rusqlite/src/backup.rs

//! Online SQLite backup API.
//!
//! To create a `Backup`, you must have two distinct `SqliteConnection`s - one
//! for the source (which can be used while the backup is running) and one for
//! the destination (which cannot).  A `Backup` handle exposes three methods:
//! `step` will attempt to back up a specified number of pages, `progress` gets
//! the current progress of the backup as of the last call to `step`, and
//! `run_to_completion` will attempt to back up the entire source database,
//! allowing you to specify how many pages are backed up at a time and how long
//! the thread should sleep between chunks of pages.
//!
//! The following example is equivalent to "Example 2: Online Backup of a
//! Running Database" from [SQLite's Online Backup API
//! documentation](https://www.sqlite.org/backup.html).
//!
//! ```rust,no_run
//! # use rusqlite::{backup, SqliteConnection, SqliteResult};
//! # use std::path::Path;
//! # use std::time;
//!
//! fn backupDb<P: AsRef<Path>>(src: &SqliteConnection, dst: P, progress: fn(backup::Progress))
//!     -> SqliteResult<()> {
//!     let mut dst = try!(SqliteConnection::open(dst));
//!     let backup = try!(backup::Backup::new(src, &mut dst));
//!     backup.run_to_completion(5, time::Duration::from_millis(250), Some(progress))
//! }
//! ```

use std::marker::PhantomData;

use libc::c_int;
use std::thread;
use std::time::Duration;

use ffi;

use {DatabaseName, SqliteConnection, SqliteError, SqliteResult};

/// Possible successful results of calling `Backup::step`.
pub enum StepResult {
    /// The backup is complete.
    Done,

    /// The step was successful but there are still more pages that need to be backed up.
    More,

    /// The step failed because appropriate locks could not be aquired. This is
    /// not a fatal error - the step can be retried.
    Busy,

    /// The step failed because the source connection was writing to the
    /// database. This is not a fatal error - the step can be retried.
    Locked,
}

/// Struct specifying the progress of a backup. The percentage completion can
/// be calculated as `(pagecount - remaining) / pagecount`. The progress of a
/// backup is as of the last call to `step` - if the source database is
/// modified after a call to `step`, the progress value will become outdated
/// and potentially incorrect.
#[derive(Copy,Clone,Debug)]
pub struct Progress {
    /// Number of pages in the source database that still need to be backed up.
    pub remaining: c_int,
    /// Total number of pages in the source database.
    pub pagecount: c_int,
}

/// A handle to an online backup.
pub struct Backup<'a, 'b> {
    phantom_from: PhantomData<&'a ()>,
    phantom_to: PhantomData<&'b ()>,
    b: *mut ffi::sqlite3_backup,
}

impl<'a, 'b> Backup<'a, 'b> {
    /// Attempt to create a new handle that will allow backups from `from` to
    /// `to`. Note that `to` is a `&mut` - this is because SQLite forbids any
    /// API calls on the destination of a backup while the backup is taking
    /// place.
    ///
    /// # Failure
    ///
    /// Will return `Err` if the underlying `sqlite3_backup_init` call returns
    /// `NULL`.
    pub fn new(from: &'a SqliteConnection,
               to: &'b mut SqliteConnection)
               -> SqliteResult<Backup<'a, 'b>> {
        Backup::new_with_names(from, DatabaseName::Main, to, DatabaseName::Main)
    }

    /// Attempt to create a new handle that will allow backups from the
    /// `from_name` database of `from` to the `to_name` database of `to`. Note
    /// that `to` is a `&mut` - this is because SQLite forbids any API calls on
    /// the destination of a backup while the backup is taking place.
    ///
    /// # Failure
    ///
    /// Will return `Err` if the underlying `sqlite3_backup_init` call returns
    /// `NULL`.
    pub fn new_with_names(from: &'a SqliteConnection,
                          from_name: DatabaseName,
                          to: &'b mut SqliteConnection,
                          to_name: DatabaseName)
                          -> SqliteResult<Backup<'a, 'b>> {
        let to_name = try!(to_name.to_cstring());
        let from_name = try!(from_name.to_cstring());

        let to_db = to.db.borrow_mut().db;

        let b = unsafe {
            let b = ffi::sqlite3_backup_init(to_db,
                                             to_name.as_ptr(),
                                             from.db.borrow_mut().db,
                                             from_name.as_ptr());
            if b.is_null() {
                return Err(SqliteError::from_handle(to_db, ffi::sqlite3_errcode(to_db)));
            }
            b
        };

        Ok(Backup {
            phantom_from: PhantomData,
            phantom_to: PhantomData,
            b: b,
        })
    }

    /// Gets the progress of the backup as of the last call to `step`.
    pub fn progress(&self) -> Progress {
        unsafe {
            Progress {
                remaining: ffi::sqlite3_backup_remaining(self.b),
                pagecount: ffi::sqlite3_backup_pagecount(self.b),
            }
        }
    }

    /// Attempts to back up the given number of pages. If `num_pages` is
    /// negative, will attempt to back up all remaining pages. This will hold a
    /// lock on the source database for the duration, so it is probably not
    /// what you want for databases that are currently active (see
    /// `run_to_completion` for a better alternative).
    ///
    /// # Failure
    ///
    /// Will return `Err` if the underlying `sqlite3_backup_step` call returns
    /// an error code other than `DONE`, `OK`, `BUSY`, or `LOCKED`. `BUSY` and
    /// `LOCKED` are transient errors and are therefore returned as possible
    /// `Ok` values.
    pub fn step(&self, num_pages: c_int) -> SqliteResult<StepResult> {
        use self::StepResult::{Done, More, Busy, Locked};

        let rc = unsafe { ffi::sqlite3_backup_step(self.b, num_pages) };
        match rc {
            ffi::SQLITE_DONE => Ok(Done),
            ffi::SQLITE_OK => Ok(More),
            ffi::SQLITE_BUSY => Ok(Busy),
            ffi::SQLITE_LOCKED => Ok(Locked),
            rc => {
                Err(SqliteError {
                    code: rc,
                    message: ffi::code_to_str(rc).into(),
                })
            }
        }
    }

