSTEXPR_VAR constexpr
#endif /* MDBX_CXX11_CONSTEXPR */

/** Workaround for old compilers without properly support for C++14 `constexpr`.
 */
#if defined(DOXYGEN)
#define MDBX_CXX14_CONSTEXPR constexpr
#define MDBX_CXX14_CONSTEXPR_VAR constexpr
#elif !defined(__cplusplus)
#define MDBX_CXX14_CONSTEXPR __inline
#define MDBX_CXX14_CONSTEXPR_VAR const
#elif defined(DOXYGEN) ||                                                      \
    defined(__cpp_constexpr) && __cpp_constexpr >= 201304L &&                  \
        ((defined(_MSC_VER) && _MSC_VER >= 1910) ||                            \
         (defined(__clang__) && __clang_major__ > 4) ||                        \
         (defined(__GNUC__) && __GNUC__ > 6) ||                                \
         (!defined(__GNUC__) && !defined(__clang__) && !defined(_MSC_VER)))
#define MDBX_CXX14_CONSTEXPR constexpr
#define MDBX_CXX14_CONSTEXPR_VAR constexpr
#else
#define MDBX_CXX14_CONSTEXPR inline
#define MDBX_CXX14_CONSTEXPR_VAR const
#endif /* MDBX_CXX14_CONSTEXPR */

#if defined(__noreturn)
#define MDBX_NORETURN __noreturn
#elif defined(_Noreturn)
#define MDBX_NORETURN _Noreturn
#elif defined(DOXYGEN) || (defined(__cplusplus) && __cplusplus >= 201103L) ||  \
    (!defined(__cplusplus) && defined(__STDC_VERSION__) &&                     \
     __STDC_VERSION__ > 202005L)
#define MDBX_NORETURN [[noreturn]]
#elif defined(__GNUC__) || __has_attribute(__noreturn__)
#define MDBX_NORETURN __attribute__((__noreturn__))
#elif defined(_MSC_VER) && !defined(__clang__)
#define MDBX_NORETURN __declspec(noreturn)
#else
#define MDBX_NORETURN
#endif /* MDBX_NORETURN */

#ifndef MDBX_PRINTF_ARGS
#if defined(__GNUC__) || __has_attribute(__format__) || defined(DOXYGEN)
#if defined(__MINGW__) || defined(__MINGW32__) || defined(__MINGW64__)
#define MDBX_PRINTF_ARGS(format_index, first_arg)                              \
  __attribute__((__format__(__gnu_printf__, format_index, first_arg)))
#else
#define MDBX_PRINTF_ARGS(format_index, first_arg)                              \
  __attribute__((__format__(__printf__, format_index, first_arg)))
#endif /* MinGW */
#else
#define MDBX_PRINTF_ARGS(format_index, first_arg)
#endif
#endif /* MDBX_PRINTF_ARGS */

#if defined(DOXYGEN) ||                                                        \
    (defined(__cplusplus) && __cplusplus >= 201603L &&                         \
     __has_cpp_attribute(maybe_unused) &&                                      \
     __has_cpp_attribute(maybe_unused) >= 201603L) ||                          \
    (!defined(__cplusplus) && defined(__STDC_VERSION__) &&                     \
     __STDC_VERSION__ > 202005L)
#define MDBX_MAYBE_UNUSED [[maybe_unused]]
#elif defined(__GNUC__) || __has_attribute(__unused__)
#define MDBX_MAYBE_UNUSED __attribute__((__unused__))
#else
#define MDBX_MAYBE_UNUSED
#endif /* MDBX_MAYBE_UNUSED */

#if __has_attribute(no_sanitize) || defined(DOXYGEN)
#define MDBX_NOSANITIZE_ENUM __attribute((__no_sanitize__("enum")))
#else
#define MDBX_NOSANITIZE_ENUM
#endif /* MDBX_NOSANITIZE_ENUM */

/* Oh, below are some songs and dances since:
 *  - C++ requires explicit definition of the necessary operators.
 *  - the proper implementation of DEFINE_ENUM_FLAG_OPERATORS for C++ required
 *    the constexpr feature which is broken in most old compilers;
 *  - DEFINE_ENUM_FLAG_OPERATORS may be defined broken as in the Windows SDK. */
#if !defined(DEFINE_ENUM_FLAG_OPERATORS) && !defined(DOXYGEN)

#ifdef __cplusplus
#if !defined(__cpp_constexpr) || __cpp_constexpr < 200704L ||                  \
    (defined(__LCC__) && __LCC__ < 124) ||                                     \
    (defined(__GNUC__) && (__GNUC__ * 100 + __GNUC_MINOR__ < 407) &&           \
     !defined(__clang__) && !defined(__LCC__)) ||                              \
    (defined(_MSC_VER) && _MSC_VER < 1910) ||                                  \
    (defined(__clang__) && __clang_major__ < 4)
/* The constexpr feature is not available or (may be) broken */
#define CONSTEXPR_ENUM_FLAGS_OPERATIONS 0
#else
/* C always allows these operators for enums */
#define CONSTEXPR_ENUM_FLAGS_OPERATIONS 1
#endif /* __cpp_constexpr */

/// Define operator overloads to enable bit operations on enum values that are
/// used to define flags (based on Microsoft's DEFINE_ENUM_FLAG_OPERATORS).
#define DEFINE_ENUM_FLAG_OPERATORS(ENUM)                                       \
  extern "C++" {                                                               \
  MDBX_NOSANITIZE_ENUM MDBX_CXX01_CONSTEXPR ENUM operator|(ENUM a, ENUM b) {   \
    return ENUM(unsigned(a) | unsigned(b));                                    \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX14_CONSTEXPR ENUM &operator|=(ENUM &a,          \
                                                             ENUM b) {         \
    return a = a | b;                                                          \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX01_CONSTEXPR ENUM operator&(ENUM a, ENUM b) {   \
    return ENUM(unsigned(a) & unsigned(b));                                    \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX01_CONSTEXPR ENUM operator&(ENUM a,             \
                                                           unsigned b) {       \
    return ENUM(unsigned(a) & b);                                              \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX01_CONSTEXPR ENUM operator&(unsigned a,         \
                                                           ENUM b) {           \
    return ENUM(a & unsigned(b));                                              \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX14_CONSTEXPR ENUM &operator&=(ENUM &a,          \
                                                             ENUM b) {         \
    return a = a & b;                                                          \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX14_CONSTEXPR ENUM &operator&=(ENUM &a,          \
                                                             unsigned b) {     \
    return a = a & b;                                                          \
  }                                                                            \
  MDBX_CXX01_CONSTEXPR unsigned operator~(ENUM a) { return ~unsigned(a); }     \
  MDBX_NOSANITIZE_ENUM MDBX_CXX01_CONSTEXPR ENUM operator^(ENUM a, ENUM b) {   \
    return ENUM(unsigned(a) ^ unsigned(b));                                    \
  }                                                                            \
  MDBX_NOSANITIZE_ENUM MDBX_CXX14_CONSTEXPR ENUM &operator^=(ENUM &a,          \
                                                             ENUM b) {         \
    return a = a ^ b;                                                          \
  }                                                                            \
  }
#else /* __cplusplus */
/* nope for C since it always allows these operators for enums */
#define DEFINE_ENUM_FLAG_OPERATORS(ENUM)
#define CONSTEXPR_ENUM_FLAGS_OPERATIONS 1
#endif /* !__cplusplus */

#elif !defined(CONSTEXPR_ENUM_FLAGS_OPERATIONS)

#ifdef __cplusplus
/* DEFINE_ENUM_FLAG_OPERATORS may be defined broken as in the Windows SDK */
#define CONSTEXPR_ENUM_FLAGS_OPERATIONS 0
#else
/* C always allows these operators for enums */
#define CONSTEXPR_ENUM_FLAGS_OPERATIONS 1
#endif

#endif /* DEFINE_ENUM_FLAG_OPERATORS */

/** end of api_macros @} */

/*----------------------------------------------------------------------------*/

/** \addtogroup c_api
 * @{ */

#ifdef __cplusplus
extern "C" {
#endif

/* MDBX version 0.13.x */
#define MDBX_VERSION_MAJOR 0
#define MDBX_VERSION_MINOR 13

#ifndef LIBMDBX_API
#if defined(LIBMDBX_EXPORTS) || defined(DOXYGEN)
#define LIBMDBX_API __dll_export
#elif defined(LIBMDBX_IMPORTS)
#define LIBMDBX_API __dll_import
#else
#define LIBMDBX_API
#endif
#endif /* LIBMDBX_API */

#ifdef __cplusplus
#if defined(__clang__) || __has_attribute(type_visibility) || defined(DOXYGEN)
#define LIBMDBX_API_TYPE LIBMDBX_API __attribute__((type_visibility("default")))
#else
#define LIBMDBX_API_TYPE LIBMDBX_API
#endif
#else
#define LIBMDBX_API_TYPE
#endif /* LIBMDBX_API_TYPE */

#if defined(LIBMDBX_IMPORTS)
#define LIBMDBX_VERINFO_API __dll_import
#else
#define LIBMDBX_VERINFO_API __dll_export
#endif /* LIBMDBX_VERINFO_API */

/** \brief libmdbx version information */
extern LIBMDBX_VERINFO_API const struct MDBX_version_info {
  uint8_t major;     /**< Major version number */
  uint8_t minor;     /**< Minor version number */
  uint16_t release;  /**< Release number of Major.Minor */
  uint32_t revision; /**< Revision number of Release */
  struct {
    const char *datetime; /**< committer date, strict ISO-8601 format */
    const char *tree;     /**< commit hash (hexadecimal digits) */
    const char *commit;   /**< tree hash, i.e. digest of the source code */
    const char *describe; /**< git-describe string */
  } git;                  /**< source information from git */
  const char *sourcery;   /**< sourcery anchor for pinning */
} /** \brief libmdbx version information */ mdbx_version;

/** \brief libmdbx build information
 * \attention Some strings could be NULL in case no corresponding information
 *            was provided at build time (i.e. flags). */
extern LIBMDBX_VERINFO_API const struct MDBX_build_info {
  const char *datetime; /**< build timestamp (ISO-8601 or __DATE__ __TIME__) */
  const char *target;   /**< cpu/arch-system-config triplet */
  const char *options;  /**< mdbx-related options */
  const char *compiler; /**< compiler */
  const char *flags;    /**< CFLAGS and CXXFLAGS */
  const char *metadata; /**< an extra/custom information provided via
                             the MDBX_BUILD_METADATA definition
                             during library build */
} /** \brief libmdbx build information */ mdbx_build;

#if (defined(_WIN32) || defined(_WIN64)) && !MDBX_BUILD_SHARED_LIBRARY
/* MDBX internally uses global and thread local storage destructors to
 * automatically (de)initialization, releasing reader lock table slots
 * and so on.
 *
 * If MDBX built as a DLL this is done out-of-the-box by DllEntry() function,
 * which called automatically by Windows core with passing corresponding reason
 * argument.
 *
 * Otherwise, if MDBX was built not as a DLL, some black magic
 * may be required depending of Windows version:
 *
 *  - Modern Windows versions, including Windows Vista and later, provides
 *    support for "TLS Directory" (e.g .CRT$XL[A-Z] sections in executable
 *    or dll file). In this case, MDBX capable of doing all automatically,
 *    therefore you DON'T NEED to call mdbx_module_handler()
 *    so the MDBX_MANUAL_MODULE_HANDLER defined as 0.
 *
 *  - Obsolete versions of Windows, prior to Windows Vista, REQUIRES calling
 *    mdbx_module_handler() manually from corresponding DllMain() or WinMain()
 *    of your DLL or application,
 *    so the MDBX_MANUAL_MODULE_HANDLER defined as 1.
 *
 * Therefore, building MDBX as a DLL is recommended for all version of Windows.
 * So, if you doubt, just build MDBX as the separate DLL and don't care about
 * the MDBX_MANUAL_MODULE_HANDLER. */

#ifndef _WIN32_WINNT
#error Non-dll build libmdbx requires target Windows version \
  to be explicitly defined via _WIN32_WINNT for properly \
  handling thread local storage destructors.
#endif /* _WIN32_WINNT */

#if _WIN32_WINNT >= 0x0600 /* Windows Vista */
/* As described above mdbx_module_handler() is NOT needed for Windows Vista
 * and later. */
#define MDBX_MANUAL_MODULE_HANDLER 0
#else
/* As described above mdbx_module_handler() IS REQUIRED for Windows versions
 * prior to Windows Vista. */
#define MDBX_MANUAL_MODULE_HANDLER 1
void LIBMDBX_API NTAPI mdbx_module_handler(PVOID module, DWORD reason,
                                           PVOID reserved);
#endif

#endif /* Windows && !DLL && MDBX_MANUAL_MODULE_HANDLER */

/* OPACITY STRUCTURES *********************************************************/

/** \brief Opaque structure for a database environment.
 * \details An environment supports multiple key-value tables (aka key-value
 * maps, spaces or sub-databases), all residing in the same shared-memory map.
 * \see mdbx_env_create() \see mdbx_env_close() */
#ifndef __cplusplus
typedef struct MDBX_env MDBX_env;
#else
struct MDBX_env;
#endif

/** \brief Opaque structure for a transaction handle.
 * \ingroup c_transactions
 * \details All table operations require a transaction handle. Transactions
 * may be read-only or read-write.
 * \see mdbx_txn_begin() \see mdbx_txn_commit() \see mdbx_txn_abort() */
#ifndef __cplusplus
typedef struct MDBX_txn MDBX_txn;
#else
struct MDBX_txn;
#endif

/** \brief A handle for an individual table (key-value spaces) in the
 * environment.
 * \ingroup c_dbi
 * \details Zero handle is used internally (hidden Garbage Collection table).
 * So, any valid DBI-handle great than 0 and less than or equal
 * \ref MDBX_MAX_DBI.
 * \see mdbx_dbi_open() \see mdbx_dbi_close() */
typedef uint32_t MDBX_dbi;

/** \brief Opaque structure for navigating through a table
 * \ingroup c_cursors
 * \see mdbx_cursor_create() \see mdbx_cursor_bind() \see mdbx_cursor_close()
 */
#ifndef __cplusplus
typedef struct MDBX_cursor MDBX_cursor;
#else
struct MDBX_cursor;
#endif

/** \brief Generic structure used for passing keys and data in and out of the
 * table.
 * \anchor MDBX_val \see mdbx::slice \see mdbx::buffer
 *
 * \details Values returned from the table are valid only until a subsequent
 * update operation, or the end of the transaction. Do not modify or
 * free them, they commonly point into the database itself.
 *
 * Key sizes must be between 0 and \ref mdbx_env_get_maxkeysize() inclusive.
 * The same applies to data sizes in tables with the \ref MDBX_DUPSORT flag.
 * Other data items can in theory be from 0 to \ref MDBX_MAXDATASIZE bytes long.
 *
 * \note The notable difference between MDBX and LMDB is that MDBX support zero
 * length keys. */
#ifndef HAVE_STRUCT_IOVEC
struct iovec {
  void *iov_base; /**< pointer to some data */
  size_t iov_len; /**< the length of data in bytes */
};
#define HAVE_STRUCT_IOVEC
#endif /* HAVE_STRUCT_IOVEC */

#if defined(__sun) || defined(__SVR4) || defined(__svr4__)
/* The `iov_len` is signed on Sun/Solaris.
 * So define custom MDBX_val to avoid a lot of warnings. */
struct MDBX_val {
  void *iov_base; /**< pointer to some data */
  size_t iov_len; /**< the length of data in bytes */
};
#ifndef __cplusplus
typedef struct MDBX_val MDBX_val;
#endif
#else  /* SunOS */
typedef struct iovec MDBX_val;
#endif /* ! SunOS */

enum MDBX_constants {
  /** The hard limit for DBI handles. */
  MDBX_MAX_DBI = UINT32_C(32765),

  /** The maximum size of a data item. */
  MDBX_MAXDATASIZE = UINT32_C(0x7fff0000),

  /** The minimal database page size in bytes. */
  MDBX_MIN_PAGESIZE = 256,

  /** The maximal database page size in bytes. */
  MDBX_MAX_PAGESIZE = 65536,
};

/* THE FILES *******************************************************************
 * At the file system level, the environment corresponds to a pair of files. */

#ifndef MDBX_LOCKNAME
/** \brief The name of the lock file in the environment
 * without using \ref MDBX_NOSUBDIR */
#if !(defined(_WIN32) || defined(_WIN64))
#define MDBX_LOCKNAME "/mdbx.lck"
#else
#define MDBX_LOCKNAME_W L"\\mdbx.lck"
#define MDBX_LOCKNAME_A "\\mdbx.lck"
#ifdef UNICODE
#define MDBX_LOCKNAME MDBX_LOCKNAME_W
#else
#define MDBX_LOCKNAME MDBX_LOCKNAME_A
#endif /* UNICODE */
#endif /* Windows */
#endif /* MDBX_LOCKNAME */
#ifndef MDBX_DATANAME
/** \brief The name of the data file in the environment
 * without using \ref MDBX_NOSUBDIR */
#if !(defined(_WIN32) || defined(_WIN64))
#define MDBX_DATANAME "/mdbx.dat"
#else
#define MDBX_DATANAME_W L"\\mdbx.dat"
#define MDBX_DATANAME_A "\\mdbx.dat"
#ifdef UNICODE
#define MDBX_DATANAME MDBX_DATANAME_W
#else
#define MDBX_DATANAME MDBX_DATANAME_A
#endif /* UNICODE */
#endif /* Windows */
#endif /* MDBX_DATANAME */

#ifndef MDBX_LOCK_SUFFIX
/** \brief The suffix of the lock file when \ref MDBX_NOSUBDIR is used */
#if !(defined(_WIN32) || defined(_WIN64))
#define MDBX_LOCK_SUFFIX "-lck"
#else
#define MDBX_LOCK_SUFFIX_W L"-lck"
#define MDBX_LOCK_SUFFIX_A "-lck"
#ifdef UNICODE
#define MDBX_LOCK_SUFFIX MDBX_LOCK_SUFFIX_W
#else
#define MDBX_LOCK_SUFFIX MDBX_LOCK_SUFFIX_A
#endif /* UNICODE */
#endif /* Windows */
#endif /* MDBX_LOCK_SUFFIX */

/* DEBUG & LOGGING ************************************************************/

/** \addtogroup c_debug
 * \note Most of debug feature enabled only when libmdbx built with
 * \ref MDBX_DEBUG build option. @{ */

/** Log level
 * \note Levels detailed than (great than) \ref MDBX_LOG_NOTICE
 * requires build libmdbx with \ref MDBX_DEBUG option. */
typedef enum MDBX_log_level {
  /** Critical conditions, i.e. assertion failures.
   * \note libmdbx always produces such messages regardless
   * of \ref MDBX_DEBUG build option. */
  MDBX_LOG_FATAL = 0,

  /** Enables logging for error conditions
   * and \ref MDBX_LOG_FATAL.
   * \note libmdbx always produces such messages regardless
   * of \ref MDBX_DEBUG build option. */
  MDBX_LOG_ERROR = 1,

  /** Enables logging for warning conditions
   * and \ref MDBX_LOG_ERROR ... \ref MDBX_LOG_FATAL.
   * \note libmdbx always produces such messages regardless
   * of \ref MDBX_DEBUG build option. */
  MDBX_LOG_WARN = 2,

  /** Enables logging for normal but significant condition
   * and \ref MDBX_LOG_WARN ... \ref MDBX_LOG_FATAL.
   * \note libmdbx always produces such messages regardless
   * of \ref MDBX_DEBUG build option. */
  MDBX_LOG_NOTICE = 3,

  /** Enables logging for verbose informational
   * and \ref MDBX_LOG_NOTICE ... \ref MDBX_LOG_FATAL.
   * \note Requires build libmdbx with \ref MDBX_DEBUG option. */
  MDBX_LOG_VERBOSE = 4,

  /** Enables logging for debug-level messages
   * and \ref MDBX_LOG_VERBOSE ... \ref MDBX_LOG_FATAL.
   * \note Requires build libmdbx with \ref MDBX_DEBUG option. */
  MDBX_LOG_DEBUG = 5,

  /** Enables logging for trace debug-level messages
   * and \ref MDBX_LOG_DEBUG ... \ref MDBX_LOG_FATAL.
   * \note Requires build libmdbx with \ref MDBX_DEBUG option. */
  MDBX_LOG_TRACE = 6,

  /** Enables extra debug-level messages (dump pgno lists)
   * and all other log-messages.
   * \note Requires build libmdbx with \ref MDBX_DEBUG option. */
  MDBX_LOG_EXTRA = 7,

#ifdef ENABLE_UBSAN
  MDBX_LOG_MAX = 7 /* avoid UBSAN false-positive trap by a tests */,
#endif /* ENABLE_UBSAN */

  /** for \ref mdbx_setup_debug() only: Don't change current settings */
  MDBX_LOG_DONTCHANGE = -1
} MDBX_log_level_t;

/** \brief Runtime debug flags
 *
 * \details `MDBX_DBG_DUMP` and `MDBX_DBG_LEGACY_MULTIOPEN` always have an
 * effect, but `MDBX_DBG_ASSERT`, `MDBX_DBG_AUDIT` and `MDBX_DBG_JITTER` only if
 * libmdbx built with \ref MDBX_DEBUG. */
typedef enum MDBX_debug_flags {
  MDBX_DBG_NONE = 0,

  /** Enable assertion checks.
   * \note Always enabled for builds with `MDBX_FORCE_ASSERTIONS` option,
   * otherwise requires build with \ref MDBX_DEBUG > 0 */
  MDBX_DBG_ASSERT = 1,

  /** Enable pages usage audit at commit transactions.
   * \note Requires build with \ref MDBX_DEBUG > 0 */
  MDBX_DBG_AUDIT = 2,

  /** Enable small random delays in critical points.
   * \note Requires build with \ref MDBX_DEBUG > 0 */
  MDBX_DBG_JITTER = 4,

  /** Include or not meta-pages in coredump files.
   * \note May affect performance in \ref MDBX_WRITEMAP mode */
  MDBX_DBG_DUMP = 8,

  /** Allow multi-opening environment(s) */
  MDBX_DBG_LEGACY_MULTIOPEN = 16,

  /** Allow read and write transactions overlapping for the same thread. */
  MDBX_DBG_LEGACY_OVERLAP = 32,

  /** Don't auto-upgrade format signature.
   * \note However a new write transactions will use and store
   * the last signature regardless this flag */
  MDBX_DBG_DONT_UPGRADE = 64,

#ifdef ENABLE_UBSAN
  MDBX_DBG_MAX = ((unsigned)MDBX_LOG_MAX) << 16 |
                 127 /* avoid UBSAN false-positive trap by a tests */,
#endif /* ENABLE_UBSAN */

  /** for mdbx_setup_debug() only: Don't change current settings */
  MDBX_DBG_DONTCHANGE = -1
} MDBX_debug_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_debug_flags)

/** \brief A debug-logger callback function,
 * called before printing the message and aborting.
 * \see mdbx_setup_debug()
 *
 * \param [in] loglevel  The severity of message.
 * \param [in] function  The function name which emits message,
 *                       may be NULL.
 * \param [in] line      The source code line number which emits message,
 *                       may be zero.
 * \param [in] fmt       The printf-like format string with message.
 * \param [in] args      The variable argument list respectively for the
 *                       format-message string passed by `fmt` argument.
 *                       Maybe NULL or invalid if the format-message string
 *                       don't contain `%`-specification of arguments. */
typedef void MDBX_debug_func(MDBX_log_level_t loglevel, const char *function,
                             int line, const char *fmt,
                             va_list args) MDBX_CXX17_NOEXCEPT;

/** \brief The "don't change `logger`" value for mdbx_setup_debug() */
#define MDBX_LOGGER_DONTCHANGE ((MDBX_debug_func *)(intptr_t)-1)
#define MDBX_LOGGER_NOFMT_DONTCHANGE ((MDBX_debug_func_nofmt *)(intptr_t)-1)

/** \brief Setup global log-level, debug options and debug logger.
 * \returns The previously `debug_flags` in the 0-15 bits
 *          and `log_level` in the 16-31 bits. */
LIBMDBX_API int mdbx_setup_debug(MDBX_log_level_t log_level,
                                 MDBX_debug_flags_t debug_flags,
                                 MDBX_debug_func *logger);

typedef void MDBX_debug_func_nofmt(MDBX_log_level_t loglevel,
                                   const char *function, int line,
                                   const char *msg,
                                   unsigned length) MDBX_CXX17_NOEXCEPT;

LIBMDBX_API int mdbx_setup_debug_nofmt(MDBX_log_level_t log_level,
                                       MDBX_debug_flags_t debug_flags,
                                       MDBX_debug_func_nofmt *logger,
                                       char *logger_buffer,
                                       size_t logger_buffer_size);

/** \brief A callback function for most MDBX assert() failures,
 * called before printing the message and aborting.
 * \see mdbx_env_set_assert()
 *
 * \param [in] env       An environment handle.
 * \param [in] msg       The assertion message, not including newline.
 * \param [in] function  The function name where the assertion check failed,
 *                       may be NULL.
 * \param [in] line      The line number in the source file
 *                       where the assertion check failed, may be zero. */
typedef void MDBX_assert_func(const MDBX_env *env, const char *msg,
                              const char *function,
                              unsigned line) MDBX_CXX17_NOEXCEPT;

/** \brief Set or reset the assert() callback of the environment.
 *
 * Does nothing if libmdbx was built with MDBX_DEBUG=0 or with NDEBUG,
 * and will return `MDBX_ENOSYS` in such case.
 *
 * \param [in] env   An environment handle returned by mdbx_env_create().
 * \param [in] func  An MDBX_assert_func function, or 0.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_assert(MDBX_env *env, MDBX_assert_func *func);

/** \brief Dump given MDBX_val to the buffer
 *
 * Dumps it as string if value is printable (all bytes in the range 0x20..0x7E),
 * otherwise made hexadecimal dump. Requires at least 4 byte length buffer.
 *
 * \returns One of:
 *  - NULL if given buffer size less than 4 bytes;
 *  - pointer to constant string if given value NULL or empty;
 *  - otherwise pointer to given buffer. */
LIBMDBX_API const char *mdbx_dump_val(const MDBX_val *key, char *const buf,
                                      const size_t bufsize);

/** \brief Panics with message and causes abnormal process termination. */
MDBX_NORETURN LIBMDBX_API void mdbx_panic(const char *fmt, ...)
    MDBX_PRINTF_ARGS(1, 2);

/** \brief Panics with asserton failed message and causes abnormal process
 * termination. */
MDBX_NORETURN LIBMDBX_API void mdbx_assert_fail(const MDBX_env *env,
                                                const char *msg,
                                                const char *func,
                                                unsigned line);
/** end of c_debug @} */

/** \brief Environment flags
 * \ingroup c_opening
 * \anchor env_flags
 * \see mdbx_env_open() \see mdbx_env_set_flags() */
typedef enum MDBX_env_flags {
  MDBX_ENV_DEFAULTS = 0,

  /** Extra validation of DB structure and pages content.
   *
   * The `MDBX_VALIDATION` enabled the simple safe/careful mode for working
   * with damaged or untrusted DB. However, a notable performance
   * degradation should be expected. */
  MDBX_VALIDATION = UINT32_C(0x00002000),

  /** No environment directory.
   *
   * By default, MDBX creates its environment in a directory whose pathname is
   * given in path, and creates its data and lock files under that directory.
   * With this option, path is used as-is for the database main data file.
   * The database lock file is the path with "-lck" appended.
   *
   * - with `MDBX_NOSUBDIR` = in a filesystem we have the pair of MDBX-files
   *   which names derived from given pathname by appending predefined suffixes.
   *
   * - without `MDBX_NOSUBDIR` = in a filesystem we have the MDBX-directory with
   *   given pathname, within that a pair of MDBX-files with predefined names.
   *
   * This flag affects only at new environment creating by \ref mdbx_env_open(),
   * otherwise at opening an existing environment libmdbx will choice this
   * automatically. */
  MDBX_NOSUBDIR = UINT32_C(0x4000),

  /** Read only mode.
   *
   * Open the environment in read-only mode. No write operations will be
   * allowed. MDBX will still modify the lock file - except on read-only
   * filesystems, where MDBX does not use locks.
   *
   * - with `MDBX_RDONLY` = open environment in read-only mode.
   *   MDBX supports pure read-only mode (i.e. without opening LCK-file) only
   *   when environment directory and/or both files are not writable (and the
   *   LCK-file may be missing). In such case allowing file(s) to be placed
   *   on a network read-only share.
   *
   * - without `MDBX_RDONLY` = open environment in read-write mode.
   *
   * This flag affects only at environment opening but can't be changed after.
   */
  MDBX_RDONLY = UINT32_C(0x20000),

  /** Open environment in exclusive/monopolistic mode.
   *
   * `MDBX_EXCLUSIVE` flag can be used as a replacement for `MDB_NOLOCK`,
   * which don't supported by MDBX.
   * In this way, you can get the minimal overhead, but with the correct
   * multi-process and multi-thread locking.
   *
   * - with `MDBX_EXCLUSIVE` = open environment in exclusive/monopolistic mode
   *   or return \ref MDBX_BUSY if environment already used by other process.
   *   The main feature of the exclusive mode is the ability to open the
   *   environment placed on a network share.
   *
   * - without `MDBX_EXCLUSIVE` = open environment in cooperative mode,
   *   i.e. for multi-process access/interaction/cooperation.
   *   The main requirements of the cooperative mode are:
   *
   *   1. data files MUST be placed in the LOCAL file system,
   *      but NOT on a network share.
   *   2. environment MUST be opened only by LOCAL processes,
   *      but NOT over a network.
   *   3. OS kernel (i.e. file system and memory mapping implementation) and
   *      all processes that open the given environment MUST be running
   *      in the physically single RAM with cache-coherency. The only
   *      exception for cache-consistency requirement is Linux on MIPS
   *      architecture, but this case has not been tested for a long time).
   *
   * This flag affects only at environment opening but can't be changed after.
   */
  MDBX_EXCLUSIVE = UINT32_C(0x400000),

  /** Using database/environment which already opened by another process(es).
   *
   * The `MDBX_ACCEDE` flag is useful to avoid \ref MDBX_INCOMPATIBLE error
   * while opening the database/environment which is already used by another
   * process(es) with unknown mode/flags. In such cases, if there is a
   * difference in the specified flags (\ref MDBX_NOMETASYNC,
   * \ref MDBX_SAFE_NOSYNC, \ref MDBX_UTTERLY_NOSYNC, \ref MDBX_LIFORECLAIM
   * and \ref MDBX_NORDAHEAD), instead of returning an error,
   * the database will be opened in a compatibility with the already used mode.
   *
   * `MDBX_ACCEDE` has no effect if the current process is the only one either
   * opening the DB in read-only mode or other process(es) uses the DB in
   * read-only mode. */
  MDBX_ACCEDE = UINT32_C(0x40000000),

  /** Map data into memory with write permission.
   *
   * Use a writeable memory map unless \ref MDBX_RDONLY is set. This uses fewer
   * mallocs and requires much less work for tracking database pages, but
   * loses protection from application bugs like wild pointer writes and other
   * bad updates into the database. This may be slightly faster for DBs that
   * fit entirely in RAM, but is slower for DBs larger than RAM. Also adds the
   * possibility for stray application writes thru pointers to silently
   * corrupt the database.
   *
   * - with `MDBX_WRITEMAP` = all data will be mapped into memory in the
   *   read-write mode. This offers a significant performance benefit, since the
   *   data will be modified directly in mapped memory and then flushed to disk
   *   by single system call, without any memory management nor copying.
   *
   * - without `MDBX_WRITEMAP` = data will be mapped into memory in the
   *   read-only mode. This requires stocking all modified database pages in
   *   memory and then writing them to disk through file operations.
   *
   * \warning On the other hand, `MDBX_WRITEMAP` adds the possibility for stray
   * application writes thru pointers to silently corrupt the database.
   *
   * \note The `MDBX_WRITEMAP` mode is incompatible with nested transactions,
   * since this is unreasonable. I.e. nested transactions requires mallocation
   * of database pages and more work for tracking ones, which neuters a
   * performance boost caused by the `MDBX_WRITEMAP` mode.
   *
   * This flag affects only at environment opening but can't be changed after.
   */
  MDBX_WRITEMAP = UINT32_C(0x80000),

  /** Отвязывает транзакции от потоков/threads насколько это возможно.
   *
   * Опция предназначена для приложений, которые мультиплексируют множество
   * пользовательских легковесных потоков выполнения по отдельным потокам
   * операционной системы, например как это происходит в средах выполнения
   * GoLang и Rust. Таким приложениям также рекомендуется сериализовать
   * транзакции записи в одном потоке операционной системы, поскольку блокировка
   * записи MDBX использует базовые системные примитивы синхронизации и ничего
   * не знает о пользовательских потоках и/или легковесных потоков среды
   * выполнения. Как минимум, обязательно требуется обеспечить завершение каждой
   * пишущей транзакции строго в том же потоке операционной системы где она была
   * запущена.
   *
   * \note Начиная с версии v0.13 опция `MDBX_NOSTICKYTHREADS` полностью
   * заменяет опцию \ref MDBX_NOTLS.
   *
   * При использовании `MDBX_NOSTICKYTHREADS` транзакции становятся не
   * ассоциированными с создавшими их потоками выполнения. Поэтому в функциях
   * API не выполняется проверка соответствия транзакции и текущего потока
   * выполнения. Большинство функций работающих с транзакциями и курсорами
   * становится возможным вызывать из любых потоков выполнения. Однако, также
   * становится невозможно обнаружить ошибки одновременного использования
   * транзакций и/или курсоров в разных потоках.
   *
   * Использование `MDBX_NOSTICKYTHREADS` также сужает возможности по изменению
   * размера БД, так как теряется возможность отслеживать работающие с БД потоки
   * выполнения и приостанавливать их на время снятия отображения БД в ОЗУ. В
   * частности, по этой причине на Windows уменьшение файла БД не возможно до
   * закрытия БД последним работающим с ней процессом или до последующего
   * открытия БД в режиме чтения-записи.
   *
   * \warning Вне зависимости от \ref MDBX_NOSTICKYTHREADS и \ref MDBX_NOTLS не
   * допускается одновременно использование объектов API из разных потоков
   * выполнения! Обеспечение всех мер для исключения одновременного
   * использования объектов API из разных потоков выполнения целиком ложится на
   * вас!
   *
   * \warning Транзакции записи могут быть завершены только в том же потоке
   * выполнения где они были запущены. Это ограничение следует из требований
   * большинства операционных систем о том, что захваченный примитив
   * синхронизации (мьютекс, семафор, критическая секция) должен освобождаться
   * только захватившим его потоком выполнения.
   *
   * \warning Создание курсора в контексте транзакции, привязка курсора к
   * транзакции, отвязка курсора от транзакции и закрытие привязанного к
   * транзакции курсора, являются операциями использующими как сам курсор так и
   * соответствующую транзакцию. Аналогично, завершение или прерывание
   * транзакции является операцией использующей как саму транзакцию, так и все
   * привязанные к ней курсоры. Во избежание повреждения внутренних структур
   * данных, непредсказуемого поведения, разрушение БД и потери данных следует
   * не допускать возможности одновременного использования каких-либо курсора
   * или транзакций из разных потоков выполнения.
   *
   * Читающие транзакции при использовании `MDBX_NOSTICKYTHREADS` перестают
   * использовать TLS (Thread Local Storage), а слоты блокировок MVCC-снимков в
   * таблице читателей привязываются только к транзакциям. Завершение каких-либо
   * потоков не приводит к снятию блокировок MVCC-снимков до явного завершения
   * транзакций, либо до завершения соответствующего процесса в целом.
   *
   * Для пишущих транзакций не выполняется проверка соответствия текущего потока
   * выполнения и потока создавшего транзакцию. Однако, фиксация или прерывание
   * пишущих транзакций должны выполняться строго в потоке запустившим
   * транзакцию, так как эти операции связаны с захватом и освобождением
   * примитивов синхронизации (мьютексов, критических секций), для которых
   * большинство операционных систем требует освобождение только потоком
   * захватившим ресурс.
   *
   * Этот флаг вступает в силу при открытии среды и не может быть изменен после.
   */
  MDBX_NOSTICKYTHREADS = UINT32_C(0x200000),

  /** \deprecated Please use \ref MDBX_NOSTICKYTHREADS instead. */
  MDBX_NOTLS MDBX_DEPRECATED_ENUM = MDBX_NOSTICKYTHREADS,

  /** Don't do readahead.
   *
   * Turn off readahead. Most operating systems perform readahead on read
   * requests by default. This option turns it off if the OS supports it.
   * Turning it off may help random read performance when the DB is larger
   * than RAM and system RAM is full.
   *
   * By default libmdbx dynamically enables/disables readahead depending on
   * the actual database size and currently available memory. On the other
   * hand, such automation has some limitation, i.e. could be performed only
   * when DB size changing but can't tracks and reacts changing a free RAM
   * availability, since it changes independently and asynchronously.
   *
   * \note The mdbx_is_readahead_reasonable() function allows to quickly find
   * out whether to use readahead or not based on the size of the data and the
   * amount of available memory.
   *
   * This flag affects only at environment opening and can't be changed after.
   */
  MDBX_NORDAHEAD = UINT32_C(0x800000),

  /** Don't initialize malloc'ed memory before writing to datafile.
   *
   * Don't initialize malloc'ed memory before writing to unused spaces in the
   * data file. By default, memory for pages written to the data file is
   * obtained using malloc. While these pages may be reused in subsequent
   * transactions, freshly malloc'ed pages will be initialized to zeroes before
   * use. This avoids persisting leftover data from other code (that used the
   * heap and subsequently freed the memory) into the data file.
   *
   * Note that many other system libraries may allocate and free memory from
   * the heap for arbitrary uses. E.g., stdio may use the heap for file I/O
   * buffers. This initialization step has a modest performance cost so some
   * applications may want to disable it using this flag. This option can be a
   * problem for applications which handle sensitive data like passwords, and
   * it makes memory checkers like Valgrind noisy. This flag is not needed
   * with \ref MDBX_WRITEMAP, which writes directly to the mmap instead of using
   * malloc for pages. The initialization is also skipped if \ref MDBX_RESERVE
   * is used; the caller is expected to overwrite all of the memory that was
   * reserved in that case.
   *
   * This flag may be changed at any time using `mdbx_env_set_flags()`. */
  MDBX_NOMEMINIT = UINT32_C(0x1000000),

  /** Aims to coalesce a Garbage Collection items.
   * \deprecated Always enabled since v0.12 and deprecated since v0.13.
   *
   * With `MDBX_COALESCE` flag MDBX will aims to coalesce items while recycling
   * a Garbage Collection. Technically, when possible short lists of pages
   * will be combined into longer ones, but to fit on one database page. As a
   * result, there will be fewer items in Garbage Collection and a page lists
   * are longer, which slightly increases the likelihood of returning pages to
   * Unallocated space and reducing the database file.
   *
   * This flag may be changed at any time using mdbx_env_set_flags(). */
  MDBX_COALESCE MDBX_DEPRECATED_ENUM = UINT32_C(0x2000000),

  /** LIFO policy for recycling a Garbage Collection items.
   *
   * `MDBX_LIFORECLAIM` flag turns on LIFO policy for recycling a Garbage
   * Collection items, instead of FIFO by default. On systems with a disk
   * write-back cache, this can significantly increase write performance, up
   * to several times in a best case scenario.
   *
   * LIFO recycling policy means that for reuse pages will be taken which became
   * unused the lastest (i.e. just now or most recently). Therefore the loop of
   * database pages circulation becomes as short as possible. In other words,
   * the number of pages, that are overwritten in memory and on disk during a
   * series of write transactions, will be as small as possible. Thus creates
   * ideal conditions for the efficient operation of the disk write-back cache.
   *
   * \ref MDBX_LIFORECLAIM is compatible with all no-sync flags, but gives NO
   * noticeable impact in combination with \ref MDBX_SAFE_NOSYNC or
   * \ref MDBX_UTTERLY_NOSYNC. Because MDBX will reused pages only before the
   * last "steady" MVCC-snapshot, i.e. the loop length of database pages
   * circulation will be mostly defined by frequency of calling
   * \ref mdbx_env_sync() rather than LIFO and FIFO difference.
   *
   * This flag may be changed at any time using mdbx_env_set_flags(). */
  MDBX_LIFORECLAIM = UINT32_C(0x4000000),

  /** Debugging option, fill/perturb released pages. */
  MDBX_PAGEPERTURB = UINT32_C(0x8000000),

  /* SYNC MODES****************************************************************/
  /** \defgroup sync_modes SYNC MODES
   *
   * \attention Using any combination of \ref MDBX_SAFE_NOSYNC, \ref
   * MDBX_NOMETASYNC and especially \ref MDBX_UTTERLY_NOSYNC is always a deal to
   * reduce durability for gain write performance. You must know exactly what
   * you are doing and what risks you are taking!
   *
   * \note for LMDB users: \ref MDBX_SAFE_NOSYNC is NOT similar to LMDB_NOSYNC,
   * but \ref MDBX_UTTERLY_NOSYNC is exactly match LMDB_NOSYNC. See details
   * below.
   *
   * THE SCENE:
   * - The DAT-file contains several MVCC-snapshots of B-tree at same time,
   *   each of those B-tree has its own root page.
   * - Each of meta pages at the beginning of the DAT file contains a
   *   pointer to the root page of B-tree which is the result of the particular
   *   transaction, and a number of this transaction.
   * - For data durability, MDBX must first write all MVCC-snapshot data
   *   pages and ensure that are written to the disk, then update a meta page
   *   with the new transaction number and a pointer to the corresponding new
   *   root page, and flush any buffers yet again.
   * - Thus during commit a I/O buffers should be flushed to the disk twice;
   *   i.e. fdatasync(), FlushFileBuffers() or similar syscall should be
   *   called twice for each commit. This is very expensive for performance,
   *   but guaranteed durability even on unexpected system failure or power
   *   outage. Of course, provided that the operating system and the
   *   underlying hardware (e.g. disk) work correctly.
   *
   * TRADE-OFF:
   * By skipping some stages described above, you can significantly benefit in
   * speed, while partially or completely losing in the guarantee of data
   * durability and/or consistency in the event of system or power failure.
   * Moreover, if for any reason disk write order is not preserved, then at
   * moment of a system crash, a meta-page with a pointer to the new B-tree may
   * be written to disk, while the itself B-tree not yet. In that case, the
   * database will be corrupted!
   *
   * \see MDBX_SYNC_DURABLE \see MDBX_NOMETASYNC \see MDBX_SAFE_NOSYNC
   * \see MDBX_UTTERLY_NOSYNC
   *
   * @{ */

  /** Default robust and durable sync mode.
   *
   * Metadata is written and flushed to disk after a data is written and
   * flushed, which guarantees the integrity of the database in the event
   * of a crash at any time.
   *
   * \attention Please do not use other modes until you have studied all the
   * details and are sure. Otherwise, you may lose your users' data, as happens
   * in [Miranda NG](https://www.miranda-ng.org/) messenger. */
  MDBX_SYNC_DURABLE = 0,

  /** Don't sync the meta-page after commit.
   *
   * Flush system buffers to disk only once per transaction commit, omit the
   * metadata flush. Defer that until the system flushes files to disk,
   * or next non-\ref MDBX_RDONLY commit or \ref mdbx_env_sync(). Depending on
   * the platform and hardware, with \ref MDBX_NOMETASYNC you may get a doubling
   * of write performance.
   *
   * This trade-off maintains database integrity, but a system crash may
   * undo the last committed transaction. I.e. it preserves the ACI
   * (atomicity, consistency, isolation) but not D (durability) database
   * property.
   *
   * `MDBX_NOMETASYNC` flag may be changed at any time using
   * \ref mdbx_env_set_flags() or by passing to \ref mdbx_txn_begin() for
   * particular write transaction. \see sync_modes */
  MDBX_NOMETASYNC = UINT32_C(0x40000),

  /** Don't sync anything but keep previous steady commits.
   *
   * Like \ref MDBX_UTTERLY_NOSYNC the `MDBX_SAFE_NOSYNC` flag disable similarly
   * flush system buffers to disk when committing a transaction. But there is a
   * huge difference in how are recycled the MVCC snapshots corresponding to
   * previous "steady" transactions (see below).
   *
   * With \ref MDBX_WRITEMAP the `MDBX_SAFE_NOSYNC` instructs MDBX to use
   * asynchronous mmap-flushes to disk. Asynchronous mmap-flushes means that
   * actually all writes will scheduled and performed by operation system on it
   * own manner, i.e. unordered. MDBX itself just notify operating system that
   * it would be nice to write data to disk, but no more.
   *
   * Depending on the platform and hardware, with `MDBX_SAFE_NOSYNC` you may get
   * a multiple increase of write performance, even 10 times or more.
   *
   * In contrast to \ref MDBX_UTTERLY_NOSYNC mode, with `MDBX_SAFE_NOSYNC` flag
   * MDBX will keeps untouched pages within B-tree of the last transaction
   * "steady" which was synced to disk completely. This has big implications for
   * both data durability and (unfortunately) performance:
   *  - a system crash can't corrupt the database, but you will lose the last
   *    transactions; because MDBX will rollback to last steady commit since it
   *    kept explicitly.
   *  - the last steady transaction makes an effect similar to "long-lived" read
   *    transaction (see above in the \ref restrictions section) since prevents
   *    reuse of pages freed by newer write transactions, thus the any data
   *    changes will be placed in newly allocated pages.
   *  - to avoid rapid database growth, the system will sync data and issue
   *    a steady commit-point to resume reuse pages, each time there is
   *    insufficient space and before increasing the size of the file on disk.
   *
   * In other words, with `MDBX_SAFE_NOSYNC` flag MDBX insures you from the
   * whole database corruption, at the cost increasing database size and/or
   * number of disk IOPs. So, `MDBX_SAFE_NOSYNC` flag could be used with
   * \ref mdbx_env_sync() as alternatively for batch committing or nested
   * transaction (in some cases). As well, auto-sync feature exposed by
   * \ref mdbx_env_set_syncbytes() and \ref mdbx_env_set_syncperiod() functions
   * could be very useful with `MDBX_SAFE_NOSYNC` flag.
   *
   * The number and volume of of disk IOPs with MDBX_SAFE_NOSYNC flag will
   * exactly the as without any no-sync flags. However, you should expect a
   * larger process's [work set](https://bit.ly/2kA2tFX) and significantly worse
   * a [locality of reference](https://bit.ly/2mbYq2J), due to the more
   * intensive allocation of previously unused pages and increase the size of
   * the database.
   *
   * `MDBX_SAFE_NOSYNC` flag may be changed at any time using
   * \ref mdbx_env_set_flags() or by passing to \ref mdbx_txn_begin() for
   * particular write transaction. */
  MDBX_SAFE_NOSYNC = UINT32_C(0x10000),

  /** \deprecated Please use \ref MDBX_SAFE_NOSYNC instead of `MDBX_MAPASYNC`.
   *
   * Since version 0.9.x the `MDBX_MAPASYNC` is deprecated and has the same
   * effect as \ref MDBX_SAFE_NOSYNC with \ref MDBX_WRITEMAP. This just API
   * simplification is for convenience and clarity. */
  MDBX_MAPASYNC = MDBX_SAFE_NOSYNC,

  /** Don't sync anything and wipe previous steady commits.
   *
   * Don't flush system buffers to disk when committing a transaction. This
   * optimization means a system crash can corrupt the database, if buffers are
   * not yet flushed to disk. Depending on the platform and hardware, with
   * `MDBX_UTTERLY_NOSYNC` you may get a multiple increase of write performance,
   * even 100 times or more.
   *
   * If the filesystem preserves write order (which is rare and never provided
   * unless explicitly noted) and the \ref MDBX_WRITEMAP and \ref
   * MDBX_LIFORECLAIM flags are not used, then a system crash can't corrupt the
   * database, but you can lose the last transactions, if at least one buffer is
   * not yet flushed to disk. The risk is governed by how often the system
   * flushes dirty buffers to disk and how often \ref mdbx_env_sync() is called.
   * So, transactions exhibit ACI (atomicity, consistency, isolation) properties
   * and only lose `D` (durability). I.e. database integrity is maintained, but
   * a system crash may undo the final transactions.
   *
   * Otherwise, if the filesystem not preserves write order (which is
   * typically) or \ref MDBX_WRITEMAP or \ref MDBX_LIFORECLAIM flags are used,
   * you should expect the corrupted database after a system crash.
   *
   * So, most important thing about `MDBX_UTTERLY_NOSYNC`:
   *  - a system crash immediately after commit the write transaction
   *    high likely lead to database corruption.
   *  - successful completion of mdbx_env_sync(force = true) after one or
   *    more committed transactions guarantees consistency and durability.
   *  - BUT by committing two or more transactions you back database into
   *    a weak state, in which a system crash may lead to database corruption!
   *    In case single transaction after mdbx_env_sync, you may lose transaction
   *    itself, but not a whole database.
   *
   * Nevertheless, `MDBX_UTTERLY_NOSYNC` provides "weak" durability in case
   * of an application crash (but no durability on system failure), and
   * therefore may be very useful in scenarios where data durability is
   * not required over a system failure (e.g for short-lived data), or if you
   * can take such risk.
   *
   * `MDBX_UTTERLY_NOSYNC` flag may be changed at any time using
   * \ref mdbx_env_set_flags(), but don't has effect if passed to
   * \ref mdbx_txn_begin() for particular write transaction. \see sync_modes */
  MDBX_UTTERLY_NOSYNC = MDBX_SAFE_NOSYNC | UINT32_C(0x100000),

  /** end of sync_modes @} */
} MDBX_env_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_env_flags)

/** Transaction flags
 * \ingroup c_transactions
 * \anchor txn_flags
 * \see mdbx_txn_begin() \see mdbx_txn_flags() */
typedef enum MDBX_txn_flags {
  /** Start read-write transaction.
   *
   * Only one write transaction may be active at a time. Writes are fully
   * serialized, which guarantees that writers can never deadlock. */
  MDBX_TXN_READWRITE = 0,

  /** Start read-only transaction.
   *
   * There can be multiple read-only transactions simultaneously that do not
   * block each other and a write transactions. */
  MDBX_TXN_RDONLY = MDBX_RDONLY,

/** Prepare but not start read-only transaction.
 *
 * Transaction will not be started immediately, but created transaction handle
 * will be ready for use with \ref mdbx_txn_renew(). This flag allows to
 * preallocate memory and assign a reader slot, thus avoiding these operations
 * at the next start of the transaction. */
#if CONSTEXPR_ENUM_FLAGS_OPERATIONS || defined(DOXYGEN)
  MDBX_TXN_RDONLY_PREPARE = MDBX_RDONLY | MDBX_NOMEMINIT,
#else
  MDBX_TXN_RDONLY_PREPARE = uint32_t(MDBX_RDONLY) | uint32_t(MDBX_NOMEMINIT),
#endif

  /** Do not block when starting a write transaction. */
  MDBX_TXN_TRY = UINT32_C(0x10000000),

  /** Exactly the same as \ref MDBX_NOMETASYNC,
   * but for this transaction only. */
  MDBX_TXN_NOMETASYNC = MDBX_NOMETASYNC,

  /** Exactly the same as \ref MDBX_SAFE_NOSYNC,
   * but for this transaction only. */
  MDBX_TXN_NOSYNC = MDBX_SAFE_NOSYNC,

  /* Transaction state flags ---------------------------------------------- */

  /** Transaction is invalid.
   * \note Transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_INVALID = INT32_MIN,

  /** Transaction is finished or never began.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_FINISHED = 0x01,

  /** Transaction is unusable after an error.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_ERROR = 0x02,

  /** Transaction must write, even if dirty list is empty.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_DIRTY = 0x04,

  /** Transaction or a parent has spilled pages.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_SPILLS = 0x08,

  /** Transaction has a nested child transaction.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_HAS_CHILD = 0x10,

  /** Transaction is parked by \ref mdbx_txn_park().
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_PARKED = 0x20,

  /** Transaction is parked by \ref mdbx_txn_park() with `autounpark=true`,
   * and therefore it can be used without explicitly calling
   * \ref mdbx_txn_unpark() first.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_AUTOUNPARK = 0x40,

  /** The transaction was blocked using the \ref mdbx_txn_park() function,
   * and then ousted by a write transaction because
   * this transaction was interfered with garbage recycling.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_OUSTED = 0x80,

  /** Most operations on the transaction are currently illegal.
   * \note This is a transaction state flag. Returned from \ref mdbx_txn_flags()
   * but can't be used with \ref mdbx_txn_begin(). */
  MDBX_TXN_BLOCKED =
      MDBX_TXN_FINISHED | MDBX_TXN_ERROR | MDBX_TXN_HAS_CHILD | MDBX_TXN_PARKED
} MDBX_txn_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_txn_flags)

/** \brief Table flags
 * \ingroup c_dbi
 * \anchor db_flags
 * \see mdbx_dbi_open() */
typedef enum MDBX_db_flags {
  /** Variable length unique keys with usual byte-by-byte string comparison. */
  MDBX_DB_DEFAULTS = 0,

  /** Use reverse string comparison for keys. */
  MDBX_REVERSEKEY = UINT32_C(0x02),

  /** Use sorted duplicates, i.e. allow multi-values for a keys. */
  MDBX_DUPSORT = UINT32_C(0x04),

  /** Numeric keys in native byte order either uint32_t or uint64_t
   * (must be one of uint32_t or uint64_t, other integer types, for example,
   * signed integer or uint16_t will not work).
   * The keys must all be of the same size and must be aligned while passing as
   * arguments. */
  MDBX_INTEGERKEY = UINT32_C(0x08),

  /** With \ref MDBX_DUPSORT; sorted dup items have fixed size. The data values
   * must all be of the same size. */
  MDBX_DUPFIXED = UINT32_C(0x10),

  /** With \ref MDBX_DUPSORT and with \ref MDBX_DUPFIXED; dups are fixed size
   * like \ref MDBX_INTEGERKEY -style integers. The data values must all be of
   * the same size and must be aligned while passing as arguments. */
  MDBX_INTEGERDUP = UINT32_C(0x20),

  /** With \ref MDBX_DUPSORT; use reverse string comparison for data values. */
  MDBX_REVERSEDUP = UINT32_C(0x40),

  /** Create DB if not already existing. */
  MDBX_CREATE = UINT32_C(0x40000),

  /** Opens an existing table created with unknown flags.
   *
   * The `MDBX_DB_ACCEDE` flag is intend to open a existing table which
   * was created with unknown flags (\ref MDBX_REVERSEKEY, \ref MDBX_DUPSORT,
   * \ref MDBX_INTEGERKEY, \ref MDBX_DUPFIXED, \ref MDBX_INTEGERDUP and
   * \ref MDBX_REVERSEDUP).
   *
   * In such cases, instead of returning the \ref MDBX_INCOMPATIBLE error, the
   * table will be opened with flags which it was created, and then an
   * application could determine the actual flags by \ref mdbx_dbi_flags(). */
  MDBX_DB_ACCEDE = MDBX_ACCEDE
} MDBX_db_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_db_flags)

/** \brief Data changing flags
 * \ingroup c_crud
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 * \see mdbx_put() \see mdbx_cursor_put() \see mdbx_replace() */
typedef enum MDBX_put_flags {
  /** Upsertion by default (without any other flags) */
  MDBX_UPSERT = 0,

  /** For insertion: Don't write if the key already exists. */
  MDBX_NOOVERWRITE = UINT32_C(0x10),

  /** Has effect only for \ref MDBX_DUPSORT tables.
   * For upsertion: don't write if the key-value pair already exist. */
  MDBX_NODUPDATA = UINT32_C(0x20),

  /** For upsertion: overwrite the current key/data pair.
   * MDBX allows this flag for \ref mdbx_put() for explicit overwrite/update
   * without insertion.
   * For deletion: remove only single entry at the current cursor position. */
  MDBX_CURRENT = UINT32_C(0x40),

  /** Has effect only for \ref MDBX_DUPSORT tables.
   * For deletion: remove all multi-values (aka duplicates) for given key.
   * For upsertion: replace all multi-values for given key with a new one. */
  MDBX_ALLDUPS = UINT32_C(0x80),

  /** For upsertion: Just reserve space for data, don't copy it.
   * Return a pointer to the reserved space. */
  MDBX_RESERVE = UINT32_C(0x10000),

  /** Data is being appended.
   * Don't split full pages, continue on a new instead. */
  MDBX_APPEND = UINT32_C(0x20000),

  /** Has effect only for \ref MDBX_DUPSORT tables.
   * Duplicate data is being appended.
   * Don't split full pages, continue on a new instead. */
  MDBX_APPENDDUP = UINT32_C(0x40000),

  /** Only for \ref MDBX_DUPFIXED.
   * Store multiple data items in one call. */
  MDBX_MULTIPLE = UINT32_C(0x80000)
} MDBX_put_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_put_flags)

/** \brief Environment copy flags
 * \ingroup c_extra
 * \see mdbx_env_copy() \see mdbx_env_copy2fd() */
typedef enum MDBX_copy_flags {
  MDBX_CP_DEFAULTS = 0,

  /** Copy with compactification: Omit free space from copy and renumber all
   * pages sequentially */
  MDBX_CP_COMPACT = 1u,

  /** Force to make resizable copy, i.e. dynamic size instead of fixed */
  MDBX_CP_FORCE_DYNAMIC_SIZE = 2u,

  /** Don't explicitly flush the written data to an output media */
  MDBX_CP_DONT_FLUSH = 4u,

  /** Use read transaction parking during copying MVCC-snapshot
   * \see mdbx_txn_park() */
  MDBX_CP_THROTTLE_MVCC = 8u,

  /** Abort/dispose passed transaction after copy
   * \see mdbx_txn_copy2fd() \see mdbx_txn_copy2pathname() */
  MDBX_CP_DISPOSE_TXN = 16u,

  /** Enable renew/restart read transaction in case it use outdated
   * MVCC shapshot, otherwise the \ref MDBX_MVCC_RETARDED will be returned
   * \see mdbx_txn_copy2fd() \see mdbx_txn_copy2pathname() */
  MDBX_CP_RENEW_TXN = 32u

} MDBX_copy_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_copy_flags)

/** \brief Cursor operations
 * \ingroup c_cursors
 * This is the set of all operations for retrieving data using a cursor.
 * \see mdbx_cursor_get() */
typedef enum MDBX_cursor_op {
  /** Position at first key/data item */
  MDBX_FIRST,

  /** \ref MDBX_DUPSORT -only: Position at first data item of current key. */
  MDBX_FIRST_DUP,

  /** \ref MDBX_DUPSORT -only: Position at key/data pair. */
  MDBX_GET_BOTH,

  /** \ref MDBX_DUPSORT -only: Position at given key and at first data greater
   * than or equal to specified data. */
  MDBX_GET_BOTH_RANGE,

  /** Return key/data at current cursor position */
  MDBX_GET_CURRENT,

  /** \ref MDBX_DUPFIXED -only: Return up to a page of duplicate data items
   * from current cursor position. Move cursor to prepare
   * for \ref MDBX_NEXT_MULTIPLE. */
  MDBX_GET_MULTIPLE,

  /** Position at last key/data item */
  MDBX_LAST,

  /** \ref MDBX_DUPSORT -only: Position at last data item of current key. */
  MDBX_LAST_DUP,

  /** Position at next data item */
  MDBX_NEXT,

  /** \ref MDBX_DUPSORT -only: Position at next data item of current key. */
  MDBX_NEXT_DUP,

  /** \ref MDBX_DUPFIXED -only: Return up to a page of duplicate data items
   * from next cursor position. Move cursor to prepare
   * for `MDBX_NEXT_MULTIPLE`. */
  MDBX_NEXT_MULTIPLE,

  /** Position at first data item of next key */
  MDBX_NEXT_NODUP,

  /** Position at previous data item */
  MDBX_PREV,

  /** \ref MDBX_DUPSORT -only: Position at previous data item of current key. */
  MDBX_PREV_DUP,

  /** Position at last data item of previous key */
  MDBX_PREV_NODUP,

  /** Position at specified key */
  MDBX_SET,

  /** Position at specified key, return both key and data */
  MDBX_SET_KEY,

  /** Position at first key greater than or equal to specified key. */
  MDBX_SET_RANGE,

  /** \ref MDBX_DUPFIXED -only: Position at previous page and return up to
   * a page of duplicate data items. */
  MDBX_PREV_MULTIPLE,

  /** Positions cursor at first key-value pair greater than or equal to
   * specified, return both key and data, and the return code depends on whether
   * a exact match.
   *
   * For non DUPSORT-ed collections this work the same to \ref MDBX_SET_RANGE,
   * but returns \ref MDBX_SUCCESS if key found exactly or
   * \ref MDBX_RESULT_TRUE if greater key was found.
   *
   * For DUPSORT-ed a data value is taken into account for duplicates,
   * i.e. for a pairs/tuples of a key and an each data value of duplicates.
   * Returns \ref MDBX_SUCCESS if key-value pair found exactly or
   * \ref MDBX_RESULT_TRUE if the next pair was returned. */
  MDBX_SET_LOWERBOUND,

  /** Positions cursor at first key-value pair greater than specified,
   * return both key and data, and the return code depends on whether a
   * upper-bound was found.
   *
   * For non DUPSORT-ed collections this work like \ref MDBX_SET_RANGE,
   * but returns \ref MDBX_SUCCESS if the greater key was found or
   * \ref MDBX_NOTFOUND otherwise.
   *
   * For DUPSORT-ed a data value is taken into account for duplicates,
   * i.e. for a pairs/tuples of a key and an each data value of duplicates.
   * Returns \ref MDBX_SUCCESS if the greater pair was returned or
   * \ref MDBX_NOTFOUND otherwise. */
  MDBX_SET_UPPERBOUND,

  /* Doubtless cursor positioning at a specified key. */
  MDBX_TO_KEY_LESSER_THAN,
  MDBX_TO_KEY_LESSER_OR_EQUAL,
  MDBX_TO_KEY_EQUAL,
  MDBX_TO_KEY_GREATER_OR_EQUAL,
  MDBX_TO_KEY_GREATER_THAN,

  /* Doubtless cursor positioning at a specified key-value pair
   * for dupsort/multi-value hives. */
  MDBX_TO_EXACT_KEY_VALUE_LESSER_THAN,
  MDBX_TO_EXACT_KEY_VALUE_LESSER_OR_EQUAL,
  MDBX_TO_EXACT_KEY_VALUE_EQUAL,
  MDBX_TO_EXACT_KEY_VALUE_GREATER_OR_EQUAL,
  MDBX_TO_EXACT_KEY_VALUE_GREATER_THAN,

  MDBX_TO_PAIR_LESSER_THAN,
  MDBX_TO_PAIR_LESSER_OR_EQUAL,
  MDBX_TO_PAIR_EQUAL,
  MDBX_TO_PAIR_GREATER_OR_EQUAL,
  MDBX_TO_PAIR_GREATER_THAN
} MDBX_cursor_op;

/** \brief Errors and return codes
 * \ingroup c_err
 *
 * BerkeleyDB uses -30800 to -30999, we'll go under them
 * \see mdbx_strerror() \see mdbx_strerror_r() \see mdbx_liberr2str() */
typedef enum MDBX_error {
  /** Successful result */
  MDBX_SUCCESS = 0,

  /** Alias for \ref MDBX_SUCCESS */
  MDBX_RESULT_FALSE = MDBX_SUCCESS,

  /** Successful result with special meaning or a flag */
  MDBX_RESULT_TRUE = -1,

  /** key/data pair already exists */
  MDBX_KEYEXIST = -30799,

  /** The first LMDB-compatible defined error code */
  MDBX_FIRST_LMDB_ERRCODE = MDBX_KEYEXIST,

  /** key/data pair not found (EOF) */
  MDBX_NOTFOUND = -30798,

  /** Requested page not found - this usually indicates corruption */
  MDBX_PAGE_NOTFOUND = -30797,

  /** Database is corrupted (page was wrong type and so on) */
  MDBX_CORRUPTED = -30796,

  /** Environment had fatal error,
   * i.e. update of meta page failed and so on. */
  MDBX_PANIC = -30795,

  /** DB file version mismatch with libmdbx */
  MDBX_VERSION_MISMATCH = -30794,

  /** File is not a valid MDBX file */
  MDBX_INVALID = -30793,

  /** Environment mapsize reached */
  MDBX_MAP_FULL = -30792,

  /** Environment maxdbs reached */
  MDBX_DBS_FULL = -30791,

  /** Environment maxreaders reached */
  MDBX_READERS_FULL = -30790,

  /** Transaction has too many dirty pages, i.e transaction too big */
  MDBX_TXN_FULL = -30788,

  /** Cursor stack too deep - this usually indicates corruption,
   * i.e branch-pages loop */
  MDBX_CURSOR_FULL = -30787,

  /** Page has not enough space - internal error */
  MDBX_PAGE_FULL = -30786,

  /** Database engine was unable to extend mapping, e.g. since address space
   * is unavailable or busy. This can mean:
   *  - Database size extended by other process beyond to environment mapsize
   *    and engine was unable to extend mapping while starting read
   *    transaction. Environment should be reopened to continue.
   *  - Engine was unable to extend mapping during write transaction
   *    or explicit call of \ref mdbx_env_set_geometry(). */
  MDBX_UNABLE_EXTEND_MAPSIZE = -30785,

  /** Environment or table is not compatible with the requested operation
   * or the specified flags. This can mean:
   *  - The operation expects an \ref MDBX_DUPSORT / \ref MDBX_DUPFIXED
   *    table.
   *  - Opening a named DB when the unnamed DB has \ref MDBX_DUPSORT /
   *    \ref MDBX_INTEGERKEY.
   *  - Accessing a data record as a named table, or vice versa.
   *  - The table was dropped and recreated with different flags. */
  MDBX_INCOMPATIBLE = -30784,

  /** Invalid reuse of reader locktable slot,
   * e.g. read-transaction already run for current thread */
  MDBX_BAD_RSLOT = -30783,

  /** Transaction is not valid for requested operation,
   * e.g. had errored and be must aborted, has a child/nested transaction,
   * or is invalid */
  MDBX_BAD_TXN = -30782,

  /** Invalid size or alignment of key or data for target table,
   * either invalid table name */
  MDBX_BAD_VALSIZE = -30781,

  /** The specified DBI-handle is invalid
   * or changed by another thread/transaction */
  MDBX_BAD_DBI = -30780,

  /** Unexpected internal error, transaction should be aborted */
  MDBX_PROBLEM = -30779,

  /** The last LMDB-compatible defined error code */
  MDBX_LAST_LMDB_ERRCODE = MDBX_PROBLEM,

  /** Another write transaction is running or environment is already used while
   * opening with \ref MDBX_EXCLUSIVE flag */
  MDBX_BUSY = -30778,

  /** The first of MDBX-added error codes */
  MDBX_FIRST_ADDED_ERRCODE = MDBX_BUSY,

  /** The specified key has more than one associated value */
  MDBX_EMULTIVAL = -30421,

  /** Bad signature of a runtime object(s), this can mean:
   *  - memory corruption or double-free;
   *  - ABI version mismatch (rare case); */
  MDBX_EBADSIGN = -30420,

  /** Database should be recovered, but this could NOT be done for now
   * since it opened in read-only mode */
  MDBX_WANNA_RECOVERY = -30419,

  /** The given key value is mismatched to the current cursor position */
  MDBX_EKEYMISMATCH = -30418,

  /** Database is too large for current system,
   * e.g. could NOT be mapped into RAM. */
  MDBX_TOO_LARGE = -30417,

  /** A thread has attempted to use a not owned object,
   * e.g. a transaction that started by another thread */
  MDBX_THREAD_MISMATCH = -30416,

  /** Overlapping read and write transactions for the current thread */
  MDBX_TXN_OVERLAPPING = -30415,

  /** Внутренняя ошибка возвращаемая в случае нехватки запаса свободных страниц
   * при обновлении GC. Используется как вспомогательное средство для отладки.
   * \note С точки зрения пользователя семантически
   *       равнозначна \ref MDBX_PROBLEM. */
  MDBX_BACKLOG_DEPLETED = -30414,

  /** Alternative/Duplicate LCK-file is exists and should be removed manually */
  MDBX_DUPLICATED_CLK = -30413,

  /** Some cursors and/or other resources should be closed before table or
   *  corresponding DBI-handle could be (re)used and/or closed. */
  MDBX_DANGLING_DBI = -30412,

  /** The parked read transaction was outed for the sake of
   * recycling old MVCC snapshots. */
  MDBX_OUSTED = -30411,