    /// Attempts to run the entire backup. Will call `step(pages_per_step)` as
    /// many times as necessary, sleeping for `pause_between_pages` between
    /// each call to give the source database time to process any pending
    /// queries. This is a direct implementation of "Example 2: Online Backup
    /// of a Running Database" from [SQLite's Online Backup API
    /// documentation](https://www.sqlite.org/backup.html).
    ///
    /// If `progress` is not `None`, it will be called after each step with the
    /// current progress of the backup. Note that is possible the progress may
    /// not change if the step returns `Busy` or `Locked` even though the
    /// backup is still running.
    ///
    /// # Failure
    ///
    /// Will return `Err` if any of the calls to `step` return `Err`.
    pub fn run_to_completion(&self,
                             pages_per_step: c_int,
                             pause_between_pages: Duration,
                             progress: Option<fn(Progress)>)
                             -> SqliteResult<()> {
        use self::StepResult::{Done, More, Busy, Locked};

        assert!(pages_per_step > 0, "pages_per_step must be positive");

        loop {
            let r = try!(self.step(pages_per_step));
            if let Some(progress) = progress {
                progress(self.progress())
            }
            match r {
                More | Busy | Locked => thread::sleep(pause_between_pages),
                Done => return Ok(()),
            }
        }
    }
}

impl<'a, 'b> Drop for Backup<'a, 'b> {
    fn drop(&mut self) {
        unsafe { ffi::sqlite3_backup_finish(self.b) };
    }
}

#[cfg(test)]
mod test {
    use {SqliteConnection, DatabaseName};
    use std::time::Duration;
    use super::Backup;

    #[test]
    #[cfg_attr(rustfmt, rustfmt_skip)]
    fn test_backup() {
        let src = SqliteConnection::open_in_memory().unwrap();
        let sql = "BEGIN;
                   CREATE TABLE foo(x INTEGER);
                   INSERT INTO foo VALUES(42);
                   END;";
        src.execute_batch(sql).unwrap();

        let mut dst = SqliteConnection::open_in_memory().unwrap();

        {
            let backup = Backup::new(&src, &mut dst).unwrap();
            backup.step(-1).unwrap();
        }

        let the_answer = dst.query_row("SELECT x FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42, the_answer);

        src.execute_batch("INSERT INTO foo VALUES(43)").unwrap();

        {
            let backup = Backup::new(&src, &mut dst).unwrap();
            backup.run_to_completion(5, Duration::from_millis(250), None).unwrap();
        }

        let the_answer = dst.query_row("SELECT SUM(x) FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42 + 43, the_answer);
    }

    #[test]
    #[cfg_attr(rustfmt, rustfmt_skip)]
    fn test_backup_temp() {
        let src = SqliteConnection::open_in_memory().unwrap();
        let sql = "BEGIN;
                   CREATE TEMPORARY TABLE foo(x INTEGER);
                   INSERT INTO foo VALUES(42);
                   END;";
        src.execute_batch(sql).unwrap();

        let mut dst = SqliteConnection::open_in_memory().unwrap();

        {
            let backup = Backup::new_with_names(&src,
                                                DatabaseName::Temp,
                                                &mut dst,
                                                DatabaseName::Main)
                             .unwrap();
            backup.step(-1).unwrap();
        }

        let the_answer = dst.query_row("SELECT x FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42, the_answer);

        src.execute_batch("INSERT INTO foo VALUES(43)").unwrap();

        {
            let backup = Backup::new_with_names(&src,
                                                DatabaseName::Temp,
                                                &mut dst,
                                                DatabaseName::Main)
                             .unwrap();
            backup.run_to_completion(5, Duration::from_millis(250), None).unwrap();
        }

        let the_answer = dst.query_row("SELECT SUM(x) FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42 + 43, the_answer);
    }

    #[test]
    #[cfg_attr(rustfmt, rustfmt_skip)]
    fn test_backup_attached() {
        let src = SqliteConnection::open_in_memory().unwrap();
        let sql = "ATTACH DATABASE ':memory:' AS my_attached;
                   BEGIN;
                   CREATE TABLE my_attached.foo(x INTEGER);
                   INSERT INTO my_attached.foo VALUES(42);
                   END;";
        src.execute_batch(sql).unwrap();

        let mut dst = SqliteConnection::open_in_memory().unwrap();

        {
            let backup = Backup::new_with_names(&src,
                                                DatabaseName::Attached("my_attached"),
                                                &mut dst,
                                                DatabaseName::Main)
                             .unwrap();
            backup.step(-1).unwrap();
        }

        let the_answer = dst.query_row("SELECT x FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42, the_answer);

        src.execute_batch("INSERT INTO foo VALUES(43)").unwrap();

        {
            let backup = Backup::new_with_names(&src,
                                                DatabaseName::Attached("my_attached"),
                                                &mut dst,
                                                DatabaseName::Main)
                             .unwrap();
            backup.run_to_completion(5, Duration::from_millis(250), None).unwrap();
        }

        let the_answer = dst.query_row("SELECT SUM(x) FROM foo", &[], |r| r.get::<i64>(0)).unwrap();
        assert_eq!(42 + 43, the_answer);
    }
}