  /** MVCC snapshot used by read transaction is outdated and could not be
   *  copied since corresponding meta-pages was overwritten. */
  MDBX_MVCC_RETARDED = -30410,

  /* The last of MDBX-added error codes */
  MDBX_LAST_ADDED_ERRCODE = MDBX_MVCC_RETARDED,

#if defined(_WIN32) || defined(_WIN64)
  MDBX_ENODATA = ERROR_HANDLE_EOF,
  MDBX_EINVAL = ERROR_INVALID_PARAMETER,
  MDBX_EACCESS = ERROR_ACCESS_DENIED,
  MDBX_ENOMEM = ERROR_OUTOFMEMORY,
  MDBX_EROFS = ERROR_FILE_READ_ONLY,
  MDBX_ENOSYS = ERROR_NOT_SUPPORTED,
  MDBX_EIO = ERROR_WRITE_FAULT,
  MDBX_EPERM = ERROR_INVALID_FUNCTION,
  MDBX_EINTR = ERROR_CANCELLED,
  MDBX_ENOFILE = ERROR_FILE_NOT_FOUND,
  MDBX_EREMOTE = ERROR_REMOTE_STORAGE_MEDIA_ERROR,
  MDBX_EDEADLK = ERROR_POSSIBLE_DEADLOCK
#else /* Windows */
#ifdef ENODATA
  MDBX_ENODATA = ENODATA,
#else
  MDBX_ENODATA = 9919 /* for compatibility with LLVM's C++ libraries/headers */,
#endif /* ENODATA */
  MDBX_EINVAL = EINVAL,
  MDBX_EACCESS = EACCES,
  MDBX_ENOMEM = ENOMEM,
  MDBX_EROFS = EROFS,
  MDBX_ENOSYS = ENOSYS,
  MDBX_EIO = EIO,
  MDBX_EPERM = EPERM,
  MDBX_EINTR = EINTR,
  MDBX_ENOFILE = ENOENT,
  MDBX_EREMOTE = ENOTBLK,
  MDBX_EDEADLK = EDEADLK
#endif /* !Windows */
} MDBX_error_t;

/** MDBX_MAP_RESIZED
 * \ingroup c_err
 * \deprecated Please review your code to use MDBX_UNABLE_EXTEND_MAPSIZE
 * instead. */
MDBX_DEPRECATED static __inline int MDBX_MAP_RESIZED_is_deprecated(void) {
  return MDBX_UNABLE_EXTEND_MAPSIZE;
}
#define MDBX_MAP_RESIZED MDBX_MAP_RESIZED_is_deprecated()

/** \brief Return a string describing a given error code.
 * \ingroup c_err
 *
 * This function is a superset of the ANSI C X3.159-1989 (ANSI C) `strerror()`
 * function. If the error code is greater than or equal to 0, then the string
 * returned by the system function `strerror()` is returned. If the error code
 * is less than 0, an error string corresponding to the MDBX library error is
 * returned. See errors for a list of MDBX-specific error codes.
 *
 * `mdbx_strerror()` is NOT thread-safe because may share common internal buffer
 * for system messages. The returned string must NOT be modified by the
 * application, but MAY be modified by a subsequent call to
 * \ref mdbx_strerror(), `strerror()` and other related functions.
 * \see mdbx_strerror_r()
 *
 * \param [in] errnum  The error code.
 *
 * \returns "error message" The description of the error. */
LIBMDBX_API const char *mdbx_strerror(int errnum);

/** \brief Return a string describing a given error code.
 * \ingroup c_err
 *
 * This function is a superset of the ANSI C X3.159-1989 (ANSI C) `strerror()`
 * function. If the error code is greater than or equal to 0, then the string
 * returned by the system function `strerror()` is returned. If the error code
 * is less than 0, an error string corresponding to the MDBX library error is
 * returned. See errors for a list of MDBX-specific error codes.
 *
 * `mdbx_strerror_r()` is thread-safe since uses user-supplied buffer where
 * appropriate. The returned string must NOT be modified by the application,
 * since it may be pointer to internal constant string. However, there is no
 * restriction if the returned string points to the supplied buffer.
 * \see mdbx_strerror()
 *
 * mdbx_liberr2str() returns string describing only MDBX error numbers but NULL
 * for non-MDBX error codes. This function is thread-safe since return pointer
 * to constant non-localized strings.
 *
 * \param [in] errnum  The error code.
 * \param [in,out] buf Buffer to store the error message.
 * \param [in] buflen The size of buffer to store the message.
 *
 * \returns "error message" The description of the error. */
LIBMDBX_API const char *mdbx_strerror_r(int errnum, char *buf, size_t buflen);
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API const char *mdbx_liberr2str(int errnum);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** Bit of Windows' madness. The similar to \ref mdbx_strerror() but returns
 * Windows error-messages in the OEM-encoding for console utilities.
 * \ingroup c_err
 * \see mdbx_strerror_r_ANSI2OEM() */
LIBMDBX_API const char *mdbx_strerror_ANSI2OEM(int errnum);

/** Bit of Windows' madness. The similar to \ref mdbx_strerror_r() but returns
 * Windows error-messages in the OEM-encoding for console utilities.
 * \ingroup c_err
 * \see mdbx_strerror_ANSI2OEM() */
LIBMDBX_API const char *mdbx_strerror_r_ANSI2OEM(int errnum, char *buf,
                                                 size_t buflen);
#endif /* Bit of Windows' madness */

/** \brief Create an MDBX environment instance.
 * \ingroup c_opening
 *
 * This function allocates memory for a \ref MDBX_env structure. To release
 * the allocated memory and discard the handle, call \ref mdbx_env_close().
 * Before the handle may be used, it must be opened using \ref mdbx_env_open().
 *
 * Various other options may also need to be set before opening the handle,
 * e.g. \ref mdbx_env_set_geometry(), \ref mdbx_env_set_maxreaders(),
 * \ref mdbx_env_set_maxdbs(), depending on usage requirements.
 *
 * \param [out] penv  The address where the new handle will be stored.
 *
 * \returns a non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_create(MDBX_env **penv);

/** \brief MDBX environment extra runtime options.
 * \ingroup c_settings
 * \see mdbx_env_set_option() \see mdbx_env_get_option() */
typedef enum MDBX_option {
  /** \brief Controls the maximum number of named tables for the environment.
   *
   * \details By default only unnamed key-value table could used and
   * appropriate value should set by `MDBX_opt_max_db` to using any more named
   * table(s). To reduce overhead, use the minimum sufficient value. This option
   * may only set after \ref mdbx_env_create() and before \ref mdbx_env_open().
   *
   * \see mdbx_env_set_maxdbs() \see mdbx_env_get_maxdbs() */
  MDBX_opt_max_db,

  /** \brief Defines the maximum number of threads/reader slots
   * for all processes interacting with the database.
   *
   * \details This defines the number of slots in the lock table that is used to
   * track readers in the the environment. The default is about 100 for 4K
   * system page size. Starting a read-only transaction normally ties a lock
   * table slot to the current thread until the environment closes or the thread
   * exits. If \ref MDBX_NOSTICKYTHREADS is in use, \ref mdbx_txn_begin()
   * instead ties the slot to the \ref MDBX_txn object until it or the \ref
   * MDBX_env object is destroyed. This option may only set after \ref
   * mdbx_env_create() and before \ref mdbx_env_open(), and has an effect only
   * when the database is opened by the first process interacts with the
   * database.
   *
   * \see mdbx_env_set_maxreaders() \see mdbx_env_get_maxreaders() */
  MDBX_opt_max_readers,

  /** \brief Controls interprocess/shared threshold to force flush the data
   * buffers to disk, if \ref MDBX_SAFE_NOSYNC is used.
   *
   * \see mdbx_env_set_syncbytes() \see mdbx_env_get_syncbytes() */
  MDBX_opt_sync_bytes,

  /** \brief Controls interprocess/shared relative period since the last
   * unsteady commit to force flush the data buffers to disk,
   * if \ref MDBX_SAFE_NOSYNC is used.
   * \see mdbx_env_set_syncperiod() \see mdbx_env_get_syncperiod() */
  MDBX_opt_sync_period,

  /** \brief Controls the in-process limit to grow a list of reclaimed/recycled
   * page's numbers for finding a sequence of contiguous pages for large data
   * items.
   * \see MDBX_opt_gc_time_limit
   *
   * \details A long values requires allocation of contiguous database pages.
   * To find such sequences, it may be necessary to accumulate very large lists,
   * especially when placing very long values (more than a megabyte) in a large
   * databases (several tens of gigabytes), which is much expensive in extreme
   * cases. This threshold allows you to avoid such costs by allocating new
   * pages at the end of the database (with its possible growth on disk),
   * instead of further accumulating/reclaiming Garbage Collection records.
   *
   * On the other hand, too small threshold will lead to unreasonable database
   * growth, or/and to the inability of put long values.
   *
   * The `MDBX_opt_rp_augment_limit` controls described limit for the current
   * process. By default this limit adjusted dynamically to 1/3 of current
   * quantity of DB pages, which is usually enough for most cases. */
  MDBX_opt_rp_augment_limit,

  /** \brief Controls the in-process limit to grow a cache of dirty
   * pages for reuse in the current transaction.
   *
   * \details A 'dirty page' refers to a page that has been updated in memory
   * only, the changes to a dirty page are not yet stored on disk.
   * To reduce overhead, it is reasonable to release not all such pages
   * immediately, but to leave some ones in cache for reuse in the current
   * transaction.
   *
   * The `MDBX_opt_loose_limit` allows you to set a limit for such cache inside
   * the current process. Should be in the range 0..255, default is 64. */
  MDBX_opt_loose_limit,

  /** \brief Controls the in-process limit of a pre-allocated memory items
   * for dirty pages.
   *
   * \details A 'dirty page' refers to a page that has been updated in memory
   * only, the changes to a dirty page are not yet stored on disk.
   * Without \ref MDBX_WRITEMAP dirty pages are allocated from memory and
   * released when a transaction is committed. To reduce overhead, it is
   * reasonable to release not all ones, but to leave some allocations in
   * reserve for reuse in the next transaction(s).
   *
   * The `MDBX_opt_dp_reserve_limit` allows you to set a limit for such reserve
   * inside the current process. Default is 1024. */
  MDBX_opt_dp_reserve_limit,

  /** \brief Controls the in-process limit of dirty pages
   * for a write transaction.
   *
   * \details A 'dirty page' refers to a page that has been updated in memory
   * only, the changes to a dirty page are not yet stored on disk.
   * Without \ref MDBX_WRITEMAP dirty pages are allocated from memory and will
   * be busy until are written to disk. Therefore for a large transactions is
   * reasonable to limit dirty pages collecting above an some threshold but
   * spill to disk instead.
   *
   * The `MDBX_opt_txn_dp_limit` controls described threshold for the current
   * process. Default is 65536, it is usually enough for most cases. */
  MDBX_opt_txn_dp_limit,

  /** \brief Controls the in-process initial allocation size for dirty pages
   * list of a write transaction. Default is 1024. */
  MDBX_opt_txn_dp_initial,

  /** \brief Controls the in-process how maximal part of the dirty pages may be
   * spilled when necessary.
   *
   * \details The `MDBX_opt_spill_max_denominator` defines the denominator for
   * limiting from the top for part of the current dirty pages may be spilled
   * when the free room for a new dirty pages (i.e. distance to the
   * `MDBX_opt_txn_dp_limit` threshold) is not enough to perform requested
   * operation.
   * Exactly `max_pages_to_spill = dirty_pages - dirty_pages / N`,
   * where `N` is the value set by `MDBX_opt_spill_max_denominator`.
   *
   * Should be in the range 0..255, where zero means no limit, i.e. all dirty
   * pages could be spilled. Default is 8, i.e. no more than 7/8 of the current
   * dirty pages may be spilled when reached the condition described above. */
  MDBX_opt_spill_max_denominator,

  /** \brief Controls the in-process how minimal part of the dirty pages should
   * be spilled when necessary.
   *
   * \details The `MDBX_opt_spill_min_denominator` defines the denominator for
   * limiting from the bottom for part of the current dirty pages should be
   * spilled when the free room for a new dirty pages (i.e. distance to the
   * `MDBX_opt_txn_dp_limit` threshold) is not enough to perform requested
   * operation.
   * Exactly `min_pages_to_spill = dirty_pages / N`,
   * where `N` is the value set by `MDBX_opt_spill_min_denominator`.
   *
   * Should be in the range 0..255, where zero means no restriction at the
   * bottom. Default is 8, i.e. at least the 1/8 of the current dirty pages
   * should be spilled when reached the condition described above. */
  MDBX_opt_spill_min_denominator,

  /** \brief Controls the in-process how much of the parent transaction dirty
   * pages will be spilled while start each child transaction.
   *
   * \details The `MDBX_opt_spill_parent4child_denominator` defines the
   * denominator to determine how much of parent transaction dirty pages will be
   * spilled explicitly while start each child transaction.
   * Exactly `pages_to_spill = dirty_pages / N`,
   * where `N` is the value set by `MDBX_opt_spill_parent4child_denominator`.
   *
   * For a stack of nested transactions each dirty page could be spilled only
   * once, and parent's dirty pages couldn't be spilled while child
   * transaction(s) are running. Therefore a child transaction could reach
   * \ref MDBX_TXN_FULL when parent(s) transaction has  spilled too less (and
   * child reach the limit of dirty pages), either when parent(s) has spilled
   * too more (since child can't spill already spilled pages). So there is no
   * universal golden ratio.
   *
   * Should be in the range 0..255, where zero means no explicit spilling will
   * be performed during starting nested transactions.
   * Default is 0, i.e. by default no spilling performed during starting nested
   * transactions, that correspond historically behaviour. */
  MDBX_opt_spill_parent4child_denominator,

  /** \brief Controls the in-process threshold of semi-empty pages merge.
   * \details This option controls the in-process threshold of minimum page
   * fill, as used space of percentage of a page. Neighbour pages emptier than
   * this value are candidates for merging. The threshold value is specified
   * in 1/65536 points of a whole page, which is equivalent to the 16-dot-16
   * fixed point format.
   * The specified value must be in the range from 12.5% (almost empty page)
   * to 50% (half empty page) which corresponds to the range from 8192 and
   * to 32768 in units respectively.
   * \see MDBX_opt_prefer_waf_insteadof_balance */
  MDBX_opt_merge_threshold_16dot16_percent,

  /** \brief Controls the choosing between use write-through disk writes and
   * usual ones with followed flush by the `fdatasync()` syscall.
   * \details Depending on the operating system, storage subsystem
   * characteristics and the use case, higher performance can be achieved by
   * either using write-through or a serie of usual/lazy writes followed by
   * the flush-to-disk.
   *
   * Basically for N chunks the latency/cost of write-through is:
   *  latency = N * (emit + round-trip-to-storage + storage-execution);
   * And for serie of lazy writes with flush is:
   *  latency = N * (emit + storage-execution) + flush + round-trip-to-storage.
   *
   * So, for large N and/or noteable round-trip-to-storage the write+flush
   * approach is win. But for small N and/or near-zero NVMe-like latency
   * the write-through is better.
   *
   * To solve this issue libmdbx provide `MDBX_opt_writethrough_threshold`:
   *  - when N described above less or equal specified threshold,
   *    a write-through approach will be used;
   *  - otherwise, when N great than specified threshold,
   *    a write-and-flush approach will be used.
   *
   * \note MDBX_opt_writethrough_threshold affects only \ref MDBX_SYNC_DURABLE
   * mode without \ref MDBX_WRITEMAP, and not supported on Windows.
   * On Windows a write-through is used always but \ref MDBX_NOMETASYNC could
   * be used for switching to write-and-flush. */
  MDBX_opt_writethrough_threshold,

  /** \brief Controls prevention of page-faults of reclaimed and allocated pages
   * in the \ref MDBX_WRITEMAP mode by clearing ones through file handle before
   * touching. */
  MDBX_opt_prefault_write_enable,

  /** \brief Controls the in-process spending time limit of searching
   *  consecutive pages inside GC.
   * \see MDBX_opt_rp_augment_limit
   *
   * \details Задаёт ограничение времени в 1/65536 долях секунды, которое может
   * быть потрачено в ходе пишущей транзакции на поиск последовательностей
   * страниц внутри GC/freelist после достижения ограничения задаваемого опцией
   * \ref MDBX_opt_rp_augment_limit. Контроль по времени не выполняется при
   * поиске/выделении одиночных страниц и выделении страниц под нужды GC (при
   * обновлении GC в ходе фиксации транзакции).
   *
   * Задаваемый лимит времени исчисляется по "настенным часам" и контролируется
   * в рамках транзакции, наследуется для вложенных транзакций и с
   * аккумулированием в родительской при их фиксации. Контроль по времени
   * производится только при достижении ограничения задаваемого опцией \ref
   * MDBX_opt_rp_augment_limit. Это позволяет гибко управлять поведением
   * используя обе опции.
   *
   * По умолчанию ограничение устанавливается в 0, что приводит к
   * незамедлительной остановке поиска в GC при достижении \ref
   * MDBX_opt_rp_augment_limit во внутреннем состоянии транзакции и
   * соответствует поведению до появления опции `MDBX_opt_gc_time_limit`.
   * С другой стороны, при минимальном значении (включая 0)
   * `MDBX_opt_rp_augment_limit` переработка GC будет ограничиваться
   * преимущественно затраченным временем. */
  MDBX_opt_gc_time_limit,

  /** \brief Управляет выбором между стремлением к равномерности наполнения
   * страниц, либо уменьшением количества измененных и записанных страниц.
   *
   * \details После операций удаления страницы содержащие меньше минимума
   * ключей, либо опустошенные до \ref MDBX_opt_merge_threshold_16dot16_percent
   * подлежат слиянию с одной из соседних. Если страницы справа и слева от
   * текущей обе «грязные» (были изменены в ходе транзакции и должны быть
   * записаны на диск), либо обе «чисты» (не изменялись в текущей транзакции),
   * то целью для слияния всегда выбирается менее заполненная страница.
   * Когда же только одна из соседствующих является «грязной», а другая
   * «чистой», то возможны две тактики выбора цели для слияния:
   *
   *  - Если `MDBX_opt_prefer_waf_insteadof_balance = True`, то будет выбрана
   *    уже измененная страница, что НЕ УВЕЛИЧИТ количество измененных страниц
   *    и объем записи на диск при фиксации текущей транзакции, но в среднем
   *    будет УВЕЛИЧИВАТЬ неравномерность заполнения страниц.
   *
   *  - Если `MDBX_opt_prefer_waf_insteadof_balance = False`, то будет выбрана
   *    менее заполненная страница, что УВЕЛИЧИТ количество измененных страниц
   *    и объем записи на диск при фиксации текущей транзакции, но в среднем
   *    будет УМЕНЬШАТЬ неравномерность заполнения страниц.
   *
   * \see MDBX_opt_merge_threshold_16dot16_percent */
  MDBX_opt_prefer_waf_insteadof_balance,

  /** \brief Задаёт в % максимальный размер вложенных страниц, используемых для
   * размещения небольшого количества мульти-значений связанных с одном ключем.
   *
   * Использование вложенных страниц, вместо выноса значений на отдельные
   * страницы вложенного дерева, позволяет уменьшить объем неиспользуемого места
   * и этим увеличить плотность размещения данных.
   *
   * Но с увеличением размера вложенных страниц требуется больше листовых
   * страниц основного дерева, что также увеличивает высоту основного дерева.
   * Кроме этого, изменение данных на вложенных страницах требует дополнительных
   * копирований, поэтому стоимость может быть больше во многих сценариях.
   *
   * min 12.5% (8192), max 100% (65535), default = 100% */
  MDBX_opt_subpage_limit,

  /** \brief Задаёт в % минимальный объём свободного места на основной странице,
   * при отсутствии которого вложенные страницы выносятся в отдельное дерево.
   *
   * min 0, max 100% (65535), default = 0 */
  MDBX_opt_subpage_room_threshold,

  /** \brief Задаёт в % минимальный объём свободного места на основной странице,
   * при наличии которого, производится резервирование места во вложенной.
   *
   * Если на основной странице свободного места недостаточно, то вложенная
   * страница будет минимального размера. В свою очередь, при отсутствии резерва
   * во вложенной странице, каждое добавлении в неё элементов будет требовать
   * переформирования основной страниц с переносом всех узлов данных.
   *
   * Поэтому резервирование места, как правило, выгодно в сценариях с
   * интенсивным добавлением коротких мульти-значений, например при
   * индексировании. Но уменьшает плотность размещения данных, соответственно
   * увеличивает объем БД и операций ввода-вывода.
   *
   * min 0, max 100% (65535), default = 42% (27525) */
  MDBX_opt_subpage_reserve_prereq,

  /** \brief Задаёт в % ограничение резервирования места на вложенных страницах.
   *
   * min 0, max 100% (65535), default = 4.2% (2753) */
  MDBX_opt_subpage_reserve_limit
} MDBX_option_t;

/** \brief Sets the value of a extra runtime options for an environment.
 * \ingroup c_settings
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [in] option  The option from \ref MDBX_option_t to set value of it.
 * \param [in] value   The value of option to be set.
 *
 * \see MDBX_option_t
 * \see mdbx_env_get_option()
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_option(MDBX_env *env, const MDBX_option_t option,
                                    uint64_t value);

/** \brief Gets the value of extra runtime options from an environment.
 * \ingroup c_settings
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [in] option  The option from \ref MDBX_option_t to get value of it.
 * \param [out] pvalue The address where the option's value will be stored.
 *
 * \see MDBX_option_t
 * \see mdbx_env_get_option()
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_get_option(const MDBX_env *env,
                                    const MDBX_option_t option,
                                    uint64_t *pvalue);

/** \brief Open an environment instance.
 * \ingroup c_opening
 *
 * Indifferently this function will fails or not, the \ref mdbx_env_close() must
 * be called later to discard the \ref MDBX_env handle and release associated
 * resources.
 *
 * \note On Windows the \ref mdbx_env_openW() is recommended to use.
 *
 * \param [in] env       An environment handle returned
 *                       by \ref mdbx_env_create()
 *
 * \param [in] pathname  The pathname for the database or the directory in which
 *                       the database files reside. In the case of directory it
 *                       must already exist and be writable.
 *
 * \param [in] flags     Specifies options for this environment.
 *                       This parameter must be bitwise OR'ing together
 *                       any constants described above in the \ref env_flags
 *                       and \ref sync_modes sections.
 *
 * Flags set by mdbx_env_set_flags() are also used:
 *  - \ref MDBX_ENV_DEFAULTS, \ref MDBX_NOSUBDIR, \ref MDBX_RDONLY,
 *    \ref MDBX_EXCLUSIVE, \ref MDBX_WRITEMAP, \ref MDBX_NOSTICKYTHREADS,
 *    \ref MDBX_NORDAHEAD, \ref MDBX_NOMEMINIT, \ref MDBX_COALESCE,
 *    \ref MDBX_LIFORECLAIM. See \ref env_flags section.
 *
 *  - \ref MDBX_SYNC_DURABLE, \ref MDBX_NOMETASYNC, \ref MDBX_SAFE_NOSYNC,
 *    \ref MDBX_UTTERLY_NOSYNC. See \ref sync_modes section.
 *
 * \note `MDB_NOLOCK` flag don't supported by MDBX,
 *       try use \ref MDBX_EXCLUSIVE as a replacement.
 *
 * \note MDBX don't allow to mix processes with different \ref MDBX_SAFE_NOSYNC
 *       flags on the same environment.
 *       In such case \ref MDBX_INCOMPATIBLE will be returned.
 *
 * If the database is already exist and parameters specified early by
 * \ref mdbx_env_set_geometry() are incompatible (i.e. for instance, different
 * page size) then \ref mdbx_env_open() will return \ref MDBX_INCOMPATIBLE
 * error.
 *
 * \param [in] mode   The UNIX permissions to set on created files.
 *                    Zero value means to open existing, but do not create.
 *
 * \return A non-zero error value on failure and 0 on success,
 *         some possible errors are:
 * \retval MDBX_VERSION_MISMATCH The version of the MDBX library doesn't match
 *                            the version that created the database environment.
 * \retval MDBX_INVALID       The environment file headers are corrupted.
 * \retval MDBX_ENOENT        The directory specified by the path parameter
 *                            doesn't exist.
 * \retval MDBX_EACCES        The user didn't have permission to access
 *                            the environment files.
 * \retval MDBX_BUSY          The \ref MDBX_EXCLUSIVE flag was specified and the
 *                            environment is in use by another process,
 *                            or the current process tries to open environment
 *                            more than once.
 * \retval MDBX_INCOMPATIBLE  Environment is already opened by another process,
 *                            but with different set of \ref MDBX_SAFE_NOSYNC,
 *                            \ref MDBX_UTTERLY_NOSYNC flags.
 *                            Or if the database is already exist and parameters
 *                            specified early by \ref mdbx_env_set_geometry()
 *                            are incompatible (i.e. different pagesize, etc).
 *
 * \retval MDBX_WANNA_RECOVERY The \ref MDBX_RDONLY flag was specified but
 *                             read-write access is required to rollback
 *                             inconsistent state after a system crash.
 *
 * \retval MDBX_TOO_LARGE      Database is too large for this process,
 *                             i.e. 32-bit process tries to open >4Gb database.
 */
LIBMDBX_API int mdbx_env_open(MDBX_env *env, const char *pathname,
                              MDBX_env_flags_t flags, mdbx_mode_t mode);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_env_open()
 * \note Available only on Windows.
 * \see mdbx_env_open() */
LIBMDBX_API int mdbx_env_openW(MDBX_env *env, const wchar_t *pathname,
                               MDBX_env_flags_t flags, mdbx_mode_t mode);
#define mdbx_env_openT(env, pathname, flags, mode)                             \
  mdbx_env_openW(env, pathname, flags, mode)
#else
#define mdbx_env_openT(env, pathname, flags, mode)                             \
  mdbx_env_open(env, pathname, flags, mode)
#endif /* Windows */

/** \brief Deletion modes for \ref mdbx_env_delete().
 * \ingroup c_extra
 * \see mdbx_env_delete() */
typedef enum MDBX_env_delete_mode {
  /** \brief Just delete the environment's files and directory if any.
   * \note On POSIX systems, processes already working with the database will
   * continue to work without interference until it close the environment.
   * \note On Windows, the behavior of `MDBX_ENV_JUST_DELETE` is different
   * because the system does not support deleting files that are currently
   * memory mapped. */
  MDBX_ENV_JUST_DELETE = 0,
  /** \brief Make sure that the environment is not being used by other
   * processes, or return an error otherwise. */
  MDBX_ENV_ENSURE_UNUSED = 1,
  /** \brief Wait until other processes closes the environment before deletion.
   */
  MDBX_ENV_WAIT_FOR_UNUSED = 2,
} MDBX_env_delete_mode_t;

/** \brief Delete the environment's files in a proper and multiprocess-safe way.
 * \ingroup c_extra
 *
 * \note On Windows the \ref mdbx_env_deleteW() is recommended to use.
 *
 * \param [in] pathname  The pathname for the database or the directory in which
 *                       the database files reside.
 *
 * \param [in] mode      Specifies deletion mode for the environment. This
 *                       parameter must be set to one of the constants described
 *                       above in the \ref MDBX_env_delete_mode_t section.
 *
 * \note The \ref MDBX_ENV_JUST_DELETE don't supported on Windows since system
 * unable to delete a memory-mapped files.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_RESULT_TRUE   No corresponding files or directories were found,
 *                            so no deletion was performed. */
LIBMDBX_API int mdbx_env_delete(const char *pathname,
                                MDBX_env_delete_mode_t mode);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_env_delete()
 * \ingroup c_extra
 * \note Available only on Windows.
 * \see mdbx_env_delete() */
LIBMDBX_API int mdbx_env_deleteW(const wchar_t *pathname,
                                 MDBX_env_delete_mode_t mode);
#define mdbx_env_deleteT(pathname, mode) mdbx_env_deleteW(pathname, mode)
#else
#define mdbx_env_deleteT(pathname, mode) mdbx_env_delete(pathname, mode)
#endif /* Windows */

/** \brief Copy an MDBX environment to the specified path, with options.
 * \ingroup c_extra
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need.
 * \note This call can trigger significant file size growth if run in
 * parallel with write transactions, because it employs a read-only
 * transaction. See long-lived transactions under \ref restrictions section.
 *
 * \note On Windows the \ref mdbx_env_copyW() is recommended to use.
 * \see mdbx_env_copy2fd()
 * \see mdbx_txn_copy2pathname()
 *
 * \param [in] env    An environment handle returned by mdbx_env_create().
 *                    It must have already been opened successfully.
 * \param [in] dest   The pathname of a file in which the copy will reside.
 *                    This file must not be already exist, but parent directory
 *                    must be writable.
 * \param [in] flags  Specifies options for this operation. This parameter
 *                    must be bitwise OR'ing together any of the constants
 *                    described here:
 *
 *  - \ref MDBX_CP_DEFAULTS
 *      Perform copy as-is without compaction, etc.
 *
 *  - \ref MDBX_CP_COMPACT
 *      Perform compaction while copying: omit free pages and sequentially
 *      renumber all pages in output. This option consumes little bit more
 *      CPU for processing, but may running quickly than the default, on
 *      account skipping free pages.
 *
 *  - \ref MDBX_CP_FORCE_DYNAMIC_SIZE
 *      Force to make resizable copy, i.e. dynamic size instead of fixed.
 *
 *  - \ref MDBX_CP_DONT_FLUSH
 *      Don't explicitly flush the written data to an output media to reduce
 *      the time of the operation and the duration of the transaction.
 *
 *  - \ref MDBX_CP_THROTTLE_MVCC
 *      Use read transaction parking during copying MVCC-snapshot
 *      to avoid stopping recycling and overflowing the database.
 *      This allows the writing transaction to oust the read
 *      transaction used to copy the database if copying takes so long
 *      that it will interfere with the recycling old MVCC snapshots
 *      and may lead to an overflow of the database.
 *      However, if the reading transaction is ousted the copy will
 *      be aborted until successful completion. Thus, this option
 *      allows copy the database without interfering with write
 *      transactions and a threat of database overflow, but at the cost
 *      that copying will be aborted to prevent such conditions.
 *      \see mdbx_txn_park()
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_copy(MDBX_env *env, const char *dest,
                              MDBX_copy_flags_t flags);

/** \brief Copy an MDBX environment by given read transaction to the specified
 * path, with options.
 * \ingroup c_extra
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need.
 * \note This call can trigger significant file size growth if run in
 * parallel with write transactions, because it employs a read-only
 * transaction. See long-lived transactions under \ref restrictions section.
 *
 * \note On Windows the \ref mdbx_txn_copy2pathnameW() is recommended to use.
 * \see mdbx_txn_copy2fd()
 * \see mdbx_env_copy()
 *
 * \param [in] txn    A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dest   The pathname of a file in which the copy will reside.
 *                    This file must not be already exist, but parent directory
 *                    must be writable.
 * \param [in] flags  Specifies options for this operation. This parameter
 *                    must be bitwise OR'ing together any of the constants
 *                    described here:
 *
 *  - \ref MDBX_CP_DEFAULTS
 *      Perform copy as-is without compaction, etc.
 *
 *  - \ref MDBX_CP_COMPACT
 *      Perform compaction while copying: omit free pages and sequentially
 *      renumber all pages in output. This option consumes little bit more
 *      CPU for processing, but may running quickly than the default, on
 *      account skipping free pages.
 *
 *  - \ref MDBX_CP_FORCE_DYNAMIC_SIZE
 *      Force to make resizable copy, i.e. dynamic size instead of fixed.
 *
 *  - \ref MDBX_CP_DONT_FLUSH
 *      Don't explicitly flush the written data to an output media to reduce
 *      the time of the operation and the duration of the transaction.
 *
 *  - \ref MDBX_CP_THROTTLE_MVCC
 *      Use read transaction parking during copying MVCC-snapshot
 *      to avoid stopping recycling and overflowing the database.
 *      This allows the writing transaction to oust the read
 *      transaction used to copy the database if copying takes so long
 *      that it will interfere with the recycling old MVCC snapshots
 *      and may lead to an overflow of the database.
 *      However, if the reading transaction is ousted the copy will
 *      be aborted until successful completion. Thus, this option
 *      allows copy the database without interfering with write
 *      transactions and a threat of database overflow, but at the cost
 *      that copying will be aborted to prevent such conditions.
 *      \see mdbx_txn_park()
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_copy2pathname(MDBX_txn *txn, const char *dest,
                                       MDBX_copy_flags_t flags);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_env_copy()
 * \ingroup c_extra
 * \note Available only on Windows.
 * \see mdbx_env_copy() */
LIBMDBX_API int mdbx_env_copyW(MDBX_env *env, const wchar_t *dest,
                               MDBX_copy_flags_t flags);
#define mdbx_env_copyT(env, dest, flags) mdbx_env_copyW(env, dest, flags)

/** \copydoc mdbx_txn_copy2pathname()
 * \ingroup c_extra
 * \note Available only on Windows.
 * \see mdbx_txn_copy2pathname() */
LIBMDBX_API int mdbx_txn_copy2pathnameW(MDBX_txn *txn, const wchar_t *dest,
                                        MDBX_copy_flags_t flags);
#define mdbx_txn_copy2pathnameT(txn, dest, flags)                              \
  mdbx_txn_copy2pathnameW(txn, dest, path)
#else
#define mdbx_env_copyT(env, dest, flags) mdbx_env_copy(env, dest, flags)
#define mdbx_txn_copy2pathnameT(txn, dest, flags)                              \
  mdbx_txn_copy2pathname(txn, dest, path)
#endif /* Windows */

/** \brief Copy an environment to the specified file descriptor, with
 * options.
 * \ingroup c_extra
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need.
 * \see mdbx_env_copy()
 * \see mdbx_txn_copy2fd()
 *
 * \note This call can trigger significant file size growth if run in
 *       parallel with write transactions, because it employs a read-only
 *       transaction. See long-lived transactions under \ref restrictions
 *       section.
 *
 * \note Fails if the environment has suffered a page leak and the destination
 *       file descriptor is associated with a pipe, socket, or FIFO.
 *
 * \param [in] env     An environment handle returned by mdbx_env_create().
 *                     It must have already been opened successfully.
 * \param [in] fd      The file descriptor to write the copy to. It must have
 *                     already been opened for Write access.
 * \param [in] flags   Special options for this operation. \see mdbx_env_copy()
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_copy2fd(MDBX_env *env, mdbx_filehandle_t fd,
                                 MDBX_copy_flags_t flags);

/** \brief Copy an environment by given read transaction to the specified file
 * descriptor, with options.
 * \ingroup c_extra
 *
 * This function may be used to make a backup of an existing environment.
 * No lockfile is created, since it gets recreated at need.
 * \see mdbx_txn_copy2pathname()
 * \see mdbx_env_copy2fd()
 *
 * \note This call can trigger significant file size growth if run in
 *       parallel with write transactions, because it employs a read-only
 *       transaction. See long-lived transactions under \ref restrictions
 *       section.
 *
 * \note Fails if the environment has suffered a page leak and the destination
 *       file descriptor is associated with a pipe, socket, or FIFO.
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] fd      The file descriptor to write the copy to. It must have
 *                     already been opened for Write access.
 * \param [in] flags   Special options for this operation. \see mdbx_env_copy()
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_copy2fd(MDBX_txn *txn, mdbx_filehandle_t fd,
                                 MDBX_copy_flags_t flags);

/** \brief Statistics for a table in the environment
 * \ingroup c_statinfo
 * \see mdbx_env_stat_ex() \see mdbx_dbi_stat() */
struct MDBX_stat {
  uint32_t ms_psize; /**< Size of a table page. This is the same for all tables
                        in a database. */
  uint32_t ms_depth; /**< Depth (height) of the B-tree */
  uint64_t ms_branch_pages;   /**< Number of internal (non-leaf) pages */
  uint64_t ms_leaf_pages;     /**< Number of leaf pages */
  uint64_t ms_overflow_pages; /**< Number of large/overflow pages */
  uint64_t ms_entries;        /**< Number of data items */
  uint64_t ms_mod_txnid; /**< Transaction ID of committed last modification */
};
#ifndef __cplusplus
/** \ingroup c_statinfo */
typedef struct MDBX_stat MDBX_stat;
#endif

/** \brief Return statistics about the MDBX environment.
 * \ingroup c_statinfo
 *
 * At least one of `env` or `txn` argument must be non-null. If txn is passed
 * non-null then stat will be filled accordingly to the given transaction.
 * Otherwise, if txn is null, then stat will be populated by a snapshot from
 * the last committed write transaction, and at next time, other information
 * can be returned.
 *
 * Legacy mdbx_env_stat() correspond to calling \ref mdbx_env_stat_ex() with the
 * null `txn` argument.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create()
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin()
 * \param [out] stat   The address of an \ref MDBX_stat structure where
 *                     the statistics will be copied
 * \param [in] bytes   The size of \ref MDBX_stat.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_stat_ex(const MDBX_env *env, const MDBX_txn *txn,
                                 MDBX_stat *stat, size_t bytes);

/** \brief Return statistics about the MDBX environment.
 * \ingroup c_statinfo
 * \deprecated Please use mdbx_env_stat_ex() instead. */
MDBX_DEPRECATED LIBMDBX_INLINE_API(int, mdbx_env_stat,
                                   (const MDBX_env *env, MDBX_stat *stat,
                                    size_t bytes)) {
  return mdbx_env_stat_ex(env, NULL, stat, bytes);
}

/** \brief Information about the environment
 * \ingroup c_statinfo
 * \see mdbx_env_info_ex() */
struct MDBX_envinfo {
  struct {
    uint64_t lower;   /**< Lower limit for datafile size */
    uint64_t upper;   /**< Upper limit for datafile size */
    uint64_t current; /**< Current datafile size */
    uint64_t shrink;  /**< Shrink threshold for datafile */
    uint64_t grow;    /**< Growth step for datafile */
  } mi_geo;
  uint64_t mi_mapsize;             /**< Size of the data memory map */
  uint64_t mi_last_pgno;           /**< Number of the last used page */
  uint64_t mi_recent_txnid;        /**< ID of the last committed transaction */
  uint64_t mi_latter_reader_txnid; /**< ID of the last reader transaction */
  uint64_t mi_self_latter_reader_txnid; /**< ID of the last reader transaction
                                           of caller process */
  uint64_t mi_meta_txnid[3], mi_meta_sign[3];
  uint32_t mi_maxreaders;   /**< Total reader slots in the environment */
  uint32_t mi_numreaders;   /**< Max reader slots used in the environment */
  uint32_t mi_dxb_pagesize; /**< Database pagesize */
  uint32_t mi_sys_pagesize; /**< System pagesize */

  /** \brief A mostly unique ID that is regenerated on each boot.

   As such it can be used to identify the local machine's current boot. MDBX
   uses such when open the database to determine whether rollback required to
   the last steady sync point or not. I.e. if current bootid is differ from the
   value within a database then the system was rebooted and all changes since
   last steady sync must be reverted for data integrity. Zeros mean that no
   relevant information is available from the system. */
  struct {
    struct {
      uint64_t x, y;
    } current, meta[3];
  } mi_bootid;

  /** Bytes not explicitly synchronized to disk */
  uint64_t mi_unsync_volume;
  /** Current auto-sync threshold, see \ref mdbx_env_set_syncbytes(). */
  uint64_t mi_autosync_threshold;
  /** Time since entering to a "dirty" out-of-sync state in units of 1/65536 of
   * second. In other words, this is the time since the last non-steady commit
   * or zero if it was steady. */
  uint32_t mi_since_sync_seconds16dot16;
  /** Current auto-sync period in 1/65536 of second,
   * see \ref mdbx_env_set_syncperiod(). */
  uint32_t mi_autosync_period_seconds16dot16;
  /** Time since the last readers check in 1/65536 of second,
   * see \ref mdbx_reader_check(). */
  uint32_t mi_since_reader_check_seconds16dot16;
  /** Current environment mode.
   * The same as \ref mdbx_env_get_flags() returns. */
  uint32_t mi_mode;

  /** Statistics of page operations.
   * \details Overall statistics of page operations of all (running, completed
   * and aborted) transactions in the current multi-process session (since the
   * first process opened the database after everyone had previously closed it).
   */
  struct {
    uint64_t newly;    /**< Quantity of a new pages added */
    uint64_t cow;      /**< Quantity of pages copied for update */
    uint64_t clone;    /**< Quantity of parent's dirty pages clones
                            for nested transactions */
    uint64_t split;    /**< Page splits */
    uint64_t merge;    /**< Page merges */
    uint64_t spill;    /**< Quantity of spilled dirty pages */
    uint64_t unspill;  /**< Quantity of unspilled/reloaded pages */
    uint64_t wops;     /**< Number of explicit write operations (not a pages)
                            to a disk */
    uint64_t prefault; /**< Number of prefault write operations (not a pages) */
    uint64_t mincore;  /**< Number of mincore() calls */
    uint64_t
        msync; /**< Number of explicit msync-to-disk operations (not a pages) */
    uint64_t
        fsync; /**< Number of explicit fsync-to-disk operations (not a pages) */
  } mi_pgop_stat;

  /* GUID of the database DXB file. */
  struct {
    uint64_t x, y;
  } mi_dxbid;
};
#ifndef __cplusplus
/** \ingroup c_statinfo */
typedef struct MDBX_envinfo MDBX_envinfo;
#endif

/** \brief Return information about the MDBX environment.
 * \ingroup c_statinfo
 *
 * At least one of `env` or `txn` argument must be non-null. If txn is passed
 * non-null then stat will be filled accordingly to the given transaction.
 * Otherwise, if txn is null, then stat will be populated by a snapshot from
 * the last committed write transaction, and at next time, other information
 * can be returned.
 *
 * Legacy \ref mdbx_env_info() correspond to calling \ref mdbx_env_info_ex()
 * with the null `txn` argument.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create()
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin()
 * \param [out] info   The address of an \ref MDBX_envinfo structure
 *                     where the information will be copied
 * \param [in] bytes   The actual size of \ref MDBX_envinfo,
 *                     this value is used to provide ABI compatibility.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_info_ex(const MDBX_env *env, const MDBX_txn *txn,
                                 MDBX_envinfo *info, size_t bytes);
/** \brief Return information about the MDBX environment.
 * \ingroup c_statinfo
 * \deprecated Please use mdbx_env_info_ex() instead. */
MDBX_DEPRECATED LIBMDBX_INLINE_API(int, mdbx_env_info,
                                   (const MDBX_env *env, MDBX_envinfo *info,
                                    size_t bytes)) {
  return mdbx_env_info_ex(env, NULL, info, bytes);
}

/** \brief Flush the environment data buffers to disk.
 * \ingroup c_extra
 *
 * Unless the environment was opened with no-sync flags (\ref MDBX_NOMETASYNC,
 * \ref MDBX_SAFE_NOSYNC and \ref MDBX_UTTERLY_NOSYNC), then
 * data is always written an flushed to disk when \ref mdbx_txn_commit() is
 * called. Otherwise \ref mdbx_env_sync() may be called to manually write and
 * flush unsynced data to disk.
 *
 * Besides, \ref mdbx_env_sync_ex() with argument `force=false` may be used to
 * provide polling mode for lazy/asynchronous sync in conjunction with
 * \ref mdbx_env_set_syncbytes() and/or \ref mdbx_env_set_syncperiod().
 *
 * \note This call is not valid if the environment was opened with MDBX_RDONLY.
 *
 * \param [in] env      An environment handle returned by \ref mdbx_env_create()
 * \param [in] force    If non-zero, force a flush. Otherwise, If force is
 *                      zero, then will run in polling mode,
 *                      i.e. it will check the thresholds that were
 *                      set \ref mdbx_env_set_syncbytes()
 *                      and/or \ref mdbx_env_set_syncperiod() and perform flush
 *                      if at least one of the thresholds is reached.
 *
 * \param [in] nonblock Don't wait if write transaction
 *                      is running by other thread.
 *
 * \returns A non-zero error value on failure and \ref MDBX_RESULT_TRUE or 0 on
 *     success. The \ref MDBX_RESULT_TRUE means no data pending for flush
 *     to disk, and 0 otherwise. Some possible errors are:
 *
 * \retval MDBX_EACCES   The environment is read-only.
 * \retval MDBX_BUSY     The environment is used by other thread
 *                       and `nonblock=true`.
 * \retval MDBX_EINVAL   An invalid parameter was specified.
 * \retval MDBX_EIO      An error occurred during the flushing/writing data
 *                       to a storage medium/disk. */
LIBMDBX_API int mdbx_env_sync_ex(MDBX_env *env, bool force, bool nonblock);

/** \brief The shortcut to calling \ref mdbx_env_sync_ex() with
 * the `force=true` and `nonblock=false` arguments.
 * \ingroup c_extra */
LIBMDBX_INLINE_API(int, mdbx_env_sync, (MDBX_env * env)) {
  return mdbx_env_sync_ex(env, true, false);
}

/** \brief The shortcut to calling \ref mdbx_env_sync_ex() with
 * the `force=false` and `nonblock=true` arguments.
 * \ingroup c_extra */
LIBMDBX_INLINE_API(int, mdbx_env_sync_poll, (MDBX_env * env)) {
  return mdbx_env_sync_ex(env, false, true);
}

/** \brief Sets threshold to force flush the data buffers to disk, even any of
 * \ref MDBX_SAFE_NOSYNC flag in the environment.
 * \ingroup c_settings
 * \see mdbx_env_get_syncbytes \see MDBX_opt_sync_bytes
 *
 * The threshold value affects all processes which operates with given
 * environment until the last process close environment or a new value will be
 * settled.
 *
 * Data is always written to disk when \ref mdbx_txn_commit() is called, but
 * the operating system may keep it buffered. MDBX always flushes the OS buffers
 * upon commit as well, unless the environment was opened with
 * \ref MDBX_SAFE_NOSYNC, \ref MDBX_UTTERLY_NOSYNC
 * or in part \ref MDBX_NOMETASYNC.
 *
 * The default is 0, than mean no any threshold checked, and no additional
 * flush will be made.
 *
 * \param [in] env         An environment handle returned by mdbx_env_create().
 * \param [in] threshold   The size in bytes of summary changes when
 *                         a synchronous flush would be made.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_INLINE_API(int, mdbx_env_set_syncbytes,
                   (MDBX_env * env, size_t threshold)) {
  return mdbx_env_set_option(env, MDBX_opt_sync_bytes, threshold);
}

/** \brief Get threshold to force flush the data buffers to disk, even any of
 * \ref MDBX_SAFE_NOSYNC flag in the environment.
 * \ingroup c_statinfo
 * \see mdbx_env_set_syncbytes() \see MDBX_opt_sync_bytes
 *
 * \param [in] env       An environment handle returned
 *                       by \ref mdbx_env_create().
 * \param [out] threshold  Address of an size_t to store
 *                         the number of bytes of summary changes when
 *                         a synchronous flush would be made.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_INLINE_API(int, mdbx_env_get_syncbytes,
                   (const MDBX_env *env, size_t *threshold)) {
  int rc = MDBX_EINVAL;
  if (threshold) {
    uint64_t proxy = 0;
    rc = mdbx_env_get_option(env, MDBX_opt_sync_bytes, &proxy);
#ifdef assert
    assert(proxy <= SIZE_MAX);
#endif /* assert */
    *threshold = (size_t)proxy;
  }
  return rc;
}

/** \brief Sets relative period since the last unsteady commit to force flush
 * the data buffers to disk, even of \ref MDBX_SAFE_NOSYNC flag in the
 * environment.
 * \ingroup c_settings
 * \see mdbx_env_get_syncperiod \see MDBX_opt_sync_period
 *
 * The relative period value affects all processes which operates with given
 * environment until the last process close environment or a new value will be
 * settled.
 *
 * Data is always written to disk when \ref mdbx_txn_commit() is called, but the
 * operating system may keep it buffered. MDBX always flushes the OS buffers
 * upon commit as well, unless the environment was opened with
 * \ref MDBX_SAFE_NOSYNC or in part \ref MDBX_NOMETASYNC.
 *
 * Settled period don't checked asynchronously, but only by the
 * \ref mdbx_txn_commit() and \ref mdbx_env_sync() functions. Therefore, in
 * cases where transactions are committed infrequently and/or irregularly,
 * polling by \ref mdbx_env_sync() may be a reasonable solution to timeout
 * enforcement.
 *
 * The default is 0, than mean no any timeout checked, and no additional
 * flush will be made.
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 * \param [in] seconds_16dot16  The period in 1/65536 of second when
 *                              a synchronous flush would be made since
 *                              the last unsteady commit.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_INLINE_API(int, mdbx_env_set_syncperiod,
                   (MDBX_env * env, unsigned seconds_16dot16)) {
  return mdbx_env_set_option(env, MDBX_opt_sync_period, seconds_16dot16);
}

/** \brief Get relative period since the last unsteady commit to force flush
 * the data buffers to disk, even of \ref MDBX_SAFE_NOSYNC flag in the
 * environment.
 * \ingroup c_statinfo
 * \see mdbx_env_set_syncperiod() \see MDBX_opt_sync_period
 *
 * \param [in] env       An environment handle returned
 *                       by \ref mdbx_env_create().
 * \param [out] period_seconds_16dot16  Address of an size_t to store
 *                                      the period in 1/65536 of second when
 *                                      a synchronous flush would be made since
 *                                      the last unsteady commit.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_INLINE_API(int, mdbx_env_get_syncperiod,
                   (const MDBX_env *env, unsigned *period_seconds_16dot16)) {
  int rc = MDBX_EINVAL;
  if (period_seconds_16dot16) {
    uint64_t proxy = 0;
    rc = mdbx_env_get_option(env, MDBX_opt_sync_period, &proxy);
#ifdef assert
    assert(proxy <= UINT32_MAX);
#endif /* assert */
    *period_seconds_16dot16 = (unsigned)proxy;
  }
  return rc;
}

/** \brief Close the environment and release the memory map.
 * \ingroup c_opening
 *
 * Only a single thread may call this function. All transactions, tables,
 * and cursors must already be closed before calling this function. Attempts
 * to use any such handles after calling this function is UB and would cause
 * a `SIGSEGV`. The environment handle will be freed and must not be used again
 * after this call.
 *
 * \param [in] env        An environment handle returned by
 *                        \ref mdbx_env_create().
 *
 * \param [in] dont_sync  A dont'sync flag, if non-zero the last checkpoint
 *                        will be kept "as is" and may be still "weak" in the
 *                        \ref MDBX_SAFE_NOSYNC or \ref MDBX_UTTERLY_NOSYNC
 *                        modes. Such "weak" checkpoint will be ignored on
 *                        opening next time, and transactions since the last
 *                        non-weak checkpoint (meta-page update) will rolledback
 *                        for consistency guarantee.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_BUSY   The write transaction is running by other thread,
 *                     in such case \ref MDBX_env instance has NOT be destroyed
 *                     not released!
 *                     \note If any OTHER error code was returned then
 *                     given MDBX_env instance has been destroyed and released.
 *
 * \retval MDBX_EBADSIGN  Environment handle already closed or not valid,
 *                        i.e. \ref mdbx_env_close() was already called for the
 *                        `env` or was not created by \ref mdbx_env_create().
 *
 * \retval MDBX_PANIC  If \ref mdbx_env_close_ex() was called in the child
 *                     process after `fork()`. In this case \ref MDBX_PANIC
 *                     is expected, i.e. \ref MDBX_env instance was freed in
 *                     proper manner.
 *
 * \retval MDBX_EIO    An error occurred during the flushing/writing data
 *                     to a storage medium/disk. */
LIBMDBX_API int mdbx_env_close_ex(MDBX_env *env, bool dont_sync);

/** \brief The shortcut to calling \ref mdbx_env_close_ex() with
 * the `dont_sync=false` argument.
 * \ingroup c_opening */
LIBMDBX_INLINE_API(int, mdbx_env_close, (MDBX_env * env)) {
  return mdbx_env_close_ex(env, false);
}

#if defined(DOXYGEN) || !(defined(_WIN32) || defined(_WIN64))
/** \brief Восстанавливает экземпляр среды в дочернем процессе после ветвления
 * родительского процесса посредством `fork()` и родственных системных вызовов.
 * \ingroup c_extra
 *
 * Без вызова \ref mdbx_env_resurrect_after_fork() использование открытого
 * экземпляра среды в дочернем процессе не возможно, включая все выполняющиеся
 * на момент ветвления транзакции.
 *
 * Выполняемые функцией действия можно рассматривать как повторное открытие БД
 * в дочернем процессе, с сохранением заданных опций и адресов уже созданных
 * экземпляров объектов связанных с API.
 *
 * \note Функция не доступна в ОС семейства Windows по причине отсутствия
 * функционала ветвления процесса в API операционной системы.
 *
 * Ветвление не оказывает влияния на состояние MDBX-среды в родительском
 * процессе. Все транзакции, которые были в родительском процессе на момент
 * ветвления, после ветвления в родительском процессе продолжат выполняться без
 * помех. Но в дочернем процессе все соответствующие транзакции безальтернативно
 * перестают быть валидными, а попытка их использования приведет к возврату
 * ошибки или отправке `SIGSEGV`.
 *
 * Использование экземпляра среды в дочернем процессе не возможно до вызова
 * \ref mdbx_env_resurrect_after_fork(), так как в результате ветвления у
 * процесса меняется PID, значение которого используется для организации
 * совместно работы с БД, в том числе, для отслеживания процессов/потоков
 * выполняющих читающие транзакции связанные с соответствующими снимками данных.
 * Все активные на момент ветвления транзакции не могут продолжаться в дочернем
 * процессе, так как не владеют какими-либо блокировками или каким-либо снимком
 * данных и не удерживает его от переработки при сборке мусора.
 *
 * Функция \ref mdbx_env_resurrect_after_fork() восстанавливает переданный
 * экземпляр среды в дочернем процессе после ветвления, а именно: обновляет
 * используемые системные идентификаторы, повторно открывает дескрипторы файлов,
 * производит захват необходимых блокировок связанных с LCK- и DXB-файлами БД,
 * восстанавливает отображения в память страницы БД, таблицы читателей и
 * служебных/вспомогательных данных в память. Однако унаследованные от
 * родительского процесса транзакции не восстанавливаются, прием пишущие и
 * читающие транзакции обрабатываются по-разному:
 *
 *  - Пишущая транзакция, если таковая была на момент ветвления,
 *    прерывается в дочернем процессе с освобождение связанных с ней ресурсов,
 *    включая все вложенные транзакции.
 *
 *  - Читающие же транзакции, если таковые были в родительском процессе,
 *    в дочернем процессе логически прерываются, но без освобождения ресурсов.
 *    Поэтому необходимо обеспечить вызов \ref mdbx_txn_abort() для каждой
 *    такой читающей транзакций в дочернем процессе, либо смириться с утечкой
 *    ресурсов до завершения дочернего процесса.
 *
 * Причина не-освобождения ресурсов читающих транзакций в том, что исторически
 * MDBX не ведет какой-либо общий список экземпляров читающих, так как это не
 * требуется для штатных режимов работы, но требует использования атомарных
 * операций или дополнительных объектов синхронизации при создании/разрушении
 * экземпляров \ref MDBX_txn.
 *
 * Вызов \ref mdbx_env_resurrect_after_fork() без ветвления, не в дочернем
 * процессе, либо повторные вызовы не приводят к каким-либо действиям или
 * изменениям.
 *
 * \param [in,out] env   Экземпляр среды созданный функцией
 *                       \ref mdbx_env_create().
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении.
 *          Некоторые возможные ошибки таковы:
 *
 * \retval MDBX_BUSY      В родительском процессе БД была открыта
 *                        в режиме \ref MDBX_EXCLUSIVE.
 *
 * \retval MDBX_EBADSIGN  При повреждении сигнатуры экземпляра объекта, а также
 *                        в случае одновременного вызова \ref
 *                        mdbx_env_resurrect_after_fork() из разных потоков.
 *
 * \retval MDBX_PANIC     Произошла критическая ошибка при восстановлении
 *                        экземпляра среды, либо такая ошибка уже была
 *                        до вызова функции. */
LIBMDBX_API int mdbx_env_resurrect_after_fork(MDBX_env *env);
#endif /* Windows */

/** \brief Warming up options
 * \ingroup c_settings
 * \anchor warmup_flags
 * \see mdbx_env_warmup() */
typedef enum MDBX_warmup_flags {
  /** By default \ref mdbx_env_warmup() just ask OS kernel to asynchronously
   * prefetch database pages. */
  MDBX_warmup_default = 0,

  /** Peeking all pages of allocated portion of the database
   * to force ones to be loaded into memory. However, the pages are just peeks
   * sequentially, so unused pages that are in GC will be loaded in the same
   * way as those that contain payload. */
  MDBX_warmup_force = 1,

  /** Using system calls to peeks pages instead of directly accessing ones,
   * which at the cost of additional overhead avoids killing the current
   * process by OOM-killer in a lack of memory condition.
   * \note Has effect only on POSIX (non-Windows) systems with conjunction
   * to \ref MDBX_warmup_force option. */
  MDBX_warmup_oomsafe = 2,

  /** Try to lock database pages in memory by `mlock()` on POSIX-systems
   * or `VirtualLock()` on Windows. Please refer to description of these
   * functions for reasonability of such locking and the information of
   * effects, including the system as a whole.
   *
   * Such locking in memory requires that the corresponding resource limits
   * (e.g. `RLIMIT_RSS`, `RLIMIT_MEMLOCK` or process working set size)
   * and the availability of system RAM are sufficiently high.
   *
   * On successful, all currently allocated pages, both unused in GC and
   * containing payload, will be locked in memory until the environment closes,
   * or explicitly unblocked by using \ref MDBX_warmup_release, or the
   * database geometry will changed, including its auto-shrinking. */
  MDBX_warmup_lock = 4,

  /** Alters corresponding current resource limits to be enough for lock pages
   * by \ref MDBX_warmup_lock. However, this option should be used in simpler
   * applications since takes into account only current size of this environment
   * disregarding all other factors. For real-world database application you
   * will need full-fledged management of resources and their limits with
   * respective engineering. */
  MDBX_warmup_touchlimit = 8,

  /** Release the lock that was performed before by \ref MDBX_warmup_lock. */
  MDBX_warmup_release = 16,
} MDBX_warmup_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_warmup_flags)

/** \brief Warms up the database by loading pages into memory,
 * optionally lock ones.
 * \ingroup c_settings
 *
 * Depending on the specified flags, notifies OS kernel about following access,
 * force loads the database pages, including locks ones in memory or releases
 * such a lock. However, the function does not analyze the b-tree nor the GC.
 * Therefore an unused pages that are in GC handled (i.e. will be loaded) in
 * the same way as those that contain payload.
 *
 * At least one of `env` or `txn` argument must be non-null.
 *
 * \param [in] env              An environment handle returned
 *                              by \ref mdbx_env_create().
 * \param [in] txn              A transaction handle returned
 *                              by \ref mdbx_txn_begin().
 * \param [in] flags            The \ref warmup_flags, bitwise OR'ed together.
 *
 * \param [in] timeout_seconds_16dot16  Optional timeout which checking only
 *                              during explicitly peeking database pages
 *                              for loading ones if the \ref MDBX_warmup_force
 *                              option was specified.
 *
 * \returns A non-zero error value on failure and 0 on success.
 * Some possible errors are:
 *
 * \retval MDBX_ENOSYS        The system does not support requested
 * operation(s).
 *
 * \retval MDBX_RESULT_TRUE   The specified timeout is reached during load
 *                            data into memory. */
LIBMDBX_API int mdbx_env_warmup(const MDBX_env *env, const MDBX_txn *txn,
                                MDBX_warmup_flags_t flags,
                                unsigned timeout_seconds_16dot16);

/** \brief Set environment flags.
 * \ingroup c_settings
 *
 * This may be used to set some flags in addition to those from
 * mdbx_env_open(), or to unset these flags.
 * \see mdbx_env_get_flags()
 *
 * \note In contrast to LMDB, the MDBX serialize threads via mutex while
 * changing the flags. Therefore this function will be blocked while a write
 * transaction running by other thread, or \ref MDBX_BUSY will be returned if
 * function called within a write transaction.
 *
 * \param [in] env      An environment handle returned
 *                      by \ref mdbx_env_create().
 * \param [in] flags    The \ref env_flags to change, bitwise OR'ed together.
 * \param [in] onoff    A non-zero value sets the flags, zero clears them.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL  An invalid parameter was specified. */
LIBMDBX_API int mdbx_env_set_flags(MDBX_env *env, MDBX_env_flags_t flags,
                                   bool onoff);

/** \brief Get environment flags.
 * \ingroup c_statinfo
 * \see mdbx_env_set_flags()
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [out] flags  The address of an integer to store the flags.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL An invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_flags(const MDBX_env *env, unsigned *flags);

/** \brief Return the path that was used in mdbx_env_open().
 * \ingroup c_statinfo
 *
 * \note On Windows the \ref mdbx_env_get_pathW() is recommended to use.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create()
 * \param [out] dest   Address of a string pointer to contain the path.
 *                     This is the actual string in the environment, not a
 *                     copy. It should not be altered in any way.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL  An invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_path(const MDBX_env *env, const char **dest);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_env_get_path()
 * \ingroup c_statinfo
 * \note Available only on Windows.
 * \see mdbx_env_get_path() */
LIBMDBX_API int mdbx_env_get_pathW(const MDBX_env *env, const wchar_t **dest);
#define mdbx_env_get_pathT(env, dest) mdbx_env_get_pathW(env, dest)
#else
#define mdbx_env_get_pathT(env, dest) mdbx_env_get_path(env, dest)
#endif /* Windows */

/** \brief Return the file descriptor for the given environment.
 * \ingroup c_statinfo
 *
 * \note All MDBX file descriptors have `FD_CLOEXEC` and
 *       couldn't be used after exec() and or `fork()`.
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 * \param [out] fd   Address of a int to contain the descriptor.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL  An invalid parameter was specified. */
LIBMDBX_API int mdbx_env_get_fd(const MDBX_env *env, mdbx_filehandle_t *fd);

/** \brief Set all size-related parameters of environment, including page size
 * and the min/max size of the memory map.
 * \ingroup c_settings
 *
 * In contrast to LMDB, the MDBX provide automatic size management of an
 * database according the given parameters, including shrinking and resizing
 * on the fly. From user point of view all of these just working. Nevertheless,
 * it is reasonable to know some details in order to make optimal decisions
 * when choosing parameters.
 *
 * \see mdbx_env_info_ex()
 *
 * Both \ref mdbx_env_set_geometry() and legacy \ref mdbx_env_set_mapsize() are
 * inapplicable to read-only opened environment.
 *
 * Both \ref mdbx_env_set_geometry() and legacy \ref mdbx_env_set_mapsize()
 * could be called either before or after \ref mdbx_env_open(), either within
 * the write transaction running by current thread or not:
 *
 *  - In case \ref mdbx_env_set_geometry() or legacy \ref mdbx_env_set_mapsize()
 *    was called BEFORE \ref mdbx_env_open(), i.e. for closed environment, then
 *    the specified parameters will be used for new database creation,
 *    or will be applied during opening if database exists and no other process
 *    using it.
 *
 *    If the database is already exist, opened with \ref MDBX_EXCLUSIVE or not
 *    used by any other process, and parameters specified by
 *    \ref mdbx_env_set_geometry() are incompatible (i.e. for instance,
 *    different page size) then \ref mdbx_env_open() will return
 *    \ref MDBX_INCOMPATIBLE error.
 *
 *    In another way, if database will opened read-only or will used by other
 *    process during calling \ref mdbx_env_open() that specified parameters will
 *    silently discarded (open the database with \ref MDBX_EXCLUSIVE flag
 *    to avoid this).
 *
 *  - In case \ref mdbx_env_set_geometry() or legacy \ref mdbx_env_set_mapsize()
 *    was called after \ref mdbx_env_open() WITHIN the write transaction running
 *    by current thread, then specified parameters will be applied as a part of
 *    write transaction, i.e. will not be completely visible to any others
 *    processes until the current write transaction has been committed by the
 *    current process. However, if transaction will be aborted, then the
 *    database file will be reverted to the previous size not immediately, but
 *    when a next transaction will be committed or when the database will be
 *    opened next time.
 *
 *  - In case \ref mdbx_env_set_geometry() or legacy \ref mdbx_env_set_mapsize()
 *    was called after \ref mdbx_env_open() but OUTSIDE a write transaction,
 *    then MDBX will execute internal pseudo-transaction to apply new parameters
 *    (but only if anything has been changed), and changes be visible to any
 *    others processes immediately after successful completion of function.
 *
 * Essentially a concept of "automatic size management" is simple and useful:
 *  - There are the lower and upper bounds of the database file size;
 *  - There is the growth step by which the database file will be increased,
 *    in case of lack of space;
 *  - There is the threshold for unused space, beyond which the database file
 *    will be shrunk;
 *  - The size of the memory map is also the maximum size of the database;
 *  - MDBX will automatically manage both the size of the database and the size
 *    of memory map, according to the given parameters.
 *
 * So, there some considerations about choosing these parameters:
 *  - The lower bound allows you to prevent database shrinking below certain
 *    reasonable size to avoid unnecessary resizing costs.
 *  - The upper bound allows you to prevent database growth above certain
 *    reasonable size. Besides, the upper bound defines the linear address space
 *    reservation in each process that opens the database. Therefore changing
 *    the upper bound is costly and may be required reopening environment in
 *    case of \ref MDBX_UNABLE_EXTEND_MAPSIZE errors, and so on. Therefore, this
 *    value should be chosen reasonable large, to accommodate future growth of
 *    the database.
 *  - The growth step must be greater than zero to allow the database to grow,
 *    but also reasonable not too small, since increasing the size by little
 *    steps will result a large overhead.
 *  - The shrink threshold must be greater than zero to allow the database
 *    to shrink but also reasonable not too small (to avoid extra overhead) and
 *    not less than growth step to avoid up-and-down flouncing.
 *  - The current size (i.e. `size_now` argument) is an auxiliary parameter for
 *    simulation legacy \ref mdbx_env_set_mapsize() and as workaround Windows
 *    issues (see below).
 *
 * Unfortunately, Windows has is a several issue
 * with resizing of memory-mapped file:
 *  - Windows unable shrinking a memory-mapped file (i.e memory-mapped section)
 *    in any way except unmapping file entirely and then map again. Moreover,
 *    it is impossible in any way when a memory-mapped file is used more than
 *    one process.
 *  - Windows does not provide the usual API to augment a memory-mapped file
 *    (i.e. a memory-mapped partition), but only by using "Native API"
 *    in an undocumented way.
 *
 * MDBX bypasses all Windows issues, but at a cost:
 *  - Ability to resize database on the fly requires an additional lock
 *    and release `SlimReadWriteLock` during each read-only transaction.
 *  - During resize all in-process threads should be paused and then resumed.
 *  - Shrinking of database file is performed only when it used by single
 *    process, i.e. when a database closes by the last process or opened
 *    by the first.
 *  = Therefore, the size_now argument may be useful to set database size
 *    by the first process which open a database, and thus avoid expensive
 *    remapping further.
 *
 * For create a new database with particular parameters, including the page
 * size, \ref mdbx_env_set_geometry() should be called after
 * \ref mdbx_env_create() and before \ref mdbx_env_open(). Once the database is
 * created, the page size cannot be changed. If you do not specify all or some
 * of the parameters, the corresponding default values will be used. For
 * instance, the default for database size is 10485760 bytes.
 *
 * If the mapsize is increased by another process, MDBX silently and
 * transparently adopt these changes at next transaction start. However,
 * \ref mdbx_txn_begin() will return \ref MDBX_UNABLE_EXTEND_MAPSIZE if new
 * mapping size could not be applied for current process (for instance if
 * address space is busy).  Therefore, in the case of
 * \ref MDBX_UNABLE_EXTEND_MAPSIZE error you need close and reopen the
 * environment to resolve error.
 *
 * \note Actual values may be different than your have specified because of
 * rounding to specified database page size, the system page size and/or the
 * size of the system virtual memory management unit. You can get actual values
 * by \ref mdbx_env_info_ex() or see by using the tool `mdbx_chk` with the `-v`
 * option.
 *
 * Legacy \ref mdbx_env_set_mapsize() correspond to calling
 * \ref mdbx_env_set_geometry() with the arguments `size_lower`, `size_now`,
 * `size_upper` equal to the `size` and `-1` (i.e. default) for all other
 * parameters.
 *
 * \param [in] env         An environment handle returned
 *                         by \ref mdbx_env_create()
 *
 * \param [in] size_lower  The lower bound of database size in bytes.
 *                         Zero value means "minimal acceptable",
 *                         and negative means "keep current or use default".
 *
 * \param [in] size_now    The size in bytes to setup the database size for
 *                         now. Zero value means "minimal acceptable", and
 *                         negative means "keep current or use default". So,
 *                         it is recommended always pass -1 in this argument
 *                         except some special cases.
 *
 * \param [in] size_upper The upper bound of database size in bytes.
 *                        Zero value means "minimal acceptable",
 *                        and negative means "keep current or use default".
 *                        It is recommended to avoid change upper bound while
 *                        database is used by other processes or threaded
 *                        (i.e. just pass -1 in this argument except absolutely
 *                        necessary). Otherwise you must be ready for
 *                        \ref MDBX_UNABLE_EXTEND_MAPSIZE error(s), unexpected
 *                        pauses during remapping and/or system errors like
 *                        "address busy", and so on. In other words, there
 *                        is no way to handle a growth of the upper bound
 *                        robustly because there may be a lack of appropriate
 *                        system resources (which are extremely volatile in
 *                        a multi-process multi-threaded environment).
 *
 * \param [in] growth_step  The growth step in bytes, must be greater than
 *                          zero to allow the database to grow. Negative value
 *                          means "keep current or use default".
 *
 * \param [in] shrink_threshold  The shrink threshold in bytes, must be greater
 *                               than zero to allow the database to shrink and
 *                               greater than growth_step to avoid shrinking
 *                               right after grow.
 *                               Negative value means "keep current
 *                               or use default". Default is 2*growth_step.
 *
 * \param [in] pagesize          The database page size for new database
 *                               creation or -1 otherwise. Once the database
 *                               is created, the page size cannot be changed.
 *                               Must be power of 2 in the range between
 *                               \ref MDBX_MIN_PAGESIZE and
 *                               \ref MDBX_MAX_PAGESIZE. Zero value means
 *                               "minimal acceptable", and negative means
 *                               "keep current or use default".
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL    An invalid parameter was specified,
 *                        or the environment has an active write transaction.
 * \retval MDBX_EPERM     Two specific cases for Windows:
 *                        1) Shrinking was disabled before via geometry settings
 *                        and now it enabled, but there are reading threads that
 *                        don't use the additional `SRWL` (which is required to
 *                        avoid Windows issues).
 *                        2) Temporary close memory mapped is required to change
 *                        geometry, but there read transaction(s) is running
 *                        and no corresponding thread(s) could be suspended
 *                        since the \ref MDBX_NOSTICKYTHREADS mode is used.
 * \retval MDBX_EACCESS   The environment opened in read-only.
 * \retval MDBX_MAP_FULL  Specified size smaller than the space already
 *                        consumed by the environment.
 * \retval MDBX_TOO_LARGE Specified size is too large, i.e. too many pages for
 *                        given size, or a 32-bit process requests too much
 *                        bytes for the 32-bit address space. */
LIBMDBX_API int mdbx_env_set_geometry(MDBX_env *env, intptr_t size_lower,
                                      intptr_t size_now, intptr_t size_upper,
                                      intptr_t growth_step,
                                      intptr_t shrink_threshold,
                                      intptr_t pagesize);

/** \deprecated Please use \ref mdbx_env_set_geometry() instead.
 * \ingroup c_settings */
MDBX_DEPRECATED LIBMDBX_INLINE_API(int, mdbx_env_set_mapsize,
                                   (MDBX_env * env, size_t size)) {
  return mdbx_env_set_geometry(env, size, size, size, -1, -1, -1);
}

/** \brief Find out whether to use readahead or not, based on the given database
 * size and the amount of available memory.
 * \ingroup c_extra
 *
 * \param [in] volume      The expected database size in bytes.
 * \param [in] redundancy  Additional reserve or overload in case of negative
 *                         value.
 *
 * \returns A \ref MDBX_RESULT_TRUE or \ref MDBX_RESULT_FALSE value,
 *          otherwise the error code.
 * \retval MDBX_RESULT_TRUE   Readahead is reasonable.
 * \retval MDBX_RESULT_FALSE  Readahead is NOT reasonable,
 *                            i.e. \ref MDBX_NORDAHEAD is useful to
 *                            open environment by \ref mdbx_env_open().
 * \retval Otherwise the error code. */
LIBMDBX_API int mdbx_is_readahead_reasonable(size_t volume,
                                             intptr_t redundancy);

/** \brief Returns the minimal database page size in bytes.
 * \ingroup c_statinfo */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_INLINE_API(intptr_t, mdbx_limits_pgsize_min,
                                               (void)) {
  return MDBX_MIN_PAGESIZE;
}

/** \brief Returns the maximal database page size in bytes.
 * \ingroup c_statinfo */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_INLINE_API(intptr_t, mdbx_limits_pgsize_max,
                                               (void)) {
  return MDBX_MAX_PAGESIZE;
}

/** \brief Returns minimal database size in bytes for given page size,
 * or -1 if pagesize is invalid.
 * \ingroup c_statinfo */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_dbsize_min(intptr_t pagesize);

/** \brief Returns maximal database size in bytes for given page size,
 * or -1 if pagesize is invalid.
 * \ingroup c_statinfo */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_dbsize_max(intptr_t pagesize);

/** \brief Returns maximal key size in bytes for given page size
 * and table flags, or -1 if pagesize is invalid.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_keysize_max(intptr_t pagesize, MDBX_db_flags_t flags);

/** \brief Returns minimal key size in bytes for given table flags.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_keysize_min(MDBX_db_flags_t flags);

/** \brief Returns maximal data size in bytes for given page size
 * and table flags, or -1 if pagesize is invalid.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_valsize_max(intptr_t pagesize, MDBX_db_flags_t flags);

/** \brief Returns minimal data size in bytes for given table flags.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_valsize_min(MDBX_db_flags_t flags);

/** \brief Returns maximal size of key-value pair to fit in a single page with
 * the given size and table flags, or -1 if pagesize is invalid.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_pairsize4page_max(intptr_t pagesize, MDBX_db_flags_t flags);

/** \brief Returns maximal data size in bytes to fit in a leaf-page or
 * single large/overflow-page with the given page size and table flags,
 * or -1 if pagesize is invalid.
 * \ingroup c_statinfo
 * \see db_flags */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_valsize4page_max(intptr_t pagesize, MDBX_db_flags_t flags);

/** \brief Returns maximal write transaction size (i.e. limit for summary volume
 * of dirty pages) in bytes for given page size, or -1 if pagesize is invalid.
 * \ingroup c_statinfo */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API intptr_t
mdbx_limits_txnsize_max(intptr_t pagesize);

/** \brief Set the maximum number of threads/reader slots for for all processes
 * interacts with the database.
 * \ingroup c_settings
 *
 * \details This defines the number of slots in the lock table that is used to
 * track readers in the the environment. The default is about 100 for 4K system
 * page size. Starting a read-only transaction normally ties a lock table slot
 * to the current thread until the environment closes or the thread exits. If
 * \ref MDBX_NOSTICKYTHREADS is in use, \ref mdbx_txn_begin() instead ties the
 * slot to the \ref MDBX_txn object until it or the \ref MDBX_env object is
 * destroyed. This function may only be called after \ref mdbx_env_create() and
 * before \ref mdbx_env_open(), and has an effect only when the database is
 * opened by the first process interacts with the database.
 * \see mdbx_env_get_maxreaders()
 *
 * \param [in] env       An environment handle returned
 *                       by \ref mdbx_env_create().
 * \param [in] readers   The maximum number of reader lock table slots.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified.
 * \retval MDBX_EPERM    The environment is already open. */
LIBMDBX_INLINE_API(int, mdbx_env_set_maxreaders,
                   (MDBX_env * env, unsigned readers)) {
  return mdbx_env_set_option(env, MDBX_opt_max_readers, readers);
}

/** \brief Get the maximum number of threads/reader slots for the environment.
 * \ingroup c_statinfo
 * \see mdbx_env_set_maxreaders()
 *
 * \param [in] env       An environment handle returned
 *                       by \ref mdbx_env_create().
 * \param [out] readers  Address of an integer to store the number of readers.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_INLINE_API(int, mdbx_env_get_maxreaders,
                   (const MDBX_env *env, unsigned *readers)) {
  int rc = MDBX_EINVAL;
  if (readers) {
    uint64_t proxy = 0;
    rc = mdbx_env_get_option(env, MDBX_opt_max_readers, &proxy);
    *readers = (unsigned)proxy;
  }
  return rc;
}

/** \brief Set the maximum number of named tables for the environment.
 * \ingroup c_settings
 *
 * This function is only needed if multiple tables will be used in the
 * environment. Simpler applications that use the environment as a single
 * unnamed table can ignore this option.
 * This function may only be called after \ref mdbx_env_create() and before
 * \ref mdbx_env_open().
 *
 * Currently a moderate number of slots are cheap but a huge number gets
 * expensive: 7-120 words per transaction, and every \ref mdbx_dbi_open()
 * does a linear search of the opened slots.
 * \see mdbx_env_get_maxdbs()
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 * \param [in] dbs   The maximum number of tables.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified.
 * \retval MDBX_EPERM    The environment is already open. */
LIBMDBX_INLINE_API(int, mdbx_env_set_maxdbs, (MDBX_env * env, MDBX_dbi dbs)) {
  return mdbx_env_set_option(env, MDBX_opt_max_db, dbs);
}

/** \brief Get the maximum number of named tables for the environment.
 * \ingroup c_statinfo
 * \see mdbx_env_set_maxdbs()
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 * \param [out] dbs  Address to store the maximum number of tables.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_INLINE_API(int, mdbx_env_get_maxdbs,
                   (const MDBX_env *env, MDBX_dbi *dbs)) {
  int rc = MDBX_EINVAL;
  if (dbs) {
    uint64_t proxy = 0;
    rc = mdbx_env_get_option(env, MDBX_opt_max_db, &proxy);
    *dbs = (MDBX_dbi)proxy;
  }
  return rc;
}

/** \brief Returns the default size of database page for the current system.
 * \ingroup c_statinfo
 * \details Default size of database page depends on the size of the system
 * page and usually exactly match it. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API size_t mdbx_default_pagesize(void);

/** \brief Returns basic information about system RAM.
 * This function provides a portable way to get information about available RAM
 * and can be useful in that it returns the same information that libmdbx uses
 * internally to adjust various options and control readahead.
 * \ingroup c_statinfo
 *
 * \param [out] page_size     Optional address where the system page size
 *                            will be stored.
 * \param [out] total_pages   Optional address where the number of total RAM
 *                            pages will be stored.
 * \param [out] avail_pages   Optional address where the number of
 *                            available/free RAM pages will be stored.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_get_sysraminfo(intptr_t *page_size, intptr_t *total_pages,
                                    intptr_t *avail_pages);

/** \brief Returns the maximum size of keys can put.
 * \ingroup c_statinfo
 *
 * \param [in] env    An environment handle returned by \ref mdbx_env_create().
 * \param [in] flags  Table options (\ref MDBX_DUPSORT, \ref MDBX_INTEGERKEY
 *                    and so on). \see db_flags
 *
 * \returns The maximum size of a key can write,
 *          or -1 if something is wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_env_get_maxkeysize_ex(const MDBX_env *env, MDBX_db_flags_t flags);

/** \brief Returns the maximum size of data we can put.
 * \ingroup c_statinfo
 *
 * \param [in] env    An environment handle returned by \ref mdbx_env_create().
 * \param [in] flags  Table options (\ref MDBX_DUPSORT, \ref MDBX_INTEGERKEY
 *                    and so on). \see db_flags
 *
 * \returns The maximum size of a data can write,
 *          or -1 if something is wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_env_get_maxvalsize_ex(const MDBX_env *env, MDBX_db_flags_t flags);

/** \deprecated Please use \ref mdbx_env_get_maxkeysize_ex()
 *              and/or \ref mdbx_env_get_maxvalsize_ex()
 * \ingroup c_statinfo */
MDBX_NOTHROW_PURE_FUNCTION MDBX_DEPRECATED LIBMDBX_API int
mdbx_env_get_maxkeysize(const MDBX_env *env);

/** \brief Returns maximal size of key-value pair to fit in a single page
 * for specified table flags.
 * \ingroup c_statinfo
 *
 * \param [in] env    An environment handle returned by \ref mdbx_env_create().
 * \param [in] flags  Table options (\ref MDBX_DUPSORT, \ref MDBX_INTEGERKEY
 *                    and so on). \see db_flags
 *
 * \returns The maximum size of a data can write,
 *          or -1 if something is wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_env_get_pairsize4page_max(const MDBX_env *env, MDBX_db_flags_t flags);

/** \brief Returns maximal data size in bytes to fit in a leaf-page or
 * single large/overflow-page for specified table flags.
 * \ingroup c_statinfo
 *
 * \param [in] env    An environment handle returned by \ref mdbx_env_create().
 * \param [in] flags  Table options (\ref MDBX_DUPSORT, \ref MDBX_INTEGERKEY
 *                    and so on). \see db_flags
 *
 * \returns The maximum size of a data can write,
 *          or -1 if something is wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_env_get_valsize4page_max(const MDBX_env *env, MDBX_db_flags_t flags);

/** \brief Sets application information (a context pointer) associated with
 * the environment.
 * \see mdbx_env_get_userctx()
 * \ingroup c_settings
 *
 * \param [in] env  An environment handle returned by \ref mdbx_env_create().
 * \param [in] ctx  An arbitrary pointer for whatever the application needs.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_userctx(MDBX_env *env, void *ctx);

/** \brief Returns an application information (a context pointer) associated
 * with the environment.
 * \see mdbx_env_set_userctx()
 * \ingroup c_statinfo
 *
 * \param [in] env An environment handle returned by \ref mdbx_env_create()
 * \returns The pointer set by \ref mdbx_env_set_userctx()
 *          or `NULL` if something wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API void *
mdbx_env_get_userctx(const MDBX_env *env);

/** \brief Create a transaction with a user provided context pointer
 * for use with the environment.
 * \ingroup c_transactions
 *
 * The transaction handle may be discarded using \ref mdbx_txn_abort()
 * or \ref mdbx_txn_commit().
 * \see mdbx_txn_begin()
 *
 * \note A transaction and its cursors must only be used by a single thread,
 * and a thread may only have a single transaction at a time unless
 * the \ref MDBX_NOSTICKYTHREADS is used.
 *
 * \note Cursors may not span transactions.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 *
 * \param [in] parent  If this parameter is non-NULL, the new transaction will
 *                     be a nested transaction, with the transaction indicated
 *                     by parent as its parent. Transactions may be nested
 *                     to any level. A parent transaction and its cursors may
 *                     not issue any other operations than mdbx_txn_commit and
 *                     \ref mdbx_txn_abort() while it has active child
 *                     transactions.
 *
 * \param [in] flags   Special options for this transaction. This parameter
 *                     must be set to 0 or by bitwise OR'ing together one
 *                     or more of the values described here:
 *                      - \ref MDBX_RDONLY   This transaction will not perform
 *                                           any write operations.
 *
 *                      - \ref MDBX_TXN_TRY  Do not block when starting
 *                                           a write transaction.
 *
 *                      - \ref MDBX_SAFE_NOSYNC, \ref MDBX_NOMETASYNC.
 *                        Do not sync data to disk corresponding
 *                        to \ref MDBX_NOMETASYNC or \ref MDBX_SAFE_NOSYNC
 *                        description. \see sync_modes
 *
 * \param [out] txn    Address where the new \ref MDBX_txn handle
 *                     will be stored.
 *
 * \param [in] context A pointer to application context to be associated with
 *                     created transaction and could be retrieved by
 *                     \ref mdbx_txn_get_userctx() until transaction finished.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_PANIC         A fatal error occurred earlier and the
 *                            environment must be shut down.
 * \retval MDBX_UNABLE_EXTEND_MAPSIZE  Another process wrote data beyond
 *                                     this MDBX_env's mapsize and this
 *                                     environment map must be resized as well.
 *                                     See \ref mdbx_env_set_mapsize().
 * \retval MDBX_READERS_FULL  A read-only transaction was requested and
 *                            the reader lock table is full.
 *                            See \ref mdbx_env_set_maxreaders().
 * \retval MDBX_ENOMEM        Out of memory.
 * \retval MDBX_BUSY          The write transaction is already started by the
 *                            current thread. */
LIBMDBX_API int mdbx_txn_begin_ex(MDBX_env *env, MDBX_txn *parent,
                                  MDBX_txn_flags_t flags, MDBX_txn **txn,
                                  void *context);

/** \brief Create a transaction for use with the environment.
 * \ingroup c_transactions
 *
 * The transaction handle may be discarded using \ref mdbx_txn_abort()
 * or \ref mdbx_txn_commit().
 * \see mdbx_txn_begin_ex()
 *
 * \note A transaction and its cursors must only be used by a single thread,
 * and a thread may only have a single transaction at a time unless
 * the \ref MDBX_NOSTICKYTHREADS is used.
 *
 * \note Cursors may not span transactions.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 *
 * \param [in] parent  If this parameter is non-NULL, the new transaction will
 *                     be a nested transaction, with the transaction indicated
 *                     by parent as its parent. Transactions may be nested
 *                     to any level. A parent transaction and its cursors may
 *                     not issue any other operations than mdbx_txn_commit and
 *                     \ref mdbx_txn_abort() while it has active child
 *                     transactions.
 *
 * \param [in] flags   Special options for this transaction. This parameter
 *                     must be set to 0 or by bitwise OR'ing together one
 *                     or more of the values described here:
 *                      - \ref MDBX_RDONLY   This transaction will not perform
 *                                           any write operations.
 *
 *                      - \ref MDBX_TXN_TRY  Do not block when starting
 *                                           a write transaction.
 *
 *                      - \ref MDBX_SAFE_NOSYNC, \ref MDBX_NOMETASYNC.
 *                        Do not sync data to disk corresponding
 *                        to \ref MDBX_NOMETASYNC or \ref MDBX_SAFE_NOSYNC
 *                        description. \see sync_modes
 *
 * \param [out] txn    Address where the new \ref MDBX_txn handle
 *                     will be stored.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_PANIC         A fatal error occurred earlier and the
 *                            environment must be shut down.
 * \retval MDBX_UNABLE_EXTEND_MAPSIZE  Another process wrote data beyond
 *                                     this MDBX_env's mapsize and this
 *                                     environment map must be resized as well.
 *                                     See \ref mdbx_env_set_mapsize().
 * \retval MDBX_READERS_FULL  A read-only transaction was requested and
 *                            the reader lock table is full.
 *                            See \ref mdbx_env_set_maxreaders().
 * \retval MDBX_ENOMEM        Out of memory.
 * \retval MDBX_BUSY          The write transaction is already started by the
 *                            current thread. */
LIBMDBX_INLINE_API(int, mdbx_txn_begin,
                   (MDBX_env * env, MDBX_txn *parent, MDBX_txn_flags_t flags,
                    MDBX_txn **txn)) {
  return mdbx_txn_begin_ex(env, parent, flags, txn, NULL);
}

/** \brief Sets application information associated (a context pointer) with the
 * transaction.
 * \ingroup c_transactions
 * \see mdbx_txn_get_userctx()
 *
 * \param [in] txn  An transaction handle returned by \ref mdbx_txn_begin_ex()
 *                  or \ref mdbx_txn_begin().
 * \param [in] ctx  An arbitrary pointer for whatever the application needs.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_set_userctx(MDBX_txn *txn, void *ctx);

/** \brief Returns an application information (a context pointer) associated
 * with the transaction.
 * \ingroup c_transactions
 * \see mdbx_txn_set_userctx()
 *
 * \param [in] txn  An transaction handle returned by \ref mdbx_txn_begin_ex()
 *                  or \ref mdbx_txn_begin().
 * \returns The pointer which was passed via the `context` parameter
 *          of `mdbx_txn_begin_ex()` or set by \ref mdbx_txn_set_userctx(),
 *          or `NULL` if something wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API void *
mdbx_txn_get_userctx(const MDBX_txn *txn);

/** \brief Information about the transaction
 * \ingroup c_statinfo
 * \see mdbx_txn_info */
struct MDBX_txn_info {
  /** The ID of the transaction. For a READ-ONLY transaction, this corresponds
      to the snapshot being read. */
  uint64_t txn_id;

  /** For READ-ONLY transaction: the lag from a recent MVCC-snapshot, i.e. the
     number of committed transaction since read transaction started.
     For WRITE transaction (provided if `scan_rlt=true`): the lag of the oldest
     reader from current transaction (i.e. at least 1 if any reader running). */
  uint64_t txn_reader_lag;

  /** Used space by this transaction, i.e. corresponding to the last used
   * database page. */
  uint64_t txn_space_used;

  /** Current size of database file. */
  uint64_t txn_space_limit_soft;

  /** Upper bound for size the database file, i.e. the value `size_upper`
     argument of the appropriate call of \ref mdbx_env_set_geometry(). */
  uint64_t txn_space_limit_hard;

  /** For READ-ONLY transaction: The total size of the database pages that were
     retired by committed write transactions after the reader's MVCC-snapshot,
     i.e. the space which would be freed after the Reader releases the
     MVCC-snapshot for reuse by completion read transaction.
     For WRITE transaction: The summarized size of the database pages that were
     retired for now due Copy-On-Write during this transaction. */
  uint64_t txn_space_retired;

  /** For READ-ONLY transaction: the space available for writer(s) and that
     must be exhausted for reason to call the Handle-Slow-Readers callback for
     this read transaction.
     For WRITE transaction: the space inside transaction
     that left to `MDBX_TXN_FULL` error. */
  uint64_t txn_space_leftover;

  /** For READ-ONLY transaction (provided if `scan_rlt=true`): The space that
     actually become available for reuse when only this transaction will be
     finished.
     For WRITE transaction: The summarized size of the dirty database
     pages that generated during this transaction. */
  uint64_t txn_space_dirty;
};
#ifndef __cplusplus
/** \ingroup c_statinfo */
typedef struct MDBX_txn_info MDBX_txn_info;
#endif

/** \brief Return information about the MDBX transaction.
 * \ingroup c_statinfo
 *
 * \param [in] txn        A transaction handle returned by \ref mdbx_txn_begin()
 * \param [out] info      The address of an \ref MDBX_txn_info structure
 *                        where the information will be copied.
 * \param [in] scan_rlt   The boolean flag controls the scan of the read lock
 *                        table to provide complete information. Such scan
 *                        is relatively expensive and you can avoid it
 *                        if corresponding fields are not needed.
 *                        See description of \ref MDBX_txn_info.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_info(const MDBX_txn *txn, MDBX_txn_info *info,
                              bool scan_rlt);

/** \brief Returns the transaction's MDBX_env.
 * \ingroup c_transactions
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin() */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API MDBX_env *
mdbx_txn_env(const MDBX_txn *txn);

/** \brief Return the transaction's flags.
 * \ingroup c_transactions
 *
 * This returns the flags, including internal, associated with this transaction.
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A transaction flags, valid if input is an valid transaction,
 *          otherwise \ref MDBX_TXN_INVALID. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API MDBX_txn_flags_t
mdbx_txn_flags(const MDBX_txn *txn);

/** \brief Return the transaction's ID.
 * \ingroup c_statinfo
 *
 * This returns the identifier associated with this transaction. For a
 * read-only transaction, this corresponds to the snapshot being read;
 * concurrent readers will frequently have the same transaction ID.
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A transaction ID, valid if input is an active transaction,
 *          otherwise 0. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API uint64_t
mdbx_txn_id(const MDBX_txn *txn);

/** \brief Latency of commit stages in 1/65536 of seconds units.
 * \warning This structure may be changed in future releases.
 * \ingroup c_statinfo
 * \see mdbx_txn_commit_ex() */
struct MDBX_commit_latency {
  /** \brief Duration of preparation (commit child transactions, update
   * table's records and cursors destroying). */
  uint32_t preparation;
  /** \brief Duration of GC update by wall clock. */
  uint32_t gc_wallclock;
  /** \brief Duration of internal audit if enabled. */
  uint32_t audit;
  /** \brief Duration of writing dirty/modified data pages to a filesystem,
   * i.e. the summary duration of a `write()` syscalls during commit. */
  uint32_t write;
  /** \brief Duration of syncing written data to the disk/storage, i.e.
   * the duration of a `fdatasync()` or a `msync()` syscall during commit. */
  uint32_t sync;
  /** \brief Duration of transaction ending (releasing resources). */
  uint32_t ending;
  /** \brief The total duration of a commit. */
  uint32_t whole;
  /** \brief User-mode CPU time spent on GC update. */
  uint32_t gc_cputime;

  /** \brief Информация для профилирования работы GC.
   * \note Статистика является общей для всех процессов работающих с одним
   * файлом БД и хранится в LCK-файле. Данные аккумулируются при фиксации всех
   * транзакций, но только в сборках libmdbx c установленной опцией
   * \ref MDBX_ENABLE_PROFGC. Собранная статистика возвращаются любому процессу
   * при использовании \ref mdbx_txn_commit_ex() и одновременно обнуляется
   * при завершении транзакций верхнего уровня (не вложенных). */
  struct {
    /** \brief Количество итераций обновления GC,
     *  больше 1 если были повторы/перезапуски. */
    uint32_t wloops;
    /** \brief Количество итераций слияния записей GC. */
    uint32_t coalescences;
    /** \brief Количество уничтожений предыдущих надежных/устойчивых
     *  точек фиксации при работе в режиме \ref MDBX_UTTERLY_NOSYNC. */
    uint32_t wipes;
    /** \brief Количество принудительных фиксаций на диск
     *  во избежания приращения БД при работе вне режима
     *  \ref MDBX_UTTERLY_NOSYNC. */
    uint32_t flushes;
    /** \brief Количество обращений к механизму Handle-Slow-Readers
     *  во избежания приращения БД.
     *  \see MDBX_hsr_func */
    uint32_t kicks;

    /** \brief Счетчик выполнения по медленному пути (slow path execution count)
     *  GC ради данных пользователя. */
    uint32_t work_counter;
    /** \brief Время "по настенным часам" затраченное на чтение и поиск внутри
     *  GC ради данных пользователя. */
    uint32_t work_rtime_monotonic;
    /** \brief Время ЦПУ в режиме пользователе затраченное
     *   на подготовку страниц извлекаемых из GC для данных пользователя,
     *   включая подкачку с диска. */
    uint32_t work_xtime_cpu;
    /** \brief Количество итераций поиска внутри GC при выделении страниц
     *  ради данных пользователя. */
    uint32_t work_rsteps;
    /** \brief Количество запросов на выделение последовательностей страниц
     *  ради данных пользователя. */
    uint32_t work_xpages;
    /** \brief Количество страничных промахов (page faults) внутри GC
     *  при выделении и подготовки страниц для данных пользователя. */
    uint32_t work_majflt;

    /** \brief Счетчик выполнения по медленному пути (slow path execution count)
     *  GC для целей поддержки и обновления самой GC. */
    uint32_t self_counter;
    /** \brief Время "по настенным часам" затраченное на чтение и поиск внутри
     *  GC для целей поддержки и обновления самой GC. */
    uint32_t self_rtime_monotonic;
    /** \brief Время ЦПУ в режиме пользователе затраченное на подготовку
     *  страниц извлекаемых из GC для целей поддержки и обновления самой GC,
     *  включая подкачку с диска. */
    uint32_t self_xtime_cpu;
    /** \brief Количество итераций поиска внутри GC при выделении страниц
     *  для целей поддержки и обновления самой GC. */
    uint32_t self_rsteps;
    /** \brief Количество запросов на выделение последовательностей страниц
     *  для самой GC. */
    uint32_t self_xpages;
    /** \brief Количество страничных промахов (page faults) внутри GC
     *  при выделении и подготовки страниц для самой GC. */
    uint32_t self_majflt;
  } gc_prof;
};
#ifndef __cplusplus
/** \ingroup c_statinfo */
typedef struct MDBX_commit_latency MDBX_commit_latency;
#endif

/** \brief Commit all the operations of a transaction into the database and
 * collect latency information.
 * \see mdbx_txn_commit()
 * \ingroup c_transactions
 * \warning This function may be changed in future releases. */
LIBMDBX_API int mdbx_txn_commit_ex(MDBX_txn *txn, MDBX_commit_latency *latency);

/** \brief Commit all the operations of a transaction into the database.
 * \ingroup c_transactions
 *
 * If the current thread is not eligible to manage the transaction then
 * the \ref MDBX_THREAD_MISMATCH error will returned. Otherwise the transaction
 * will be committed and its handle is freed. If the transaction cannot
 * be committed, it will be aborted with the corresponding error returned.
 *
 * Thus, a result other than \ref MDBX_THREAD_MISMATCH means that the
 * transaction is terminated:
 *  - Resources are released;
 *  - Transaction handle is invalid;
 *  - Cursor(s) associated with transaction must not be used, except with
 *    mdbx_cursor_renew() and \ref mdbx_cursor_close().
 *    Such cursor(s) must be closed explicitly by \ref mdbx_cursor_close()
 *    before or after transaction commit, either can be reused with
 *    \ref mdbx_cursor_renew() until it will be explicitly closed by
 *    \ref mdbx_cursor_close().
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_RESULT_TRUE      Transaction was aborted since it should
 *                               be aborted due to previous errors.
 * \retval MDBX_PANIC            A fatal error occurred earlier
 *                               and the environment must be shut down.
 * \retval MDBX_BAD_TXN          Transaction is already finished or never began.
 * \retval MDBX_EBADSIGN         Transaction object has invalid signature,
 *                               e.g. transaction was already terminated
 *                               or memory was corrupted.
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL           Transaction handle is NULL.
 * \retval MDBX_ENOSPC           No more disk space.
 * \retval MDBX_EIO              An error occurred during the flushing/writing
 *                               data to a storage medium/disk.
 * \retval MDBX_ENOMEM           Out of memory. */
LIBMDBX_INLINE_API(int, mdbx_txn_commit, (MDBX_txn * txn)) {
  return mdbx_txn_commit_ex(txn, NULL);
}

/** \brief Abandon all the operations of the transaction instead of saving them.
 * \ingroup c_transactions
 *
 * The transaction handle is freed. It and its cursors must not be used again
 * after this call, except with \ref mdbx_cursor_renew() and
 * \ref mdbx_cursor_close().
 *
 * If the current thread is not eligible to manage the transaction then
 * the \ref MDBX_THREAD_MISMATCH error will returned. Otherwise the transaction
 * will be aborted and its handle is freed. Thus, a result other than
 * \ref MDBX_THREAD_MISMATCH means that the transaction is terminated:
 *  - Resources are released;
 *  - Transaction handle is invalid;
 *  - Cursor(s) associated with transaction must not be used, except with
 *    \ref mdbx_cursor_renew() and \ref mdbx_cursor_close().
 *    Such cursor(s) must be closed explicitly by \ref mdbx_cursor_close()
 *    before or after transaction abort, either can be reused with
 *    \ref mdbx_cursor_renew() until it will be explicitly closed by
 *    \ref mdbx_cursor_close().
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_PANIC            A fatal error occurred earlier and
 *                               the environment must be shut down.
 * \retval MDBX_BAD_TXN          Transaction is already finished or never began.
 * \retval MDBX_EBADSIGN         Transaction object has invalid signature,
 *                               e.g. transaction was already terminated
 *                               or memory was corrupted.
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL           Transaction handle is NULL. */
LIBMDBX_API int mdbx_txn_abort(MDBX_txn *txn);

/** \brief Marks transaction as broken.
 * \ingroup c_transactions
 *
 * Function keeps the transaction handle and corresponding locks, but makes
 * impossible to perform any operations within a broken transaction.
 * Broken transaction must then be aborted explicitly later.
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \see mdbx_txn_abort() \see mdbx_txn_reset() \see mdbx_txn_commit()
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_break(MDBX_txn *txn);

/** \brief Reset a read-only transaction.
 * \ingroup c_transactions
 *
 * Abort the read-only transaction like \ref mdbx_txn_abort(), but keep the
 * transaction handle. Therefore \ref mdbx_txn_renew() may reuse the handle.
 * This saves allocation overhead if the process will start a new read-only
 * transaction soon, and also locking overhead if \ref MDBX_NOSTICKYTHREADS is
 * in use. The reader table lock is released, but the table slot stays tied to
 * its thread or \ref MDBX_txn. Use \ref mdbx_txn_abort() to discard a reset
 * handle, and to free its lock table slot if \ref MDBX_NOSTICKYTHREADS
 * is in use.
 *
 * Cursors opened within the transaction must not be used again after this
 * call, except with \ref mdbx_cursor_renew() and \ref mdbx_cursor_close().
 *
 * Reader locks generally don't interfere with writers, but they keep old
 * versions of database pages allocated. Thus they prevent the old pages from
 * being reused when writers commit new data, and so under heavy load the
 * database size may grow much more rapidly than otherwise.
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_PANIC            A fatal error occurred earlier and
 *                               the environment must be shut down.
 * \retval MDBX_BAD_TXN          Transaction is already finished or never began.
 * \retval MDBX_EBADSIGN         Transaction object has invalid signature,
 *                               e.g. transaction was already terminated
 *                               or memory was corrupted.
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL           Transaction handle is NULL. */
LIBMDBX_API int mdbx_txn_reset(MDBX_txn *txn);

/** \brief Переводит читающую транзакцию в "припаркованное" состояние.
 * \ingroup c_transactions
 *
 * Выполняющиеся читающие транзакции не позволяют перерабатывать старые
 * MVCC-снимки данных, начиная с самой старой используемой/читаемой версии и все
 * последующие. Припаркованная же транзакция может быть вытеснена транзакцией
 * записи, если будет мешать переработке мусора (старых MVCC-снимков данных).
 * А если вытеснения не произойдет, то восстановление (перевод в рабочее
 * состояние и продолжение выполнение) читающей транзакции будет существенно
 * дешевле. Таким образом, парковка транзакций позволяет предотвратить
 * негативные последствия связанные с остановкой переработки мусора,
 * одновременно сохранив накладные расходы на минимальном уровне.
 *
 * Для продолжения выполнения (чтения и/или использования данных) припаркованная
 * транзакция должна быть восстановлена посредством \ref mdbx_txn_unpark().
 * Для удобства использования и предотвращения лишних вызовов API, посредством
 * параметра `autounpark`, предусмотрена возможность автоматической
 * «распарковки» при использовании припаркованной транзакции в функциях API
 * предполагающих чтение данных.
 *
 * \warning До восстановления/распарковки транзакции, вне зависимости от
 * аргумента `autounpark`, нельзя допускать разыменования указателей полученных
 * ранее при чтении данных в рамках припаркованной транзакции, так как
 * MVCC-снимок в котором размещены эти данные не удерживается и может
 * переработан в любой момент.
 *
 * Припаркованная транзакция без "распарковки" может быть прервана, сброшена
 * или перезапущена в любой момент посредством \ref mdbx_txn_abort(),
 * \ref mdbx_txn_reset() и \ref mdbx_txn_renew(), соответственно.
 *
 * \see mdbx_txn_unpark()
 * \see mdbx_txn_flags()
 * \see mdbx_env_set_hsr()
 * \see <a href="intro.html#long-lived-read">Long-lived read transactions</a>
 *
 * \param [in] txn          Транзакция чтения запущенная посредством
 *                          \ref mdbx_txn_begin().
 *
 * \param [in] autounpark   Позволяет включить автоматическую
 *                          распарковку/восстановление транзакции при вызове
 *                          функций API предполагающих чтение данных.
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении. */
LIBMDBX_API int mdbx_txn_park(MDBX_txn *txn, bool autounpark);

/** \brief Распарковывает ранее припаркованную читающую транзакцию.
 * \ingroup c_transactions
 *
 * Функция пытается восстановить ранее припаркованную транзакцию. Если
 * припаркованная транзакция была вытеснена ради переработки старых
 * MVCC-снимков, то в зависимости от аргумента `restart_if_ousted` выполняется
 * её перезапуск аналогично \ref mdbx_txn_renew(), либо транзакция сбрасывается
 * и возвращается код ошибки \ref MDBX_OUSTED.
 *
 * \see mdbx_txn_park()
 * \see mdbx_txn_flags()
 * \see <a href="intro.html#long-lived-read">Long-lived read transactions</a>
 *
 * \param [in] txn     Транзакция чтения запущенная посредством
 *                     \ref mdbx_txn_begin() и затем припаркованная
 *                     посредством \ref mdbx_txn_park.
 *
 * \param [in] restart_if_ousted   Позволяет сразу выполнить перезапуск
 *                                 транзакции, если она была вынестена.
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении.
 * Некоторые специфичекие коды результата:
 *
 * \retval MDBX_SUCCESS      Припаркованная транзакция успешно восстановлена,
 *                           либо она не была припаркована.
 *
 * \retval MDBX_OUSTED       Читающая транзакция была вытеснена пишущей
 *                           транзакцией ради переработки старых MVCC-снимков,
 *                           а аргумент `restart_if_ousted` был задан `false`.
 *                           Транзакция сбрасывается в состояние аналогичное
 *                           после вызова \ref mdbx_txn_reset(), но экземпляр
 *                           (хендл) не освобождается и может быть использован
 *                           повторно посредством \ref mdbx_txn_renew(), либо
 *                           освобожден посредством \ref mdbx_txn_abort().
 *
 * \retval MDBX_RESULT_TRUE  Читающая транзакция была вынеснена, но теперь
 *                           перезапущена для чтения другого (последнего)
 *                           MVCC-снимка, так как restart_if_ousted` был задан
 *                           `true`.
 *
 * \retval MDBX_BAD_TXN      Транзакция уже завершена, либо не была запущена. */
LIBMDBX_API int mdbx_txn_unpark(MDBX_txn *txn, bool restart_if_ousted);

/** \brief Renew a read-only transaction.
 * \ingroup c_transactions
 *
 * This acquires a new reader lock for a transaction handle that had been
 * released by \ref mdbx_txn_reset(). It must be called before a reset
 * transaction may be used again.
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_PANIC            A fatal error occurred earlier and
 *                               the environment must be shut down.
 * \retval MDBX_BAD_TXN          Transaction is already finished or never began.
 * \retval MDBX_EBADSIGN         Transaction object has invalid signature,
 *                               e.g. transaction was already terminated
 *                               or memory was corrupted.
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL           Transaction handle is NULL. */
LIBMDBX_API int mdbx_txn_renew(MDBX_txn *txn);

/** \brief The fours integers markers (aka "canary") associated with the
 * environment.
 * \ingroup c_crud
 * \see mdbx_canary_put()
 * \see mdbx_canary_get()
 *
 * The `x`, `y` and `z` values could be set by \ref mdbx_canary_put(), while the
 * 'v' will be always set to the transaction number. Updated values becomes
 * visible outside the current transaction only after it was committed. Current
 * values could be retrieved by \ref mdbx_canary_get(). */
struct MDBX_canary {
  uint64_t x, y, z, v;
};
#ifndef __cplusplus
/** \ingroup c_crud */
typedef struct MDBX_canary MDBX_canary;
#endif

/** \brief Set integers markers (aka "canary") associated with the environment.
 * \ingroup c_crud
 * \see mdbx_canary_get()
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin()
 * \param [in] canary  A optional pointer to \ref MDBX_canary structure for `x`,
 *              `y` and `z` values from.
 *            - If canary is NOT NULL then the `x`, `y` and `z` values will be
 *              updated from given canary argument, but the 'v' be always set
 *              to the current transaction number if at least one `x`, `y` or
 *              `z` values have changed (i.e. if `x`, `y` and `z` have the same
 *              values as currently present then nothing will be changes or
 *              updated).
 *            - if canary is NULL then the `v` value will be explicitly update
 *              to the current transaction number without changes `x`, `y` nor
 *              `z`.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_canary_put(MDBX_txn *txn, const MDBX_canary *canary);

/** \brief Returns fours integers markers (aka "canary") associated with the
 * environment.
 * \ingroup c_crud
 * \see mdbx_canary_put()
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] canary  The address of an \ref MDBX_canary structure where the
 *                     information will be copied.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_canary_get(const MDBX_txn *txn, MDBX_canary *canary);

/** \brief A callback function used to compare two keys in a table
 * \ingroup c_crud
 * \see mdbx_cmp() \see mdbx_get_keycmp()
 * \see mdbx_get_datacmp \see mdbx_dcmp()
 *
 * \anchor avoid_custom_comparators
 * \deprecated It is recommend not using custom comparison functions, but
 * instead converting the keys to one of the forms that are suitable for
 * built-in comparators (for instance take look to the \ref value2key).
 * The reasons to not using custom comparators are:
 *   - The order of records could not be validated without your code.
 *     So `mdbx_chk` utility will reports "wrong order" errors
 *     and the `-i` option is required to suppress ones.
 *   - A records could not be ordered or sorted without your code.
 *     So `mdbx_load` utility should be used with `-a` option to preserve
 *     input data order.
 *   - However, the custom comparators feature will never be removed.
 *     You have been warned but still can use custom comparators knowing
 *     about the issues noted above. In this case you should ignore `deprecated`
 *     warnings or define `MDBX_DEPRECATED` macro to empty to avoid ones. */
typedef int(MDBX_cmp_func)(const MDBX_val *a,
                           const MDBX_val *b) MDBX_CXX17_NOEXCEPT;

/** \brief Open or Create a named table in the environment.
 * \ingroup c_dbi
 *
 * A table handle denotes the name and parameters of a table,
 * independently of whether such a table exists. The table handle may be
 * discarded by calling \ref mdbx_dbi_close(). The old table handle is
 * returned if the table was already open. The handle may only be closed
 * once.
 *
 * \note A notable difference between MDBX and LMDB is that MDBX make handles
 * opened for existing tables immediately available for other transactions,
 * regardless this transaction will be aborted or reset. The REASON for this is
 * to avoiding the requirement for multiple opening a same handles in
 * concurrent read transactions, and tracking of such open but hidden handles
 * until the completion of read transactions which opened them.
 *
 * Nevertheless, the handle for the NEWLY CREATED table will be invisible
 * for other transactions until the this write transaction is successfully
 * committed. If the write transaction is aborted the handle will be closed
 * automatically. After a successful commit the such handle will reside in the
 * shared environment, and may be used by other transactions.
 *
 * In contrast to LMDB, the MDBX allow this function to be called from multiple
 * concurrent transactions or threads in the same process.
 *
 * To use named table (with name != NULL), \ref mdbx_env_set_maxdbs()
 * must be called before opening the environment. Table names are
 * keys in the internal unnamed table, and may be read but not written.
 *
 * \param [in] txn    transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] name   The name of the table to open. If only a single
 *                    table is needed in the environment,
 *                    this value may be NULL.
 * \param [in] flags  Special options for this table. This parameter must
 *                    be bitwise OR'ing together any of the constants
 *                    described here:
 *
 *  - \ref MDBX_DB_DEFAULTS
 *      Keys are arbitrary byte strings and compared from beginning to end.
 *  - \ref MDBX_REVERSEKEY
 *      Keys are arbitrary byte strings to be compared in reverse order,
 *      from the end of the strings to the beginning.
 *  - \ref MDBX_INTEGERKEY
 *      Keys are binary integers in native byte order, either uint32_t or
 *      uint64_t, and will be sorted as such. The keys must all be of the
 *      same size and must be aligned while passing as arguments.
 *  - \ref MDBX_DUPSORT
 *      Duplicate keys may be used in the table. Or, from another point of
 *      view, keys may have multiple data items, stored in sorted order. By
 *      default keys must be unique and may have only a single data item.
 *  - \ref MDBX_DUPFIXED
 *      This flag may only be used in combination with \ref MDBX_DUPSORT. This
 *      option tells the library that the data items for this table are
 *      all the same size, which allows further optimizations in storage and
 *      retrieval. When all data items are the same size, the
 *      \ref MDBX_GET_MULTIPLE, \ref MDBX_NEXT_MULTIPLE and
 *      \ref MDBX_PREV_MULTIPLE cursor operations may be used to retrieve
 *      multiple items at once.
 *  - \ref MDBX_INTEGERDUP
 *      This option specifies that duplicate data items are binary integers,
 *      similar to \ref MDBX_INTEGERKEY keys. The data values must all be of the
 *      same size and must be aligned while passing as arguments.
 *  - \ref MDBX_REVERSEDUP
 *      This option specifies that duplicate data items should be compared as
 *      strings in reverse order (the comparison is performed in the direction
 *      from the last byte to the first).
 *  - \ref MDBX_CREATE
 *      Create the named table if it doesn't exist. This option is not
 *      allowed in a read-only transaction or a read-only environment.
 *
 * \param [out] dbi     Address where the new \ref MDBX_dbi handle
 *                      will be stored.
 *
 * For \ref mdbx_dbi_open_ex() additional arguments allow you to set custom
 * comparison functions for keys and values (for multimaps).
 * \see avoid_custom_comparators
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_NOTFOUND   The specified table doesn't exist in the
 *                         environment and \ref MDBX_CREATE was not specified.
 * \retval MDBX_DBS_FULL   Too many tables have been opened.
 *                         \see mdbx_env_set_maxdbs()
 * \retval MDBX_INCOMPATIBLE  Table is incompatible with given flags,
 *                         i.e. the passed flags is different with which the
 *                         table was created, or the table was already
 *                         opened with a different comparison function(s).
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread. */
LIBMDBX_API int mdbx_dbi_open(MDBX_txn *txn, const char *name,
                              MDBX_db_flags_t flags, MDBX_dbi *dbi);
/** \copydoc mdbx_dbi_open()
 * \ingroup c_dbi */
LIBMDBX_API int mdbx_dbi_open2(MDBX_txn *txn, const MDBX_val *name,
                               MDBX_db_flags_t flags, MDBX_dbi *dbi);

/** \brief Open or Create a named table in the environment
 * with using custom comparison functions.
 * \ingroup c_dbi
 *
 * \deprecated Please \ref avoid_custom_comparators
 * "avoid using custom comparators" and use \ref mdbx_dbi_open() instead.
 *
 * \param [in] txn    transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] name   The name of the table to open. If only a single
 *                    table is needed in the environment,
 *                    this value may be NULL.
 * \param [in] flags  Special options for this table.
 * \param [in] keycmp  Optional custom key comparison function for a table.
 * \param [in] datacmp Optional custom data comparison function for a table.
 * \param [out] dbi    Address where the new MDBX_dbi handle will be stored.
 * \returns A non-zero error value on failure and 0 on success. */
MDBX_DEPRECATED LIBMDBX_API int
mdbx_dbi_open_ex(MDBX_txn *txn, const char *name, MDBX_db_flags_t flags,
                 MDBX_dbi *dbi, MDBX_cmp_func *keycmp, MDBX_cmp_func *datacmp);
/** \copydoc mdbx_dbi_open_ex()
 * \ingroup c_dbi */
MDBX_DEPRECATED LIBMDBX_API int
mdbx_dbi_open_ex2(MDBX_txn *txn, const MDBX_val *name, MDBX_db_flags_t flags,
                  MDBX_dbi *dbi, MDBX_cmp_func *keycmp, MDBX_cmp_func *datacmp);

/** \brief Переименовает таблицу по DBI-дескриптору
 *
 * \ingroup c_dbi
 *
 * Переименовывает пользовательскую именованную таблицу связанную с передаваемым
 * DBI-дескриптором.
 *
 * \param [in,out] txn   Пишущая транзакция запущенная посредством
 *                       \ref mdbx_txn_begin().
 * \param [in]     dbi   Дескриптор таблицы
 *                       открытый посредством \ref mdbx_dbi_open().
 *
 * \param [in]     name  Новое имя для переименования.
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении. */
LIBMDBX_API int mdbx_dbi_rename(MDBX_txn *txn, MDBX_dbi dbi, const char *name);
/** \copydoc mdbx_dbi_rename()
 * \ingroup c_dbi */
LIBMDBX_API int mdbx_dbi_rename2(MDBX_txn *txn, MDBX_dbi dbi,
                                 const MDBX_val *name);

/** \brief Функция обратного вызова для перечисления
 *  пользовательских именованных таблиц.
 *
 * \ingroup c_statinfo
 * \see mdbx_enumerate_tables()
 *
 * \param [in] ctx       Указатель на контекст переданный аналогичным
 *                       параметром в \ref mdbx_enumerate_tables().
 * \param [in] txn       Транзазакция.
 * \param [in] name      Имя таблицы.
 * \param [in] flags     Флаги \ref MDBX_db_flags_t.
 * \param [in] stat      Базовая информация \ref MDBX_stat о таблице.
 * \param [in] dbi       Отличное от 0 значение DBI-дескриптора,
 *                       если таковой был открыт для этой таблицы.
 *                       Либо 0 если такого открытого дескриптора нет.
 *
 * \returns Ноль при успехе и продолжении перечисления, при возвращении другого
 *          значения оно будет немедленно возвращено вызывающему
 *          без продолжения перечисления. */
typedef int(MDBX_table_enum_func)(void *ctx, const MDBX_txn *txn,
                                  const MDBX_val *name, MDBX_db_flags_t flags,
                                  const struct MDBX_stat *stat,
                                  MDBX_dbi dbi) MDBX_CXX17_NOEXCEPT;

/** \brief Перечисляет пользовательские именнованные таблицы.
 *
 * Производит перечисление пользовательских именнованных таблиц, вызывая
 * специфицируемую пользователем функцию-визитер для каждой именованной таблицы.
 * Перечисление продолжается до исчерпания именованных таблиц, либо до возврата
 * отличного от нуля результата из заданной пользователем функции, которое будет
 * сразу возвращено в качестве результата.
 *
 * \ingroup c_statinfo
 * \see MDBX_table_enum_func
 *
 * \param [in] txn     Транзакция запущенная посредством
 *                     \ref mdbx_txn_begin().
 * \param [in] func    Указатель на пользовательскую функцию
 *                     с сигнатурой \ref MDBX_table_enum_func,
 *                     которая будет вызвана для каждой таблицы.
 * \param [in] ctx     Указатель на некоторый контект, который будет передан
 *                     в функцию `func()` как есть.
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении. */
LIBMDBX_API int mdbx_enumerate_tables(const MDBX_txn *txn,
                                      MDBX_table_enum_func *func, void *ctx);

/** \defgroup value2key Value-to-Key functions
 * \brief Value-to-Key functions to
 * \ref avoid_custom_comparators "avoid using custom comparators"
 * \see key2value
 * @{
 *
 * The \ref mdbx_key_from_jsonInteger() build a keys which are comparable with
 * keys created by \ref mdbx_key_from_double(). So this allows mixing `int64_t`
 * and IEEE754 double values in one index for JSON-numbers with restriction for
 * integer numbers range corresponding to RFC-7159, i.e. \f$[-2^{53}+1,
 * 2^{53}-1]\f$. See bottom of page 6 at https://tools.ietf.org/html/rfc7159 */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API uint64_t
mdbx_key_from_jsonInteger(const int64_t json_integer);

MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API uint64_t
mdbx_key_from_double(const double ieee754_64bit);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API uint64_t
mdbx_key_from_ptrdouble(const double *const ieee754_64bit);

MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API uint32_t
mdbx_key_from_float(const float ieee754_32bit);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API uint32_t
mdbx_key_from_ptrfloat(const float *const ieee754_32bit);

MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_INLINE_API(uint64_t, mdbx_key_from_int64,
                                               (const int64_t i64)) {
  return UINT64_C(0x8000000000000000) + i64;
}

MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_INLINE_API(uint32_t, mdbx_key_from_int32,
                                               (const int32_t i32)) {
  return UINT32_C(0x80000000) + i32;
}
/** end of value2key @} */

/** \defgroup key2value Key-to-Value functions
 * \brief Key-to-Value functions to
 * \ref avoid_custom_comparators "avoid using custom comparators"
 * \see value2key
 * @{ */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int64_t
mdbx_jsonInteger_from_key(const MDBX_val);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API double
mdbx_double_from_key(const MDBX_val);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API float
mdbx_float_from_key(const MDBX_val);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int32_t
mdbx_int32_from_key(const MDBX_val);

MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int64_t
mdbx_int64_from_key(const MDBX_val);
/** end of value2key @} */

/** \brief Retrieve statistics for a table.
 * \ingroup c_statinfo
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi     A table handle returned by \ref mdbx_dbi_open().
 * \param [out] stat   The address of an \ref MDBX_stat structure where
 *                     the statistics will be copied.
 * \param [in] bytes   The size of \ref MDBX_stat.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_API int mdbx_dbi_stat(const MDBX_txn *txn, MDBX_dbi dbi,
                              MDBX_stat *stat, size_t bytes);

/** \brief Retrieve depth (bitmask) information of nested dupsort (multi-value)
 * B+trees for given table.
 * \ingroup c_statinfo
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi     A table handle returned by \ref mdbx_dbi_open().
 * \param [out] mask   The address of an uint32_t value where the bitmask
 *                     will be stored.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL       An invalid parameter was specified.
 * \retval MDBX_RESULT_TRUE  The dbi isn't a dupsort (multi-value) table. */
LIBMDBX_API int mdbx_dbi_dupsort_depthmask(const MDBX_txn *txn, MDBX_dbi dbi,
                                           uint32_t *mask);

/** \brief DBI state bits returted by \ref mdbx_dbi_flags_ex()
 * \ingroup c_statinfo
 * \see mdbx_dbi_flags_ex() */
typedef enum MDBX_dbi_state {
  /** DB was written in this txn */
  MDBX_DBI_DIRTY = 0x01,
  /** Cached Named-DB record is older than txnID */
  MDBX_DBI_STALE = 0x02,
  /** Named-DB handle opened in this txn */
  MDBX_DBI_FRESH = 0x04,
  /** Named-DB handle created in this txn */
  MDBX_DBI_CREAT = 0x08,
} MDBX_dbi_state_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_dbi_state)

/** \brief Retrieve the DB flags and status for a table handle.
 * \ingroup c_statinfo
 * \see MDBX_db_flags_t
 * \see MDBX_dbi_state_t
 *
 * \param [in] txn     A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi     A table handle returned by \ref mdbx_dbi_open().
 * \param [out] flags  Address where the flags will be returned.
 * \param [out] state  Address where the state will be returned.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_dbi_flags_ex(const MDBX_txn *txn, MDBX_dbi dbi,
                                  unsigned *flags, unsigned *state);
/** \brief The shortcut to calling \ref mdbx_dbi_flags_ex() with `state=NULL`
 * for discarding it result.
 * \ingroup c_statinfo
 * \see MDBX_db_flags_t */
LIBMDBX_INLINE_API(int, mdbx_dbi_flags,
                   (const MDBX_txn *txn, MDBX_dbi dbi, unsigned *flags)) {
  unsigned state;
  return mdbx_dbi_flags_ex(txn, dbi, flags, &state);
}

/** \brief Close a table handle. Normally unnecessary.
 * \ingroup c_dbi
 *
 * Closing a table handle is not necessary, but lets \ref mdbx_dbi_open()
 * reuse the handle value. Usually it's better to set a bigger
 * \ref mdbx_env_set_maxdbs(), unless that value would be large.
 *
 * \note Use with care.
 * This call is synchronized via mutex with \ref mdbx_dbi_open(), but NOT with
 * any transaction(s) running by other thread(s).
 * So the `mdbx_dbi_close()` MUST NOT be called in-parallel/concurrently
 * with any transactions using the closing dbi-handle, nor during other thread
 * commit/abort a write transacton(s). The "next" version of libmdbx (\ref
 * MithrilDB) will solve this issue.
 *
 * Handles should only be closed if no other threads are going to reference
 * the table handle or one of its cursors any further. Do not close a handle
 * if an existing transaction has modified its table. Doing so can cause
 * misbehavior from table corruption to errors like \ref MDBX_BAD_DBI
 * (since the DB name is gone).
 *
 * \param [in] env  An environment handle returned by \ref mdbx_env_create().
 * \param [in] dbi  A table handle returned by \ref mdbx_dbi_open().
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_dbi_close(MDBX_env *env, MDBX_dbi dbi);

/** \brief Empty or delete and close a table.
 * \ingroup c_crud
 *
 * \see mdbx_dbi_close() \see mdbx_dbi_open()
 *
 * \param [in] txn  A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi  A table handle returned by \ref mdbx_dbi_open().
 * \param [in] del  `false` to empty the DB, `true` to delete it
 *                  from the environment and close the DB handle.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_drop(MDBX_txn *txn, MDBX_dbi dbi, bool del);

/** \brief Get items from a table.
 * \ingroup c_crud
 *
 * This function retrieves key/data pairs from the table. The address
 * and length of the data associated with the specified key are returned
 * in the structure to which data refers.
 * If the table supports duplicate keys (\ref MDBX_DUPSORT) then the
 * first data item for the key will be returned. Retrieval of other
 * items requires the use of \ref mdbx_cursor_get().
 *
 * \note The memory pointed to by the returned values is owned by the
 * table. The caller MUST not dispose of the memory, and MUST not modify it
 * in any way regardless in a read-only nor read-write transactions!
 * For case a table opened without the \ref MDBX_WRITEMAP modification
 * attempts likely will cause a `SIGSEGV`. However, when a table opened with
 * the \ref MDBX_WRITEMAP or in case values returned inside read-write
 * transaction are located on a "dirty" (modified and pending to commit) pages,
 * such modification will silently accepted and likely will lead to DB and/or
 * data corruption.
 *
 * \note Values returned from the table are valid only until a
 * subsequent update operation, or the end of the transaction.
 *
 * \param [in] txn       A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi       A table handle returned by \ref mdbx_dbi_open().
 * \param [in] key       The key to search for in the table.
 * \param [in,out] data  The data corresponding to the key.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_NOTFOUND  The key was not in the table.
 * \retval MDBX_EINVAL    An invalid parameter was specified. */
LIBMDBX_API int mdbx_get(const MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *key,
                         MDBX_val *data);

/** \brief Get items from a table
 * and optionally number of data items for a given key.
 *
 * \ingroup c_crud
 *
 * Briefly this function does the same as \ref mdbx_get() with a few
 * differences:
 *  1. If values_count is NOT NULL, then returns the count
 *     of multi-values/duplicates for a given key.
 *  2. Updates BOTH the key and the data for pointing to the actual key-value
 *     pair inside the table.
 *
 * \param [in] txn           A transaction handle returned
 *                           by \ref mdbx_txn_begin().
 * \param [in] dbi           A table handle returned by \ref mdbx_dbi_open().
 * \param [in,out] key       The key to search for in the table.
 * \param [in,out] data      The data corresponding to the key.
 * \param [out] values_count The optional address to return number of values
 *                           associated with given key:
 *                            = 0 - in case \ref MDBX_NOTFOUND error;
 *                            = 1 - exactly for tables
 *                                  WITHOUT \ref MDBX_DUPSORT;
 *                            >= 1 for tables WITH \ref MDBX_DUPSORT.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_NOTFOUND  The key was not in the table.
 * \retval MDBX_EINVAL    An invalid parameter was specified. */
LIBMDBX_API int mdbx_get_ex(const MDBX_txn *txn, MDBX_dbi dbi, MDBX_val *key,
                            MDBX_val *data, size_t *values_count);

/** \brief Get equal or great item from a table.
 * \ingroup c_crud
 *
 * Briefly this function does the same as \ref mdbx_get() with a few
 * differences:
 * 1. Return equal or great (due comparison function) key-value
 *    pair, but not only exactly matching with the key.
 * 2. On success return \ref MDBX_SUCCESS if key found exactly,
 *    and \ref MDBX_RESULT_TRUE otherwise. Moreover, for tables with
 *    \ref MDBX_DUPSORT flag the data argument also will be used to match over
 *    multi-value/duplicates, and \ref MDBX_SUCCESS will be returned only when
 *    BOTH the key and the data match exactly.
 * 3. Updates BOTH the key and the data for pointing to the actual key-value
 *    pair inside the table.
 *
 * \param [in] txn           A transaction handle returned
 *                           by \ref mdbx_txn_begin().
 * \param [in] dbi           A table handle returned by \ref mdbx_dbi_open().
 * \param [in,out] key       The key to search for in the table.
 * \param [in,out] data      The data corresponding to the key.
 *
 * \returns A non-zero error value on failure and \ref MDBX_RESULT_FALSE
 *          or \ref MDBX_RESULT_TRUE on success (as described above).
 *          Some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_NOTFOUND      The key was not in the table.
 * \retval MDBX_EINVAL        An invalid parameter was specified. */
LIBMDBX_API int mdbx_get_equal_or_great(const MDBX_txn *txn, MDBX_dbi dbi,
                                        MDBX_val *key, MDBX_val *data);

/** \brief Store items into a table.
 * \ingroup c_crud
 *
 * This function stores key/data pairs in the table. The default behavior
 * is to enter the new key/data pair, replacing any previously existing key
 * if duplicates are disallowed, or adding a duplicate data item if
 * duplicates are allowed (see \ref MDBX_DUPSORT).
 *
 * \param [in] txn        A transaction handle returned
 *                        by \ref mdbx_txn_begin().
 * \param [in] dbi        A table handle returned by \ref mdbx_dbi_open().
 * \param [in] key        The key to store in the table.
 * \param [in,out] data   The data to store.
 * \param [in] flags      Special options for this operation.
 *                        This parameter must be set to 0 or by bitwise OR'ing
 *                        together one or more of the values described here:
 *   - \ref MDBX_NODUPDATA
 *      Enter the new key-value pair only if it does not already appear
 *      in the table. This flag may only be specified if the table
 *      was opened with \ref MDBX_DUPSORT. The function will return
 *      \ref MDBX_KEYEXIST if the key/data pair already appears in the table.
 *
 *  - \ref MDBX_NOOVERWRITE
 *      Enter the new key/data pair only if the key does not already appear
 *      in the table. The function will return \ref MDBX_KEYEXIST if the key
 *      already appears in the table, even if the table supports
 *      duplicates (see \ref  MDBX_DUPSORT). The data parameter will be set
 *      to point to the existing item.
 *
 *  - \ref MDBX_CURRENT
 *      Update an single existing entry, but not add new ones. The function will
 *      return \ref MDBX_NOTFOUND if the given key not exist in the table.
 *      In case multi-values for the given key, with combination of
 *      the \ref MDBX_ALLDUPS will replace all multi-values,
 *      otherwise return the \ref MDBX_EMULTIVAL.
 *
 *  - \ref MDBX_RESERVE
 *      Reserve space for data of the given size, but don't copy the given
 *      data. Instead, return a pointer to the reserved space, which the
 *      caller can fill in later - before the next update operation or the
 *      transaction ends. This saves an extra memcpy if the data is being
 *      generated later. MDBX does nothing else with this memory, the caller
 *      is expected to modify all of the space requested. This flag must not
 *      be specified if the table was opened with \ref MDBX_DUPSORT.
 *
 *  - \ref MDBX_APPEND
 *      Append the given key/data pair to the end of the table. This option
 *      allows fast bulk loading when keys are already known to be in the
 *      correct order. Loading unsorted keys with this flag will cause
 *      a \ref MDBX_EKEYMISMATCH error.
 *
 *  - \ref MDBX_APPENDDUP
 *      As above, but for sorted dup data.
 *
 *  - \ref MDBX_MULTIPLE
 *      Store multiple contiguous data elements in a single request. This flag
 *      may only be specified if the table was opened with
 *      \ref MDBX_DUPFIXED. With combination the \ref MDBX_ALLDUPS
 *      will replace all multi-values.
 *      The data argument must be an array of two \ref MDBX_val. The `iov_len`
 *      of the first \ref MDBX_val must be the size of a single data element.
 *      The `iov_base` of the first \ref MDBX_val must point to the beginning
 *      of the array of contiguous data elements which must be properly aligned
 *      in case of table with \ref MDBX_INTEGERDUP flag.
 *      The `iov_len` of the second \ref MDBX_val must be the count of the
 *      number of data elements to store. On return this field will be set to
 *      the count of the number of elements actually written. The `iov_base` of
 *      the second \ref MDBX_val is unused.
 *
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_KEYEXIST  The key/value pair already exists in the table.
 * \retval MDBX_MAP_FULL  The database is full, see \ref mdbx_env_set_mapsize().
 * \retval MDBX_TXN_FULL  The transaction has too many dirty pages.
 * \retval MDBX_EACCES    An attempt was made to write
 *                        in a read-only transaction.
 * \retval MDBX_EINVAL    An invalid parameter was specified. */
LIBMDBX_API int mdbx_put(MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *key,
                         MDBX_val *data, MDBX_put_flags_t flags);

/** \brief Replace items in a table.
 * \ingroup c_crud
 *
 * This function allows to update or delete an existing value at the same time
 * as the previous value is retrieved. If the argument new_data equal is NULL
 * zero, the removal is performed, otherwise the update/insert.
 *
 * The current value may be in an already changed (aka dirty) page. In this
 * case, the page will be overwritten during the update, and the old value will
 * be lost. Therefore, an additional buffer must be passed via old_data
 * argument initially to copy the old value. If the buffer passed in is too
 * small, the function will return \ref MDBX_RESULT_TRUE by setting iov_len
 * field pointed by old_data argument to the appropriate value, without
 * performing any changes.
 *
 * For tables with non-unique keys (i.e. with \ref MDBX_DUPSORT flag),
 * another use case is also possible, when by old_data argument selects a
 * specific item from multi-value/duplicates with the same key for deletion or
 * update. To select this scenario in flags should simultaneously specify
 * \ref MDBX_CURRENT and \ref MDBX_NOOVERWRITE. This combination is chosen
 * because it makes no sense, and thus allows you to identify the request of
 * such a scenario.
 *
 * \param [in] txn           A transaction handle returned
 *                           by \ref mdbx_txn_begin().
 * \param [in] dbi           A table handle returned by \ref mdbx_dbi_open().
 * \param [in] key           The key to store in the table.
 * \param [in] new_data      The data to store, if NULL then deletion will
 *                           be performed.
 * \param [in,out] old_data  The buffer for retrieve previous value as describe
 *                           above.
 * \param [in] flags         Special options for this operation.
 *                           This parameter must be set to 0 or by bitwise
 *                           OR'ing together one or more of the values
 *                           described in \ref mdbx_put() description above,
 *                           and additionally
 *                           (\ref MDBX_CURRENT | \ref MDBX_NOOVERWRITE)
 *                           combination for selection particular item from
 *                           multi-value/duplicates.
 *
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_replace(MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *key,
                             MDBX_val *new_data, MDBX_val *old_data,
                             MDBX_put_flags_t flags);

typedef int (*MDBX_preserve_func)(void *context, MDBX_val *target,
                                  const void *src, size_t bytes);
LIBMDBX_API int mdbx_replace_ex(MDBX_txn *txn, MDBX_dbi dbi,
                                const MDBX_val *key, MDBX_val *new_data,
                                MDBX_val *old_data, MDBX_put_flags_t flags,
                                MDBX_preserve_func preserver,
                                void *preserver_context);

/** \brief Delete items from a table.
 * \ingroup c_crud
 *
 * This function removes key/data pairs from the table.
 *
 * \note The data parameter is NOT ignored regardless the table does
 * support sorted duplicate data items or not. If the data parameter
 * is non-NULL only the matching data item will be deleted. Otherwise, if data
 * parameter is NULL, any/all value(s) for specified key will be deleted.
 *
 * This function will return \ref MDBX_NOTFOUND if the specified key/data
 * pair is not in the table.
 *
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 *
 * \param [in] txn   A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi   A table handle returned by \ref mdbx_dbi_open().
 * \param [in] key   The key to delete from the table.
 * \param [in] data  The data to delete.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_EACCES   An attempt was made to write
 *                       in a read-only transaction.
 * \retval MDBX_EINVAL   An invalid parameter was specified. */
LIBMDBX_API int mdbx_del(MDBX_txn *txn, MDBX_dbi dbi, const MDBX_val *key,
                         const MDBX_val *data);

/** \brief Create a cursor handle but not bind it to transaction nor DBI-handle.
 * \ingroup c_cursors
 *
 * A cursor cannot be used when its table handle is closed. Nor when its
 * transaction has ended, except with \ref mdbx_cursor_bind() and \ref
 * mdbx_cursor_renew(). Also it can be discarded with \ref mdbx_cursor_close().
 *
 * A cursor must be closed explicitly always, before or after its transaction
 * ends. It can be reused with \ref mdbx_cursor_bind()
 * or \ref mdbx_cursor_renew() before finally closing it.
 *
 * \note In contrast to LMDB, the MDBX required that any opened cursors can be
 * reused and must be freed explicitly, regardless ones was opened in a
 * read-only or write transaction. The REASON for this is eliminates ambiguity
 * which helps to avoid errors such as: use-after-free, double-free, i.e.
 * memory corruption and segfaults.
 *
 * \param [in] context A pointer to application context to be associated with
 *                     created cursor and could be retrieved by
 *                     \ref mdbx_cursor_get_userctx() until cursor closed.
 *
 * \returns Created cursor handle or NULL in case out of memory. */
LIBMDBX_API MDBX_cursor *mdbx_cursor_create(void *context);

/** \brief Set application information associated with the cursor.
 * \ingroup c_cursors
 * \see mdbx_cursor_get_userctx()
 *
 * \param [in] cursor  An cursor handle returned by \ref mdbx_cursor_create()
 *                     or \ref mdbx_cursor_open().
 * \param [in] ctx     An arbitrary pointer for whatever the application needs.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_cursor_set_userctx(MDBX_cursor *cursor, void *ctx);

/** \brief Get the application information associated with the MDBX_cursor.
 * \ingroup c_cursors
 * \see mdbx_cursor_set_userctx()
 *
 * \param [in] cursor  An cursor handle returned by \ref mdbx_cursor_create()
 *                     or \ref mdbx_cursor_open().
 * \returns The pointer which was passed via the `context` parameter
 *          of `mdbx_cursor_create()` or set by \ref mdbx_cursor_set_userctx(),
 *          or `NULL` if something wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API void *
mdbx_cursor_get_userctx(const MDBX_cursor *cursor);

/** \brief Bind cursor to specified transaction and DBI-handle.
 * \ingroup c_cursors
 *
 * Using of the `mdbx_cursor_bind()` is equivalent to calling
 * \ref mdbx_cursor_renew() but with specifying an arbitrary DBI-handle.
 *
 * A cursor may be associated with a new transaction, and referencing a new or
 * the same table handle as it was created with. This may be done whether the
 * previous transaction is live or dead.
 *
 * \note In contrast to LMDB, the MDBX required that any opened cursors can be
 * reused and must be freed explicitly, regardless ones was opened in a
 * read-only or write transaction. The REASON for this is eliminates ambiguity
 * which helps to avoid errors such as: use-after-free, double-free, i.e.
 * memory corruption and segfaults.
 *
 * \param [in] txn      A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi      A table handle returned by \ref mdbx_dbi_open().
 * \param [in] cursor   A cursor handle returned by \ref mdbx_cursor_create().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL  An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_bind(const MDBX_txn *txn, MDBX_cursor *cursor,
                                 MDBX_dbi dbi);

/** \brief Unbind cursor from a transaction.
 * \ingroup c_cursors
 *
 * Unbinded cursor is disassociated with any transactions but still holds
 * the original DBI-handle internally. Thus it could be renewed with any running
 * transaction or closed.
 *
 * \see mdbx_cursor_renew()
 * \see mdbx_cursor_bind()
 * \see mdbx_cursor_close()
 * \see mdbx_cursor_reset()
 *
 * \note In contrast to LMDB, the MDBX required that any opened cursors can be
 * reused and must be freed explicitly, regardless ones was opened in a
 * read-only or write transaction. The REASON for this is eliminates ambiguity
 * which helps to avoid errors such as: use-after-free, double-free, i.e.
 * memory corruption and segfaults.
 *
 * \param [in] cursor   A cursor handle returned by \ref mdbx_cursor_open().
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_cursor_unbind(MDBX_cursor *cursor);

/** \brief Сбрасывает состояние курсора.
 * \ingroup c_cursors
 *
 * В результате сброса курсор становится неустановленным и не позволяет
 * выполнять операции относительного позиционирования, получения или изменения
 * данных, до установки на позицию не зависящую от текущей. Что позволяет
 * приложению пресекать дальнейшие операции без предварительного
 * позиционирования курсора.
 *
 * \param [in] cursor   Указатель на курсор.
 *
 * \returns Результат операции сканирования, либо код ошибки. */
LIBMDBX_API int mdbx_cursor_reset(MDBX_cursor *cursor);

/** \brief Create a cursor handle for the specified transaction and DBI handle.
 * \ingroup c_cursors
 *
 * Using of the `mdbx_cursor_open()` is equivalent to calling
 * \ref mdbx_cursor_create() and then \ref mdbx_cursor_bind() functions.
 *
 * A cursor cannot be used when its table handle is closed. Nor when its
 * transaction has ended, except with \ref mdbx_cursor_bind() and \ref
 * mdbx_cursor_renew(). Also it can be discarded with \ref mdbx_cursor_close().
 *
 * A cursor must be closed explicitly always, before or after its transaction
 * ends. It can be reused with \ref mdbx_cursor_bind()
 * or \ref mdbx_cursor_renew() before finally closing it.
 *
 * \note In contrast to LMDB, the MDBX required that any opened cursors can be
 * reused and must be freed explicitly, regardless ones was opened in a
 * read-only or write transaction. The REASON for this is eliminates ambiguity
 * which helps to avoid errors such as: use-after-free, double-free, i.e.
 * memory corruption and segfaults.
 *
 * \param [in] txn      A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi      A table handle returned by \ref mdbx_dbi_open().
 * \param [out] cursor  Address where the new \ref MDBX_cursor handle will be
 *                      stored.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL  An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_open(const MDBX_txn *txn, MDBX_dbi dbi,
                                 MDBX_cursor **cursor);

/** \brief Close a cursor handle.
 * \ingroup c_cursors
 *
 * The cursor handle will be freed and must not be used again after this call,
 * but its transaction may still be live.
 *
 * \note In contrast to LMDB, the MDBX required that any opened cursors can be
 * reused and must be freed explicitly, regardless ones was opened in a
 * read-only or write transaction. The REASON for this is eliminates ambiguity
 * which helps to avoid errors such as: use-after-free, double-free, i.e.
 * memory corruption and segfaults.
 *
 * \param [in] cursor  A cursor handle returned by \ref mdbx_cursor_open()
 *                     or \ref mdbx_cursor_create(). */
LIBMDBX_API void mdbx_cursor_close(MDBX_cursor *cursor);

/** \brief Unbind or closes all cursors of a given transaction.
 * \ingroup c_cursors
 *
 * Unbinds either closes all cursors associated (opened or renewed) with
 * a given transaction in a bulk with minimal overhead.
 *
 * \see mdbx_cursor_unbind()
 * \see mdbx_cursor_close()
 *
 * \param [in] txn      A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] unbind   If non-zero, unbinds cursors and leaves ones reusable.
 *                      Otherwise close and dispose cursors.
 *
 * \returns A negative error value on failure or the number of closed cursors
 *          on success, some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_BAD_TXN          Given transaction is invalid or has
 *                               a child/nested transaction transaction. */
LIBMDBX_API int mdbx_txn_release_all_cursors(const MDBX_txn *txn, bool unbind);

/** \brief Renew a cursor handle for use within the given transaction.
 * \ingroup c_cursors
 *
 * A cursor may be associated with a new transaction whether the previous
 * transaction is running or finished.
 *
 * Using of the `mdbx_cursor_renew()` is equivalent to calling
 * \ref mdbx_cursor_bind() with the DBI-handle that previously
 * the cursor was used with.
 *
 * \note In contrast to LMDB, the MDBX allow any cursor to be re-used by using
 * \ref mdbx_cursor_renew(), to avoid unnecessary malloc/free overhead until it
 * freed by \ref mdbx_cursor_close().
 *
 * \param [in] txn      A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] cursor   A cursor handle returned by \ref mdbx_cursor_open().
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL  An invalid parameter was specified.
 * \retval MDBX_BAD_DBI The cursor was not bound to a DBI-handle
 *                      or such a handle became invalid. */
LIBMDBX_API int mdbx_cursor_renew(const MDBX_txn *txn, MDBX_cursor *cursor);

/** \brief Return the cursor's transaction handle.
 * \ingroup c_cursors
 *
 * \param [in] cursor A cursor handle returned by \ref mdbx_cursor_open(). */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API MDBX_txn *
mdbx_cursor_txn(const MDBX_cursor *cursor);

/** \brief Return the cursor's table handle.
 * \ingroup c_cursors
 *
 * \param [in] cursor  A cursor handle returned by \ref mdbx_cursor_open(). */
LIBMDBX_API MDBX_dbi mdbx_cursor_dbi(const MDBX_cursor *cursor);

/** \brief Copy cursor position and state.
 * \ingroup c_cursors
 *
 * \param [in] src       A source cursor handle returned
 * by \ref mdbx_cursor_create() or \ref mdbx_cursor_open().
 *
 * \param [in,out] dest  A destination cursor handle returned
 * by \ref mdbx_cursor_create() or \ref mdbx_cursor_open().
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_cursor_copy(const MDBX_cursor *src, MDBX_cursor *dest);

/** \brief Сравнивает позицию курсоров.
 * \ingroup c_cursors
 *
 * Функция предназначена для сравнения позиций двух
 * инициализированных/установленных курсоров, связанных с одной транзакцией и
 * одной таблицей (DBI-дескриптором).
 * Если же курсоры связаны с разными транзакциями, либо с разными таблицами,
 * либо один из них не инициализирован, то результат сравнения не определен
 * (поведением может быть изменено в последующих версиях).
 *
 * \param [in] left             Левый курсор для сравнения позиций.
 * \param [in] right            Правый курсор для сравнения позиций.
 * \param [in] ignore_multival  Булевой флаг, влияющий на результат только при
 *        сравнении курсоров для таблиц с мульти-значениями, т.е. с флагом
 *        \ref MDBX_DUPSORT. В случае `true`, позиции курсоров сравниваются
 *        только по ключам, без учета позиционирования среди мульти-значений.
 *        Иначе, в случае `false`, при совпадении позиций по ключам,
 *        сравниваются также позиции по мульти-значениям.
 *
 * \retval Значение со знаком в семантике оператора `<=>` (меньше нуля, ноль,
 * либо больше нуля) как результат сравнения позиций курсоров. */
LIBMDBX_API int mdbx_cursor_compare(const MDBX_cursor *left,
                                    const MDBX_cursor *right,
                                    bool ignore_multival);

/** \brief Retrieve by cursor.
 * \ingroup c_crud
 *
 * This function retrieves key/data pairs from the table. The address and
 * length of the key are returned in the object to which key refers (except
 * for the case of the \ref MDBX_SET option, in which the key object is
 * unchanged), and the address and length of the data are returned in the object
 * to which data refers.
 * \see mdbx_get()
 *
 * \note The memory pointed to by the returned values is owned by the
 * database. The caller MUST not dispose of the memory, and MUST not modify it
 * in any way regardless in a read-only nor read-write transactions!
 * For case a database opened without the \ref MDBX_WRITEMAP modification
 * attempts likely will cause a `SIGSEGV`. However, when a database opened with
 * the \ref MDBX_WRITEMAP or in case values returned inside read-write
 * transaction are located on a "dirty" (modified and pending to commit) pages,
 * such modification will silently accepted and likely will lead to DB and/or
 * data corruption.
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 * \param [in,out] key   The key for a retrieved item.
 * \param [in,out] data  The data of a retrieved item.
 * \param [in] op        A cursor operation \ref MDBX_cursor_op.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_NOTFOUND  No matching key found.
 * \retval MDBX_EINVAL    An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_get(MDBX_cursor *cursor, MDBX_val *key,
                                MDBX_val *data, MDBX_cursor_op op);

/** \brief Служебная функция для использования в утилитах.
 * \ingroup c_extra
 *
 * При использовании определяемых пользователем функций сравнения (aka custom
 * comparison functions) проверка порядка ключей может приводить к неверным
 * результатам и возврате ошибки \ref MDBX_CORRUPTED.
 *
 * Эта функция отключает контроль порядка следования ключей на страницах при
 * чтении страниц БД для этого курсора, и таким образом, позволяет прочитать
 * данные при отсутствии/недоступности использованных функций сравнения.
 * \see avoid_custom_comparators
 *
 * \returns Результат операции сканирования, либо код ошибки. */
LIBMDBX_API int mdbx_cursor_ignord(MDBX_cursor *cursor);

/** \brief Тип предикативных функций обратного вызова используемых
 * \ref mdbx_cursor_scan() и \ref mdbx_cursor_scan_from() для пробирования
 * пар ключ-значения.
 * \ingroup c_crud
 *
 * \param [in,out] context  Указатель на контекст с необходимой для оценки
 *                          информацией, который полностью подготавливается
 *                          и контролируется вами.
 * \param [in] key          Ключ для оценки пользовательской функцией.
 * \param [in] value        Значение для оценки пользовательской функцией.
 * \param [in,out] arg      Дополнительный аргумент предикативной функции,
 *                          который полностью подготавливается
 *                          и контролируется вами.
 *
 * \returns Результат проверки соответствия переданной пары ключ-значения
 * искомой цели. Иначе код ошибки, который прерывает сканирование и возвращается
 * без изменения в качестве результата из функций \ref mdbx_cursor_scan()
 * или \ref mdbx_cursor_scan_from().
 *
 * \retval MDBX_RESULT_TRUE если переданная пара ключ-значение соответствует
 *         искомой и следует завершить сканирование.
 * \retval MDBX_RESULT_FALSE если переданная пара ключ-значение НЕ соответствует
 *         искомой и следует продолжать сканирование.
 * \retval ИНАЧЕ любое другое значение, отличное от \ref MDBX_RESULT_TRUE
 *         и \ref MDBX_RESULT_FALSE, считается индикатором ошибки
 *         и возвращается без изменений в качестве результата сканирования.
 *
 * \see mdbx_cursor_scan()
 * \see mdbx_cursor_scan_from() */
typedef int(MDBX_predicate_func)(void *context, MDBX_val *key, MDBX_val *value,
                                 void *arg) MDBX_CXX17_NOEXCEPT;

/** \brief Сканирует таблицу с использованием передаваемого предиката,
 * с уменьшением сопутствующих накладных расходов.
 * \ingroup c_crud
 *
 * Реализует функционал сходный с шаблоном `std::find_if<>()` с использованием
 * курсора и пользовательской предикативной функции, экономя при этом
 * на сопутствующих накладных расходах, в том числе, не выполняя часть проверок
 * внутри цикла итерации записей и потенциально уменьшая количество
 * DSO-трансграничных вызовов.
 *
 * Функция принимает курсор, который должен быть привязан к некоторой транзакции
 * и DBI-дескриптору таблицы, выполняет первоначальное позиционирование курсора
 * определяемое аргументом `start_op`. Далее, производится оценка каждой пары
 * ключ-значения посредством предоставляемой вами предикативной функции
 * `predicate` и затем, при необходимости, переход к следующему элементу
 * посредством операции `turn_op`, до наступления одного из четырех событий:
 *  - достигается конец данных;
 *  - возникнет ошибка при позиционировании курсора;
 *  - оценочная функция вернет \ref MDBX_RESULT_TRUE, сигнализируя
 *    о необходимости остановить дальнейшее сканирование;
 *  - оценочная функция возвратит значение отличное от \ref MDBX_RESULT_FALSE
 *    и \ref MDBX_RESULT_TRUE сигнализируя об ошибке.
 *
 * \param [in,out] cursor   Курсор для выполнения операции сканирования,
 *                          связанный с активной транзакцией и DBI-дескриптором
 *                          таблицы. Например, курсор созданный
 *                          посредством \ref mdbx_cursor_open().
 * \param [in] predicate    Предикативная функция для оценки итерируемых
 *                          пар ключ-значения,
 *                          более подробно смотрите \ref MDBX_predicate_func.
 * \param [in,out] context  Указатель на контекст с необходимой для оценки
 *                          информацией, который полностью подготавливается
 *                          и контролируется вами.
 * \param [in] start_op     Стартовая операция позиционирования курсора,
 *                          более подробно смотрите \ref MDBX_cursor_op.
 *                          Для сканирования без изменения исходной позиции
 *                          курсора используйте \ref MDBX_GET_CURRENT.
 *                          Допустимые значения \ref MDBX_FIRST,
 *                          \ref MDBX_FIRST_DUP, \ref MDBX_LAST,
 *                          \ref MDBX_LAST_DUP, \ref MDBX_GET_CURRENT,
 *                          а также \ref MDBX_GET_MULTIPLE.
 * \param [in] turn_op      Операция позиционирования курсора для перехода
 *                          к следующему элементу. Допустимые значения
 *                          \ref MDBX_NEXT, \ref MDBX_NEXT_DUP,
 *                          \ref MDBX_NEXT_NODUP, \ref MDBX_PREV,
 *                          \ref MDBX_PREV_DUP, \ref MDBX_PREV_NODUP, а также
 *                          \ref MDBX_NEXT_MULTIPLE и \ref MDBX_PREV_MULTIPLE.
 * \param [in,out] arg      Дополнительный аргумент предикативной функции,
 *                          который полностью подготавливается
 *                          и контролируется вами.
 *
 * \note При использовании \ref MDBX_GET_MULTIPLE, \ref MDBX_NEXT_MULTIPLE
 * или \ref MDBX_PREV_MULTIPLE внимательно учитывайте пакетную специфику
 * передачи значений через параметры предикативной функции.
 *
 * \see MDBX_predicate_func
 * \see mdbx_cursor_scan_from
 *
 * \returns Результат операции сканирования, либо код ошибки.
 *
 * \retval MDBX_RESULT_TRUE если найдена пара ключ-значение, для которой
 *         предикативная функция вернула \ref MDBX_RESULT_TRUE.
 * \retval MDBX_RESULT_FALSE если если подходящая пара ключ-значения НЕ найдена,
 *         в процессе поиска достигнут конец данных, либо нет данных для поиска.
 * \retval ИНАЧЕ любое другое значение, отличное от \ref MDBX_RESULT_TRUE
 *         и \ref MDBX_RESULT_FALSE, является кодом ошибки при позиционировании
 *         курса, либо определяемым пользователем кодом остановки поиска
 *         или ошибочной ситуации. */
LIBMDBX_API int mdbx_cursor_scan(MDBX_cursor *cursor,
                                 MDBX_predicate_func *predicate, void *context,
                                 MDBX_cursor_op start_op,
                                 MDBX_cursor_op turn_op, void *arg);

/** Сканирует таблицу с использованием передаваемого предиката,
 *  начиная с передаваемой пары ключ-значение,
 *  с уменьшением сопутствующих накладных расходов.
 * \ingroup c_crud
 *
 * Функция принимает курсор, который должен быть привязан к некоторой транзакции
 * и DBI-дескриптору таблицы, выполняет первоначальное позиционирование курсора
 * определяемое аргументом `from_op`. а также аргументами `from_key` и
 * `from_value`. Далее, производится оценка каждой пары ключ-значения
 * посредством предоставляемой вами предикативной функции `predicate` и затем,
 * при необходимости, переход к следующему элементу посредством операции
 * `turn_op`, до наступления одного из четырех событий:
 *  - достигается конец данных;
 *  - возникнет ошибка при позиционировании курсора;
 *  - оценочная функция вернет \ref MDBX_RESULT_TRUE, сигнализируя
 *    о необходимости остановить дальнейшее сканирование;
 *  - оценочная функция возвратит значение отличное от \ref MDBX_RESULT_FALSE
 *    и \ref MDBX_RESULT_TRUE сигнализируя об ошибке.
 *
 * \param [in,out] cursor    Курсор для выполнения операции сканирования,
 *                           связанный с активной транзакцией и DBI-дескриптором
 *                           таблицы. Например, курсор созданный
 *                           посредством \ref mdbx_cursor_open().
 * \param [in] predicate     Предикативная функция для оценки итерируемых
 *                           пар ключ-значения,
 *                           более подробно смотрите \ref MDBX_predicate_func.
 * \param [in,out] context   Указатель на контекст с необходимой для оценки
 *                           информацией, который полностью подготавливается
 *                           и контролируется вами.
 * \param [in] from_op       Операция позиционирования курсора к исходной
 *                           позиции, более подробно смотрите
 *                           \ref MDBX_cursor_op.
 *                           Допустимые значения \ref MDBX_GET_BOTH,
 *                           \ref MDBX_GET_BOTH_RANGE, \ref MDBX_SET_KEY,
 *                           \ref MDBX_SET_LOWERBOUND, \ref MDBX_SET_UPPERBOUND,
 *                           \ref MDBX_TO_KEY_LESSER_THAN,
 *                           \ref MDBX_TO_KEY_LESSER_OR_EQUAL,
 *                           \ref MDBX_TO_KEY_EQUAL,
 *                           \ref MDBX_TO_KEY_GREATER_OR_EQUAL,
 *                           \ref MDBX_TO_KEY_GREATER_THAN,
 *                           \ref MDBX_TO_EXACT_KEY_VALUE_LESSER_THAN,
 *                           \ref MDBX_TO_EXACT_KEY_VALUE_LESSER_OR_EQUAL,
 *                           \ref MDBX_TO_EXACT_KEY_VALUE_EQUAL,
 *                           \ref MDBX_TO_EXACT_KEY_VALUE_GREATER_OR_EQUAL,
 *                           \ref MDBX_TO_EXACT_KEY_VALUE_GREATER_THAN,
 *                           \ref MDBX_TO_PAIR_LESSER_THAN,
 *                           \ref MDBX_TO_PAIR_LESSER_OR_EQUAL,
 *                           \ref MDBX_TO_PAIR_EQUAL,
 *                           \ref MDBX_TO_PAIR_GREATER_OR_EQUAL,
 *                           \ref MDBX_TO_PAIR_GREATER_THAN,
 *                           а также \ref MDBX_GET_MULTIPLE.
 * \param [in,out] from_key  Указатель на ключ используемый как для исходного
 *                           позиционирования, так и для последующих итераций
 *                           перехода.
 * \param [in,out] from_value Указатель на значние используемое как для
 *                            исходного позиционирования, так и для последующих
 *                            итераций перехода.
 * \param [in] turn_op       Операция позиционирования курсора для перехода
 *                           к следующему элементу. Допустимые значения
 *                           \ref MDBX_NEXT, \ref MDBX_NEXT_DUP,
 *                           \ref MDBX_NEXT_NODUP, \ref MDBX_PREV,
 *                           \ref MDBX_PREV_DUP, \ref MDBX_PREV_NODUP, а также
 *                           \ref MDBX_NEXT_MULTIPLE и \ref MDBX_PREV_MULTIPLE.
 * \param [in,out] arg       Дополнительный аргумент предикативной функции,
 *                           который полностью подготавливается
 *                           и контролируется вами.
 *
 * \note При использовании \ref MDBX_GET_MULTIPLE, \ref MDBX_NEXT_MULTIPLE
 * или \ref MDBX_PREV_MULTIPLE внимательно учитывайте пакетную специфику
 * передачи значений через параметры предикативной функции.
 *
 * \see MDBX_predicate_func
 * \see mdbx_cursor_scan
 *
 * \returns Результат операции сканирования, либо код ошибки.
 *
 * \retval MDBX_RESULT_TRUE если найдена пара ключ-значение, для которой
 *         предикативная функция вернула \ref MDBX_RESULT_TRUE.
 * \retval MDBX_RESULT_FALSE если если подходящая пара ключ-значения НЕ найдена,
 *         в процессе поиска достигнут конец данных, либо нет данных для поиска.
 * \retval ИНАЧЕ любое другое значение, отличное от \ref MDBX_RESULT_TRUE
 *         и \ref MDBX_RESULT_FALSE, является кодом ошибки при позиционировании
 *         курса, либо определяемым пользователем кодом остановки поиска
 *         или ошибочной ситуации. */
LIBMDBX_API int mdbx_cursor_scan_from(MDBX_cursor *cursor,
                                      MDBX_predicate_func *predicate,
                                      void *context, MDBX_cursor_op from_op,
                                      MDBX_val *from_key, MDBX_val *from_value,
                                      MDBX_cursor_op turn_op, void *arg);

/** \brief Retrieve multiple non-dupsort key/value pairs by cursor.
 * \ingroup c_crud
 *
 * This function retrieves multiple key/data pairs from the table without
 * \ref MDBX_DUPSORT option. For `MDBX_DUPSORT` tables please
 * use \ref MDBX_GET_MULTIPLE and \ref MDBX_NEXT_MULTIPLE.
 *
 * The number of key and value items is returned in the `size_t count`
 * refers. The addresses and lengths of the keys and values are returned in the
 * array to which `pairs` refers.
 * \see mdbx_cursor_get()
 *
 * \note The memory pointed to by the returned values is owned by the
 * database. The caller MUST not dispose of the memory, and MUST not modify it
 * in any way regardless in a read-only nor read-write transactions!
 * For case a database opened without the \ref MDBX_WRITEMAP modification
 * attempts likely will cause a `SIGSEGV`. However, when a database opened with
 * the \ref MDBX_WRITEMAP or in case values returned inside read-write
 * transaction are located on a "dirty" (modified and pending to commit) pages,
 * such modification will silently accepted and likely will lead to DB and/or
 * data corruption.
 *
 * \param [in] cursor     A cursor handle returned by \ref mdbx_cursor_open().
 * \param [out] count     The number of key and value item returned, on success
 *                        it always be the even because the key-value
 *                        pairs are returned.
 * \param [in,out] pairs  A pointer to the array of key value pairs.
 * \param [in] limit      The size of pairs buffer as the number of items,
 *                        but not a pairs.
 * \param [in] op         A cursor operation \ref MDBX_cursor_op (only
 *                        \ref MDBX_FIRST and \ref MDBX_NEXT are supported).
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_NOTFOUND         No any key-value pairs are available.
 * \retval MDBX_ENODATA          The cursor is already at the end of data.
 * \retval MDBX_RESULT_TRUE      The returned chunk is the last one,
 *                               and there are no pairs left.
 * \retval MDBX_EINVAL           An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_get_batch(MDBX_cursor *cursor, size_t *count,
                                      MDBX_val *pairs, size_t limit,
                                      MDBX_cursor_op op);

/** \brief Store by cursor.
 * \ingroup c_crud
 *
 * This function stores key/data pairs into the table. The cursor is
 * positioned at the new item, or on failure usually near it.
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 * \param [in] key       The key operated on.
 * \param [in,out] data  The data operated on.
 * \param [in] flags     Options for this operation. This parameter
 *                       must be set to 0 or by bitwise OR'ing together
 *                       one or more of the values described here:
 *  - \ref MDBX_CURRENT
 *      Replace the item at the current cursor position. The key parameter
 *      must still be provided, and must match it, otherwise the function
 *      return \ref MDBX_EKEYMISMATCH. With combination the
 *      \ref MDBX_ALLDUPS will replace all multi-values.
 *
 *      \note MDBX allows (unlike LMDB) you to change the size of the data and
 *      automatically handles reordering for sorted duplicates
 *      (see \ref MDBX_DUPSORT).
 *
 *  - \ref MDBX_NODUPDATA
 *      Enter the new key-value pair only if it does not already appear in the
 *      table. This flag may only be specified if the table was opened
 *      with \ref MDBX_DUPSORT. The function will return \ref MDBX_KEYEXIST
 *      if the key/data pair already appears in the table.
 *
 *  - \ref MDBX_NOOVERWRITE
 *      Enter the new key/data pair only if the key does not already appear
 *      in the table. The function will return \ref MDBX_KEYEXIST if the key
 *      already appears in the table, even if the table supports
 *      duplicates (\ref MDBX_DUPSORT).
 *
 *  - \ref MDBX_RESERVE
 *      Reserve space for data of the given size, but don't copy the given
 *      data. Instead, return a pointer to the reserved space, which the
 *      caller can fill in later - before the next update operation or the
 *      transaction ends. This saves an extra memcpy if the data is being
 *      generated later. This flag must not be specified if the table
 *      was opened with \ref MDBX_DUPSORT.
 *
 *  - \ref MDBX_APPEND
 *      Append the given key/data pair to the end of the table. No key
 *      comparisons are performed. This option allows fast bulk loading when
 *      keys are already known to be in the correct order. Loading unsorted
 *      keys with this flag will cause a \ref MDBX_KEYEXIST error.
 *
 *  - \ref MDBX_APPENDDUP
 *      As above, but for sorted dup data.
 *
 *  - \ref MDBX_MULTIPLE
 *      Store multiple contiguous data elements in a single request. This flag
 *      may only be specified if the table was opened with
 *      \ref MDBX_DUPFIXED. With combination the \ref MDBX_ALLDUPS
 *      will replace all multi-values.
 *      The data argument must be an array of two \ref MDBX_val. The `iov_len`
 *      of the first \ref MDBX_val must be the size of a single data element.
 *      The `iov_base` of the first \ref MDBX_val must point to the beginning
 *      of the array of contiguous data elements which must be properly aligned
 *      in case of table with \ref MDBX_INTEGERDUP flag.
 *      The `iov_len` of the second \ref MDBX_val must be the count of the
 *      number of data elements to store. On return this field will be set to
 *      the count of the number of elements actually written. The `iov_base` of
 *      the second \ref MDBX_val is unused.
 *
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EKEYMISMATCH  The given key value is mismatched to the current
 *                            cursor position
 * \retval MDBX_MAP_FULL      The database is full,
 *                             see \ref mdbx_env_set_mapsize().
 * \retval MDBX_TXN_FULL      The transaction has too many dirty pages.
 * \retval MDBX_EACCES        An attempt was made to write in a read-only
 *                            transaction.
 * \retval MDBX_EINVAL        An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_put(MDBX_cursor *cursor, const MDBX_val *key,
                                MDBX_val *data, MDBX_put_flags_t flags);

/** \brief Delete current key/data pair.
 * \ingroup c_crud
 *
 * This function deletes the key/data pair to which the cursor refers. This
 * does not invalidate the cursor, so operations such as \ref MDBX_NEXT can
 * still be used on it. Both \ref MDBX_NEXT and \ref MDBX_GET_CURRENT will
 * return the same record after this operation.
 *
 * \param [in] cursor  A cursor handle returned by mdbx_cursor_open().
 * \param [in] flags   Options for this operation. This parameter must be set
 * to one of the values described here.
 *
 *  - \ref MDBX_CURRENT Delete only single entry at current cursor position.
 *  - \ref MDBX_ALLDUPS
 *    or \ref MDBX_NODUPDATA (supported for compatibility)
 *      Delete all of the data items for the current key. This flag has effect
 *      only for table(s) was created with \ref MDBX_DUPSORT.
 *
 * \see \ref c_crud_hints "Quick reference for Insert/Update/Delete operations"
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_MAP_FULL      The database is full,
 *                            see \ref mdbx_env_set_mapsize().
 * \retval MDBX_TXN_FULL      The transaction has too many dirty pages.
 * \retval MDBX_EACCES        An attempt was made to write in a read-only
 *                            transaction.
 * \retval MDBX_EINVAL        An invalid parameter was specified. */
LIBMDBX_API int mdbx_cursor_del(MDBX_cursor *cursor, MDBX_put_flags_t flags);

/** \brief Return count of duplicates for current key.
 * \ingroup c_crud
 *
 * This call is valid for all tables, but reasonable only for that support
 * sorted duplicate data items \ref MDBX_DUPSORT.
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 * \param [out] pcount   Address where the count will be stored.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_THREAD_MISMATCH  Given transaction is not owned
 *                               by current thread.
 * \retval MDBX_EINVAL   Cursor is not initialized, or an invalid parameter
 *                       was specified. */
LIBMDBX_API int mdbx_cursor_count(const MDBX_cursor *cursor, size_t *pcount);

/** \brief Determines whether the cursor is pointed to a key-value pair or not,
 * i.e. was not positioned or points to the end of data.
 * \ingroup c_cursors
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 *
 * \returns A \ref MDBX_RESULT_TRUE or \ref MDBX_RESULT_FALSE value,
 *          otherwise the error code.
 * \retval MDBX_RESULT_TRUE    No more data available or cursor not
 *                             positioned
 * \retval MDBX_RESULT_FALSE   A data is available
 * \retval Otherwise the error code */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_cursor_eof(const MDBX_cursor *cursor);

/** \brief Determines whether the cursor is pointed to the first key-value pair
 * or not.
 * \ingroup c_cursors
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 *
 * \returns A MDBX_RESULT_TRUE or MDBX_RESULT_FALSE value,
 *          otherwise the error code.
 * \retval MDBX_RESULT_TRUE   Cursor positioned to the first key-value pair
 * \retval MDBX_RESULT_FALSE  Cursor NOT positioned to the first key-value
 * pair \retval Otherwise the error code */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_cursor_on_first(const MDBX_cursor *cursor);

/** \brief Определяет стоит ли курсор на первом или единственном
 * мульти-значении соответствующем ключу.
 * \ingroup c_cursors
 * \param [in] cursor    Курсор созданный посредством \ref mdbx_cursor_open().
 * \returns Значание \ref MDBX_RESULT_TRUE, либо \ref MDBX_RESULT_FALSE,
 *          иначе код ошибки.
 * \retval MDBX_RESULT_TRUE   курсор установлен на первом или единственном
 *                            мульти-значении соответствующем ключу.
 * \retval MDBX_RESULT_FALSE  курсор НЕ установлен на первом или единственном
 *                            мульти-значении соответствующем ключу.
 * \retval ИНАЧЕ код ошибки. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_cursor_on_first_dup(const MDBX_cursor *cursor);

/** \brief Determines whether the cursor is pointed to the last key-value pair
 * or not.
 * \ingroup c_cursors
 *
 * \param [in] cursor    A cursor handle returned by \ref mdbx_cursor_open().
 *
 * \returns A \ref MDBX_RESULT_TRUE or \ref MDBX_RESULT_FALSE value,
 *          otherwise the error code.
 * \retval MDBX_RESULT_TRUE   Cursor positioned to the last key-value pair
 * \retval MDBX_RESULT_FALSE  Cursor NOT positioned to the last key-value pair
 * \retval Otherwise the error code */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_cursor_on_last(const MDBX_cursor *cursor);

/** \brief Определяет стоит ли курсор на последнем или единственном
 * мульти-значении соответствующем ключу.
 * \ingroup c_cursors
 * \param [in] cursor    Курсор созданный посредством \ref mdbx_cursor_open().
 * \returns Значание \ref MDBX_RESULT_TRUE, либо \ref MDBX_RESULT_FALSE,
 *          иначе код ошибки.
 * \retval MDBX_RESULT_TRUE   курсор установлен на последнем или единственном
 *                            мульти-значении соответствующем ключу.
 * \retval MDBX_RESULT_FALSE  курсор НЕ установлен на последнем или единственном
 *                            мульти-значении соответствующем ключу.
 * \retval ИНАЧЕ код ошибки. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int
mdbx_cursor_on_last_dup(const MDBX_cursor *cursor);

/** \addtogroup c_rqest
 * \details \note The estimation result varies greatly depending on the filling
 * of specific pages and the overall balance of the b-tree:
 *
 * 1. The number of items is estimated by analyzing the height and fullness of
 * the b-tree. The accuracy of the result directly depends on the balance of
 * the b-tree, which in turn is determined by the history of previous
 * insert/delete operations and the nature of the data (i.e. variability of
 * keys length and so on). Therefore, the accuracy of the estimation can vary
 * greatly in a particular situation.
 *
 * 2. To understand the potential spread of results, you should consider a
 * possible situations basing on the general criteria for splitting and merging
 * b-tree pages:
 *  - the page is split into two when there is no space for added data;
 *  - two pages merge if the result fits in half a page;
 *  - thus, the b-tree can consist of an arbitrary combination of pages filled
 *    both completely and only 1/4. Therefore, in the worst case, the result
 *    can diverge 4 times for each level of the b-tree excepting the first and
 *    the last.
 *
 * 3. In practice, the probability of extreme cases of the above situation is
 * close to zero and in most cases the error does not exceed a few percent. On
 * the other hand, it's just a chance you shouldn't overestimate. */

/** \brief Estimates the distance between cursors as a number of elements.
 * \ingroup c_rqest
 *
 * This function performs a rough estimate based only on b-tree pages that are
 * common for the both cursor's stacks. The results of such estimation can be
 * used to build and/or optimize query execution plans.
 *
 * Please see notes on accuracy of the result in the details
 * of \ref c_rqest section.
 *
 * Both cursors must be initialized for the same table and the same
 * transaction.
 *
 * \param [in] first            The first cursor for estimation.
 * \param [in] last             The second cursor for estimation.
 * \param [out] distance_items  The pointer to store estimated distance value,
 *                              i.e. `*distance_items = distance(first, last)`.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_estimate_distance(const MDBX_cursor *first,
                                       const MDBX_cursor *last,
                                       ptrdiff_t *distance_items);

/** \brief Estimates the move distance.
 * \ingroup c_rqest
 *
 * This function performs a rough estimate distance between the current
 * cursor position and next position after the specified move-operation with
 * given key and data. The results of such estimation can be used to build
 * and/or optimize query execution plans. Current cursor position and state are
 * preserved.
 *
 * Please see notes on accuracy of the result in the details
 * of \ref c_rqest section.
 *
 * \param [in] cursor            Cursor for estimation.
 * \param [in,out] key           The key for a retrieved item.
 * \param [in,out] data          The data of a retrieved item.
 * \param [in] move_op           A cursor operation \ref MDBX_cursor_op.
 * \param [out] distance_items   A pointer to store estimated move distance
 *                               as the number of elements.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_estimate_move(const MDBX_cursor *cursor, MDBX_val *key,
                                   MDBX_val *data, MDBX_cursor_op move_op,
                                   ptrdiff_t *distance_items);

/** \brief Estimates the size of a range as a number of elements.
 * \ingroup c_rqest
 *
 * The results of such estimation can be used to build and/or optimize query
 * execution plans.
 *
 * Please see notes on accuracy of the result in the details
 * of \ref c_rqest section.
 *
 *
 * \param [in] txn        A transaction handle returned
 *                        by \ref mdbx_txn_begin().
 * \param [in] dbi        A table handle returned by  \ref mdbx_dbi_open().
 * \param [in] begin_key  The key of range beginning or NULL for explicit FIRST.
 * \param [in] begin_data Optional additional data to seeking among sorted
 *                        duplicates.
 *                        Only for \ref MDBX_DUPSORT, NULL otherwise.
 * \param [in] end_key    The key of range ending or NULL for explicit LAST.
 * \param [in] end_data   Optional additional data to seeking among sorted
 *                        duplicates.
 *                        Only for \ref MDBX_DUPSORT, NULL otherwise.
 * \param [out] distance_items  A pointer to store range estimation result.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_estimate_range(const MDBX_txn *txn, MDBX_dbi dbi,
                                    const MDBX_val *begin_key,
                                    const MDBX_val *begin_data,
                                    const MDBX_val *end_key,
                                    const MDBX_val *end_data,
                                    ptrdiff_t *distance_items);

/** \brief The EPSILON value for mdbx_estimate_range()
 * \ingroup c_rqest */
#define MDBX_EPSILON ((MDBX_val *)((ptrdiff_t)-1))

/** \brief Determines whether the given address is on a dirty database page of
 * the transaction or not.
 * \ingroup c_statinfo
 *
 * Ultimately, this allows to avoid copy data from non-dirty pages.
 *
 * "Dirty" pages are those that have already been changed during a write
 * transaction. Accordingly, any further changes may result in such pages being
 * overwritten. Therefore, all functions libmdbx performing changes inside the
 * database as arguments should NOT get pointers to data in those pages. In
 * turn, "not dirty" pages before modification will be copied.
 *
 * In other words, data from dirty pages must either be copied before being
 * passed as arguments for further processing or rejected at the argument
 * validation stage. Thus, `mdbx_is_dirty()` allows you to get rid of
 * unnecessary copying, and perform a more complete check of the arguments.
 *
 * \note The address passed must point to the beginning of the data. This is
 * the only way to ensure that the actual page header is physically located in
 * the same memory page, including for multi-pages with long data.
 *
 * \note In rare cases the function may return a false positive answer
 * (\ref MDBX_RESULT_TRUE when data is NOT on a dirty page), but never a false
 * negative if the arguments are correct.
 *
 * \param [in] txn      A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] ptr      The address of data to check.
 *
 * \returns A MDBX_RESULT_TRUE or MDBX_RESULT_FALSE value,
 *          otherwise the error code.
 * \retval MDBX_RESULT_TRUE    Given address is on the dirty page.
 * \retval MDBX_RESULT_FALSE   Given address is NOT on the dirty page.
 * \retval Otherwise the error code. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int mdbx_is_dirty(const MDBX_txn *txn,
                                                         const void *ptr);

/** \brief Sequence generation for a table.
 * \ingroup c_crud
 *
 * The function allows to create a linear sequence of unique positive integers
 * for each table. The function can be called for a read transaction to
 * retrieve the current sequence value, and the increment must be zero.
 * Sequence changes become visible outside the current write transaction after
 * it is committed, and discarded on abort.
 *
 * \param [in] txn        A transaction handle returned
 *                        by \ref mdbx_txn_begin().
 * \param [in] dbi        A table handle returned by \ref mdbx_dbi_open().
 * \param [out] result    The optional address where the value of sequence
 *                        before the change will be stored.
 * \param [in] increment  Value to increase the sequence,
 *                        must be 0 for read-only transactions.
 *
 * \returns A non-zero error value on failure and 0 on success,
 *          some possible errors are:
 * \retval MDBX_RESULT_TRUE   Increasing the sequence has resulted in an
 *                            overflow and therefore cannot be executed. */
LIBMDBX_API int mdbx_dbi_sequence(MDBX_txn *txn, MDBX_dbi dbi, uint64_t *result,
                                  uint64_t increment);

/** \brief Compare two keys according to a particular table.
 * \ingroup c_crud
 * \see MDBX_cmp_func
 *
 * This returns a comparison as if the two data items were keys in the
 * specified table.
 *
 * \warning There ss a Undefined behavior if one of arguments is invalid.
 *
 * \param [in] txn   A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi   A table handle returned by \ref mdbx_dbi_open().
 * \param [in] a     The first item to compare.
 * \param [in] b     The second item to compare.
 *
 * \returns < 0 if a < b, 0 if a == b, > 0 if a > b */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int mdbx_cmp(const MDBX_txn *txn,
                                                    MDBX_dbi dbi,
                                                    const MDBX_val *a,
                                                    const MDBX_val *b);

/** \brief Returns default internal key's comparator for given table flags.
 * \ingroup c_extra */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API MDBX_cmp_func *
mdbx_get_keycmp(MDBX_db_flags_t flags);

/** \brief Compare two data items according to a particular table.
 * \ingroup c_crud
 * \see MDBX_cmp_func
 *
 * This returns a comparison as if the two items were data items of the
 * specified table.
 *
 * \warning There ss a Undefined behavior if one of arguments is invalid.
 *
 * \param [in] txn   A transaction handle returned by \ref mdbx_txn_begin().
 * \param [in] dbi   A table handle returned by \ref mdbx_dbi_open().
 * \param [in] a     The first item to compare.
 * \param [in] b     The second item to compare.
 *
 * \returns < 0 if a < b, 0 if a == b, > 0 if a > b */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API int mdbx_dcmp(const MDBX_txn *txn,
                                                     MDBX_dbi dbi,
                                                     const MDBX_val *a,
                                                     const MDBX_val *b);

/** \brief Returns default internal data's comparator for given table flags
 * \ingroup c_extra */
MDBX_NOTHROW_CONST_FUNCTION LIBMDBX_API MDBX_cmp_func *
mdbx_get_datacmp(MDBX_db_flags_t flags);

/** \brief A callback function used to enumerate the reader lock table.
 * \ingroup c_statinfo
 *
 * \param [in] ctx            An arbitrary context pointer for the callback.
 * \param [in] num            The serial number during enumeration,
 *                            starting from 1.
 * \param [in] slot           The reader lock table slot number.
 * \param [in] txnid          The ID of the transaction being read,
 *                            i.e. the MVCC-snapshot number.
 * \param [in] lag            The lag from a recent MVCC-snapshot,
 *                            i.e. the number of committed write transactions
 *                            since the current read transaction started.
 * \param [in] pid            The reader process ID.
 * \param [in] thread         The reader thread ID.
 * \param [in] bytes_used     The number of last used page
 *                            in the MVCC-snapshot which being read,
 *                            i.e. database file can't be shrunk beyond this.
 * \param [in] bytes_retained The total size of the database pages that were
 *                            retired by committed write transactions after
 *                            the reader's MVCC-snapshot,
 *                            i.e. the space which would be freed after
 *                            the Reader releases the MVCC-snapshot
 *                            for reuse by completion read transaction.
 *
 * \returns < 0 on failure, >= 0 on success. \see mdbx_reader_list() */
typedef int(MDBX_reader_list_func)(void *ctx, int num, int slot, mdbx_pid_t pid,
                                   mdbx_tid_t thread, uint64_t txnid,
                                   uint64_t lag, size_t bytes_used,
                                   size_t bytes_retained) MDBX_CXX17_NOEXCEPT;

/** \brief Enumerate the entries in the reader lock table.
 *
 * \ingroup c_statinfo
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [in] func    A \ref MDBX_reader_list_func function.
 * \param [in] ctx     An arbitrary context pointer for the enumeration
 *                     function.
 *
 * \returns A non-zero error value on failure and 0 on success,
 * or \ref MDBX_RESULT_TRUE if the reader lock table is empty. */
LIBMDBX_API int mdbx_reader_list(const MDBX_env *env,
                                 MDBX_reader_list_func *func, void *ctx);

/** \brief Check for stale entries in the reader lock table.
 * \ingroup c_extra
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [out] dead   Number of stale slots that were cleared.
 *
 * \returns A non-zero error value on failure and 0 on success,
 * or \ref MDBX_RESULT_TRUE if a dead reader(s) found or mutex was recovered. */
LIBMDBX_API int mdbx_reader_check(MDBX_env *env, int *dead);

/** \brief Returns a lag of the reading for the given transaction.
 * \ingroup c_statinfo
 *
 * Returns an information for estimate how much given read-only
 * transaction is lagging relative the to actual head.
 * \deprecated Please use \ref mdbx_txn_info() instead.
 *
 * \param [in] txn       A transaction handle returned by \ref mdbx_txn_begin().
 * \param [out] percent  Percentage of page allocation in the database.
 *
 * \returns Number of transactions committed after the given was started for
 *          read, or negative value on failure. */
MDBX_DEPRECATED LIBMDBX_API int mdbx_txn_straggler(const MDBX_txn *txn,
                                                   int *percent);

/** \brief Registers the current thread as a reader for the environment.
 * \ingroup c_extra
 *
 * To perform read operations without blocking, a reader slot must be assigned
 * for each thread. However, this assignment requires a short-term lock
 * acquisition which is performed automatically. This function allows you to
 * assign the reader slot in advance and thus avoid capturing the blocker when
 * the read transaction starts firstly from current thread.
 * \see mdbx_thread_unregister()
 *
 * \note Threads are registered automatically the first time a read transaction
 *       starts. Therefore, there is no need to use this function, except in
 *       special cases.
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 *
 * \returns A non-zero error value on failure and 0 on success,
 * or \ref MDBX_RESULT_TRUE if thread is already registered. */
LIBMDBX_API int mdbx_thread_register(const MDBX_env *env);

/** \brief Unregisters the current thread as a reader for the environment.
 * \ingroup c_extra
 *
 * To perform read operations without blocking, a reader slot must be assigned
 * for each thread. However, the assigned reader slot will remain occupied until
 * the thread ends or the environment closes. This function allows you to
 * explicitly release the assigned reader slot.
 * \see mdbx_thread_register()
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 *
 * \returns A non-zero error value on failure and 0 on success, or
 * \ref MDBX_RESULT_TRUE if thread is not registered or already unregistered. */
LIBMDBX_API int mdbx_thread_unregister(const MDBX_env *env);

/** \brief A Handle-Slow-Readers callback function to resolve database
 * full/overflow issue due to a reader(s) which prevents the old data from being
 * recycled.
 * \ingroup c_err
 *
 * Read transactions prevent reuse of pages freed by newer write transactions,
 * thus the database can grow quickly. This callback will be called when there
 * is not enough space in the database (i.e. before increasing the database size
 * or before \ref MDBX_MAP_FULL error) and thus can be used to resolve issues
 * with a "long-lived" read transactions.
 * \see mdbx_env_set_hsr()
 * \see mdbx_env_get_hsr()
 * \see mdbx_txn_park()
 * \see <a href="intro.html#long-lived-read">Long-lived read transactions</a>
 *
 * Using this callback you can choose how to resolve the situation:
 *   - abort the write transaction with an error;
 *   - wait for the read transaction(s) to complete;
 *   - notify a thread performing a long-lived read transaction
 *     and wait for an effect;
 *   - kill the thread or whole process that performs the long-lived read
 *     transaction;
 *
 * Depending on the arguments and needs, your implementation may wait,
 * terminate a process or thread that is performing a long read, or perform
 * some other action. In doing so it is important that the returned code always
 * corresponds to the performed action.
 *
 * \param [in] env     An environment handle returned by \ref mdbx_env_create().
 * \param [in] txn     The current write transaction which internally at
 *                     the \ref MDBX_MAP_FULL condition.
 * \param [in] pid     A pid of the reader process.
 * \param [in] tid     A thread_id of the reader thread.
 * \param [in] laggard An oldest read transaction number on which stalled.
 * \param [in] gap     A lag from the last committed txn.
 * \param [in] space   A space that actually become available for reuse after
 *                     this reader finished. The callback function can take
 *                     this value into account to evaluate the impact that
 *                     a long-running transaction has.
 * \param [in] retry   A retry number starting from 0.
 *                     If callback has returned 0 at least once, then at end of
 *                     current handling loop the callback function will be
 *                     called additionally with negative `retry` value to notify
 *                     about the end of loop. The callback function can use this
 *                     fact to implement timeout reset logic while waiting for
 *                     a readers.
 *
 * \returns The RETURN CODE determines the further actions libmdbx and must
 *          match the action which was executed by the callback:
 *
 * \retval -2 or less  An error condition and the reader was not killed.
 *
 * \retval -1          The callback was unable to solve the problem and
 *                     agreed on \ref MDBX_MAP_FULL error;
 *                     libmdbx should increase the database size or
 *                     return \ref MDBX_MAP_FULL error.
 *
 * \retval 0 (zero)    The callback solved the problem or just waited for
 *                     a while, libmdbx should rescan the reader lock table and
 *                     retry. This also includes a situation when corresponding
 *                     transaction terminated in normal way by
 *                     \ref mdbx_txn_abort() or \ref mdbx_txn_reset(),
 *                     and my be restarted. I.e. reader slot don't needed
 *                     to be cleaned from transaction.
 *
 * \retval 1           Transaction aborted asynchronous and reader slot
 *                     should be cleared immediately, i.e. read transaction
 *                     will not continue but \ref mdbx_txn_abort()
 *                     nor \ref mdbx_txn_reset() will be called later.
 *
 * \retval 2 or great  The reader process was terminated or killed,
 *                     and libmdbx should entirely reset reader registration.
 */
typedef int(MDBX_hsr_func)(const MDBX_env *env, const MDBX_txn *txn,
                           mdbx_pid_t pid, mdbx_tid_t tid, uint64_t laggard,
                           unsigned gap, size_t space,
                           int retry) MDBX_CXX17_NOEXCEPT;

/** \brief Sets a Handle-Slow-Readers callback to resolve database full/overflow
 * issue due to a reader(s) which prevents the old data from being recycled.
 * \ingroup c_err
 *
 * The callback will only be triggered when the database is full due to a
 * reader(s) prevents the old data from being recycled.
 *
 * \see MDBX_hsr_func
 * \see mdbx_env_get_hsr()
 * \see mdbx_txn_park()
 * \see <a href="intro.html#long-lived-read">Long-lived read transactions</a>
 *
 * \param [in] env             An environment handle returned
 *                             by \ref mdbx_env_create().
 * \param [in] hsr_callback    A \ref MDBX_hsr_func function
 *                             or NULL to disable.
 *
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_env_set_hsr(MDBX_env *env, MDBX_hsr_func *hsr_callback);

/** \brief Gets current Handle-Slow-Readers callback used to resolve database
 * full/overflow issue due to a reader(s) which prevents the old data from being
 * recycled.
 * \see MDBX_hsr_func
 * \see mdbx_env_set_hsr()
 * \see mdbx_txn_park()
 * \see <a href="intro.html#long-lived-read">Long-lived read transactions</a>
 *
 * \param [in] env   An environment handle returned by \ref mdbx_env_create().
 *
 * \returns A MDBX_hsr_func function or NULL if disabled
 *          or something wrong. */
MDBX_NOTHROW_PURE_FUNCTION LIBMDBX_API MDBX_hsr_func *
mdbx_env_get_hsr(const MDBX_env *env);

/** \defgroup chk Checking and Recovery
 * Basically this is internal API for `mdbx_chk` tool, etc.
 * You should avoid to use it, except some extremal special cases.
 * \ingroup c_extra
 * @{ */

/** \brief Acquires write-transaction lock.
 * Provided for custom and/or complex locking scenarios.
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_lock(MDBX_env *env, bool dont_wait);

/** \brief Releases write-transaction lock.
 * Provided for custom and/or complex locking scenarios.
 * \returns A non-zero error value on failure and 0 on success. */
LIBMDBX_API int mdbx_txn_unlock(MDBX_env *env);

/** \brief Open an environment instance using specific meta-page
 * for checking and recovery.
 *
 * This function mostly of internal API for `mdbx_chk` utility and subject to
 * change at any time. Do not use this function to avoid shooting your own
 * leg(s).
 *
 * \note On Windows the \ref mdbx_env_open_for_recoveryW() is recommended
 * to use. */
LIBMDBX_API int mdbx_env_open_for_recovery(MDBX_env *env, const char *pathname,
                                           unsigned target_meta,
                                           bool writeable);

#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_env_open_for_recovery()
 * \ingroup c_extra
 * \note Available only on Windows.
 * \see mdbx_env_open_for_recovery() */
LIBMDBX_API int mdbx_env_open_for_recoveryW(MDBX_env *env,
                                            const wchar_t *pathname,
                                            unsigned target_meta,
                                            bool writeable);
#define mdbx_env_open_for_recoveryT(env, pathname, target_mets, writeable)     \
  mdbx_env_open_for_recoveryW(env, pathname, target_mets, writeable)
#else
#define mdbx_env_open_for_recoveryT(env, pathname, target_mets, writeable)     \
  mdbx_env_open_for_recovery(env, pathname, target_mets, writeable)
#endif /* Windows */

/** \brief Turn database to the specified meta-page.
 *
 * This function mostly of internal API for `mdbx_chk` utility and subject to
 * change at any time. Do not use this function to avoid shooting your own
 * leg(s). */
LIBMDBX_API int mdbx_env_turn_for_recovery(MDBX_env *env, unsigned target_meta);

/** \brief Получает базовую информацию о БД не открывая её.
 * \ingroup c_opening
 *
 * Назначение функции в получении базовой информации без открытия БД и
 * отображения данных в память (что может быть достаточно затратным действием
 * для ядра ОС). Полученная таким образом информация может быть полезной для
 * подстройки опций работы с БД перед её открытием, а также в сценариях файловых
 * менеджерах и прочих вспомогательных утилитах.
 *
 * \todo Добавить в API возможность установки обратного вызова для ревизии опций
 *       работы с БД в процессе её открытия (при удержании блокировок).
 *
 * \param [in]  pathname  Путь к директории или файлу БД.
 * \param [out] info      Указатель на структуру \ref MDBX_envinfo
 *                        для получения информации.
 * \param [in] bytes      Актуальный размер структуры \ref MDBX_envinfo, это
 *                        значение используется для обеспечения совместимости
 *                        ABI.
 *
 * \note Заполняется только некоторые поля структуры \ref MDBX_envinfo, значения
 * которых возможно получить без отображения файлов БД в память и без захвата
 * блокировок: размер страницы БД, геометрия БД, размер распределенного места
 * (номер последней распределенной страницы), номер последней транзакции и
 * boot-id.
 *
 * \warning Полученная информация является снимком на время выполнения функции и
 * может быть в любой момент изменена работающим с БД процессом. В том числе,
 * нет препятствий к тому, чтобы другой процесс удалил БД и создал её заново с
 * другим размером страницы и/или изменением любых других параметров.
 *
 * \returns Ненулевое значение кода ошибки, либо 0 при успешном выполнении. */
LIBMDBX_API int mdbx_preopen_snapinfo(const char *pathname, MDBX_envinfo *info,
                                      size_t bytes);
#if defined(_WIN32) || defined(_WIN64) || defined(DOXYGEN)
/** \copydoc mdbx_preopen_snapinfo()
 * \ingroup c_opening
 * \note Available only on Windows.
 * \see mdbx_preopen_snapinfo() */
LIBMDBX_API int mdbx_preopen_snapinfoW(const wchar_t *pathname,
                                       MDBX_envinfo *info, size_t bytes);
#define mdbx_preopen_snapinfoT(pathname, info, bytes)                          \
  mdbx_preopen_snapinfoW(pathname, info, bytes)
#else
#define mdbx_preopen_snapinfoT(pathname, info, bytes)                          \
  mdbx_preopen_snapinfo(pathname, info, bytes)
#endif /* Windows */

/** \brief Флаги/опции для проверки целостности базы данных.
 * \note Данный API еще не зафиксирован, в последующих версиях могут быть
 * незначительные доработки и изменения.
 * \see mdbx_env_chk() */
typedef enum MDBX_chk_flags {
  /** Режим проверки по-умолчанию, в том числе в режиме только-чтения. */
  MDBX_CHK_DEFAULTS = 0,

  /** Проверка в режиме чтения-записи, с захватом блокировки и приостановки
   * пишущих транзакций. */
  MDBX_CHK_READWRITE = 1,

  /** Пропустить обход дерева страниц. */
  MDBX_CHK_SKIP_BTREE_TRAVERSAL = 2,

  /** Пропустить просмотр записей ключ-значение. */
  MDBX_CHK_SKIP_KV_TRAVERSAL = 4,

  /** Игнорировать порядок ключей и записей.
   * \note Требуется при проверке унаследованных БД созданных с использованием
   * нестандартных (пользовательских) функций сравнения ключей или значений. */
  MDBX_CHK_IGNORE_ORDER = 8
} MDBX_chk_flags_t;
DEFINE_ENUM_FLAG_OPERATORS(MDBX_chk_flags)

/** \brief Уровни логирование/детализации информации,
 * поставляемой через обратные вызовы при проверке целостности базы данных.
 * \see mdbx_env_chk() */
typedef enum MDBX_chk_severity {
  MDBX_chk_severity_prio_shift = 4,
  MDBX_chk_severity_kind_mask = 0xF,
  MDBX_chk_fatal = 0x00u,
  MDBX_chk_error = 0x11u,
  MDBX_chk_warning = 0x22u,
  MDBX_chk_notice = 0x33u,
  MDBX_chk_result = 0x44u,
  MDBX_chk_resolution = 0x55u,
  MDBX_chk_processing = 0x56u,
  MDBX_chk_info = 0x67u,
  MDBX_chk_verbose = 0x78u,
  MDBX_chk_details = 0x89u,
  MDBX_chk_extra = 0x9Au
} MDBX_chk_severity_t;

/** \brief Стадии проверки,
 * сообщаемые через обратные вызовы при проверке целостности базы данных.
 * \see mdbx_env_chk() */
typedef enum MDBX_chk_stage {
  MDBX_chk_none,
  MDBX_chk_init,
  MDBX_chk_lock,
  MDBX_chk_meta,
  MDBX_chk_tree,
  MDBX_chk_gc,
  MDBX_chk_space,
  MDBX_chk_maindb,
  MDBX_chk_tables,
  MDBX_chk_conclude,
  MDBX_chk_unlock,
  MDBX_chk_finalize
} MDBX_chk_stage_t;

/** \brief Виртуальная строка отчета, формируемого при проверке целостности базы
 * данных. \see mdbx_env_chk() */
typedef struct MDBX_chk_line {
  struct MDBX_chk_context *ctx;
  uint8_t severity, scope_depth, empty;
  char *begin, *end, *out;
} MDBX_chk_line_t;

/** \brief Проблема обнаруженная при проверке целостности базы данных.
 * \see mdbx_env_chk() */
typedef struct MDBX_chk_issue {
  struct MDBX_chk_issue *next;
  size_t count;
  const char *caption;
} MDBX_chk_issue_t;

/** \brief Иерархический контекст при проверке целостности базы данных.
 * \see mdbx_env_chk() */
typedef struct MDBX_chk_scope {
  MDBX_chk_issue_t *issues;
  struct MDBX_chk_internal *internal;
  const void *object;
  MDBX_chk_stage_t stage;
  MDBX_chk_severity_t verbosity;
  size_t subtotal_issues;
  union {
    void *ptr;
    size_t number;
  } usr_z, usr_v, usr_o;
} MDBX_chk_scope_t;

/** \brief Пользовательский тип для привязки дополнительных данных,
 * связанных с некоторой таблицей ключ-значение, при проверке целостности базы
 * данных. \see mdbx_env_chk() */
typedef struct MDBX_chk_user_table_cookie MDBX_chk_user_table_cookie_t;

/** \brief Гистограмма с некоторой статистической информацией,
 * собираемой при проверке целостности БД.
 * \see mdbx_env_chk() */
struct MDBX_chk_histogram {
  size_t amount, count, ones, pad;
  struct {
    size_t begin, end, amount, count;
  } ranges[9];
};

/** \brief Информация о некоторой таблицей ключ-значение,
 * при проверке целостности базы данных.
 * \see mdbx_env_chk() */
typedef struct MDBX_chk_table {
  MDBX_chk_user_table_cookie_t *cookie;

/** \brief Pseudo-name for MainDB */
#define MDBX_CHK_MAIN ((void *)((ptrdiff_t)0))
/** \brief Pseudo-name for GarbageCollectorDB */
#define MDBX_CHK_GC ((void *)((ptrdiff_t)-1))
/** \brief Pseudo-name for MetaPages */
#define MDBX_CHK_META ((void *)((ptrdiff_t)-2))

  MDBX_val name;
  MDBX_db_flags_t flags;
  int id;

  size_t payload_bytes, lost_bytes;
  struct {
    size_t all, empty, other;
    size_t branch, leaf;
    size_t nested_branch, nested_leaf, nested_subleaf;
  } pages;
  struct {
    /// Tree deep histogram
    struct MDBX_chk_histogram deep;
    /// Histogram of large/overflow pages length
    struct MDBX_chk_histogram large_pages;
    /// Histogram of nested trees height, span length for GC
    struct MDBX_chk_histogram nested_tree;
    /// Keys length histogram
    struct MDBX_chk_histogram key_len;
    /// Values length histogram
    struct MDBX_chk_histogram val_len;
  } histogram;
} MDBX_chk_table_t;

/** \brief Контекст проверки целостности базы данных.
 * \see mdbx_env_chk() */
typedef struct MDBX_chk_context {
  struct MDBX_chk_internal *internal;
  MDBX_env *env;
  MDBX_txn *txn;
  MDBX_chk_scope_t *scope;
  uint8_t scope_nesting;
  struct {
    size_t total_payload_bytes;
    size_t table_total, table_processed;
    size_t total_unused_bytes, unused_pages;
    size_t processed_pages, reclaimable_pages, gc_pages, alloc_pages,
        backed_pages;
    size_t problems_meta, tree_problems, gc_tree_problems, kv_tree_problems,
        problems_gc, problems_kv, total_problems;
    uint64_t steady_txnid, recent_txnid;
    /** Указатель на массив размером table_total с указателями на экземпляры
     * структур MDBX_chk_table_t с информацией о всех таблицах ключ-значение,
     * включая MainDB и GC/FreeDB. */
    const MDBX_chk_table_t *const *tables;
  } result;
} MDBX_chk_context_t;

/** \brief Набор функций обратного вызова используемых при проверке целостности
 * базы данных.
 *
 * Функции обратного вызова предназначены для организации взаимодействия с кодом
 * приложения. В том числе, для интеграции логики приложения проверяющей
 * целостность стуктуры данных выше уровня ключ-значение, подготовки и
 * структурированного вывода информации как о ходе, так и результатов проверки.
 *
 * Все функции обратного вызова опциональны, неиспользуемые указатели должны
 * быть установлены в `nullptr`.
 *
 * \note Данный API еще не зафиксирован, в последующих версиях могут быть
 * незначительные доработки и изменения.
 *
 * \see mdbx_env_chk() */
typedef struct MDBX_chk_callbacks {
  bool (*check_break)(MDBX_chk_context_t *ctx);
  int (*scope_push)(MDBX_chk_context_t *ctx, MDBX_chk_scope_t *outer,
                    MDBX_chk_scope_t *inner, const char *fmt, va_list args);
  int (*scope_conclude)(MDBX_chk_context_t *ctx, MDBX_chk_scope_t *outer,
                        MDBX_chk_scope_t *inner, int err);
  void (*scope_pop)(MDBX_chk_context_t *ctx, MDBX_chk_scope_t *outer,
                    MDBX_chk_scope_t *inner);
  void (*issue)(MDBX_chk_context_t *ctx, const char *object,
                uint64_t entry_number, const char *issue, const char *extra_fmt,
                va_list extra_args);
  MDBX_chk_user_table_cookie_t *(*table_filter)(MDBX_chk_context_t *ctx,
                                                const MDBX_val *name,
                                                MDBX_db_flags_t flags);
  int (*table_conclude)(MDBX_chk_context_t *ctx, const MDBX_chk_table_t *table,
                        MDBX_cursor *cursor, int err);
  void (*table_dispose)(MDBX_chk_context_t *ctx, const MDBX_chk_table_t *table);

  int (*table_handle_kv)(MDBX_chk_context_t *ctx, const MDBX_chk_table_t *table,
                         size_t entry_number, const MDBX_val *key,
                         const MDBX_val *value);

  int (*stage_begin)(MDBX_chk_context_t *ctx, MDBX_chk_stage_t);
  int (*stage_end)(MDBX_chk_context_t *ctx, MDBX_chk_stage_t, int err);

  MDBX_chk_line_t *(*print_begin)(MDBX_chk_context_t *ctx,
                                  MDBX_chk_severity_t severity);
  void (*print_flush)(MDBX_chk_line_t *);
  void (*print_done)(MDBX_chk_line_t *);
  void (*print_chars)(MDBX_chk_line_t *, const char *str, size_t len);
  void (*print_format)(MDBX_chk_line_t *, const char *fmt, va_list args);
  void (*print_size)(MDBX_chk_line_t *, const char *prefix,
                     const uint64_t value, const char *suffix);
} MDBX_chk_callbacks_t;

/** \brief Проверяет целостность базы данных.
 *
 * Взаимодействие с кодом приложения реализуется через функции обратного вызова,
 * предоставляемые приложением посредством параметра `cb`. В ходе такого
 * взаимодействия приложение может контролировать ход проверки, в том числе,
 * пропускать/фильтровать обработку отдельных элементов, а также реализовать
 * дополнительную верификацию структуры и/или информации с учетом назначения и
 * семантической значимости для приложения. Например, приложение может выполнить
 * проверку собственных индексов и корректность записей в БД. Именно с этой
 * целью функционал проверки целостности был доработан для интенсивного
 * использования обратных вызовов и перенесен из утилиты `mdbx_chk` в основную
 * библиотеку.
 *
 * Проверка выполняется в несколько стадий, начиная с инициализации и до
 * завершения, более подробно см \ref MDBX_chk_stage_t. О начале и завершении
 * каждой стадии код приложения уведомляется через соответствующие функции
 * обратного вызова, более подробно см \ref MDBX_chk_callbacks_t.
 *
 * \param [in] env        Указатель на экземпляр среды.
 * \param [in] cb         Набор функций обратного вызова.
 * \param [in,out] ctx    Контекст проверки целостности базы данных,
 *                        где будут формироваться результаты проверки.
 * \param [in] flags      Флаги/опции проверки целостности базы данных.
 * \param [in] verbosity  Необходимый уровень детализации информации о ходе
 *                        и результатах проверки.
 * \param [in] timeout_seconds_16dot16  Ограничение длительности в 1/65536 долях
 *                        секунды для выполнения проверки,
 *                        либо 0 при отсутствии ограничения.
 * \returns Нулевое значение в случае успеха, иначе код ошибки. */
LIBMDBX_API int mdbx_env_chk(MDBX_env *env, const MDBX_chk_callbacks_t *cb,
                             MDBX_chk_context_t *ctx,
                             const MDBX_chk_flags_t flags,
                             MDBX_chk_severity_t verbosity,
                             unsigned timeout_seconds_16dot16);

/** \brief Вспомогательная функция для подсчета проблем детектируемых
 * приложением, в том числе, поступающим к приложению через логирование.
 * \see mdbx_env_chk()
 * \see MDBX_debug_func
 * \returns Нулевое значение в случае успеха, иначе код ошибки. */
LIBMDBX_API int mdbx_env_chk_encount_problem(MDBX_chk_context_t *ctx);

/** end of chk @} */

/** end of c_api @} */

#ifdef __cplusplus
} /* extern "C" */
#endif

#endif /* LIBMDBX_H */